Double
This endorsement is required if the driver will pull two or three trailers. To receive this endorsement, applicants must pass a test. The test consists of 20 multiple choice questions. To pass, the applicant must answer at least 16 questions correctly. Each question has three or four possible answer choices. Test questions come from the Alabama Commercial Driver License Manual. Questions come from chapters covering: Driving Safely, Air Brakes (if applicable), Combination Vehicles and Doubles and Triples. The Double/Triple endorsement can be used with the Class A CDL.
Number of Question
Passing Score
15. Convex mirrors:
Explanation
Many large vehicles have curved, convex mirrors. Convex mirrors allow drivers to see a wider area than flat mirrors. However, they also make objects seem smaller and farther away than they really are.
16. If your vehicle gets stuck on railroad tracks, you should:
Explanation
If your vehicle gets stuck on railroad tracks for any reason, you should immediately exit the vehicle and walk away from the tracks. Contact the proper emergency authorities.
17. The suspension system:
Explanation
The suspension system holds up the vehicle and its load while keeping the axles in place. Damage to a suspension system can be very dangerous.
18. Doubles and triples:
Explanation
To avoid rolling over and jackknifing, doubles and triples must be driven smoothly. To allow this, drivers should look well ahead of their vehicles so they can spot hazards early and have as much time as possible to make the necessary maneuvers.
19. To warn drivers behind you that you will be slowing down, you should:
Explanation
To let drivers behind you know that you plan to slow down, lightly tap your brake pedal a few times to flash your brake lights. It is important to communicate your intentions to other drivers.
20. Pull out the trailer air supply control to test:
Explanation
Be sure to test the trailer emergency brakes before beginning a trip. After ensuring that the trailer rolls freely, you can test the emergency brakes by pulling out the trailer air supply control, or placing it in the "emergency" position. Pull forward slightly with the tractor and make sure the trailer does not move.
Ranked by best match
Frequently Asked Questions
To obtain a CDL Doubles/Triples endorsement in Alabama, please follow the steps below:
Step 1: Obtain a Commercial Driver's License (CDL)
To apply for a CDL, you must be at least 18 years of age and have a valid Alabama driver's license. You must also pass a written knowledge test and a skills test. For more information on how to obtain a CDL in Alabama, please visit the Alabama Department of Public Safety website.
Step 2: Study for the Doubles/Triples endorsement exam
To obtain the Doubles/Triples endorsement, you must pass a written knowledge test specific to this endorsement. You can obtain study materials from the Alabama Department of Public Safety or from other study resources.
Step 3: Schedule and take the Doubles/Triples endorsement exam
Once you feel confident in your knowledge of doubles/triples driving, you can schedule an appointment to take the written test at your local Alabama Department of Public Safety office. The exam consists of 20 multiple-choice questions, and you must score at least 80% to pass.
Step 4: Pay the fee and receive your CDL with Doubles/Triples endorsement
If you pass the written test, you will need to pay the fee for the endorsement and wait for your CDL with Doubles/Triples endorsement to arrive in the mail.
Overall, obtaining a CDL with Doubles/Triples endorsement requires passing both a knowledge test and a skill test. It is important to thoroughly study and understand the rules and regulations related to driving doubles/triples before attempting to obtain this endorsement.
Step 1: Obtain a Commercial Driver's License (CDL)
To apply for a CDL, you must be at least 18 years of age and have a valid Alabama driver's license. You must also pass a written knowledge test and a skills test. For more information on how to obtain a CDL in Alabama, please visit the Alabama Department of Public Safety website.
Step 2: Study for the Doubles/Triples endorsement exam
To obtain the Doubles/Triples endorsement, you must pass a written knowledge test specific to this endorsement. You can obtain study materials from the Alabama Department of Public Safety or from other study resources.
Step 3: Schedule and take the Doubles/Triples endorsement exam
Once you feel confident in your knowledge of doubles/triples driving, you can schedule an appointment to take the written test at your local Alabama Department of Public Safety office. The exam consists of 20 multiple-choice questions, and you must score at least 80% to pass.
Step 4: Pay the fee and receive your CDL with Doubles/Triples endorsement
If you pass the written test, you will need to pay the fee for the endorsement and wait for your CDL with Doubles/Triples endorsement to arrive in the mail.
Overall, obtaining a CDL with Doubles/Triples endorsement requires passing both a knowledge test and a skill test. It is important to thoroughly study and understand the rules and regulations related to driving doubles/triples before attempting to obtain this endorsement.
To get a CDL Doubles/Triples license in Alabama, you must meet the following requirements:
1. Be at least 18 years old. However, you will be limited to intrastate (within Alabama) driving only. If you want to drive across state lines, you must be at least 21 years old.
2. Hold a valid Class A CDL license.
3. Pass the Doubles/Triples written knowledge test, which covers topics such as inspecting double/triple trailers, coupling and uncoupling, and safe driving practices.
4. Pass the Doubles/Triples skills test, which includes a pre-trip inspection, basic vehicle controls test, and an on-road driving test.
5. Submit a medical certificate or self-certification form to show that you meet the physical requirements for driving a commercial vehicle.
6. Pay the required fee for the Doubles/Triples endorsement.
It is important to note that obtaining a CDL Doubles/Triples license requires additional knowledge and skills beyond what is required for a standard CDL license. Therefore, it is recommended that you receive additional training and practice before attempting to take the endorsement exam.
1. Be at least 18 years old. However, you will be limited to intrastate (within Alabama) driving only. If you want to drive across state lines, you must be at least 21 years old.
2. Hold a valid Class A CDL license.
3. Pass the Doubles/Triples written knowledge test, which covers topics such as inspecting double/triple trailers, coupling and uncoupling, and safe driving practices.
4. Pass the Doubles/Triples skills test, which includes a pre-trip inspection, basic vehicle controls test, and an on-road driving test.
5. Submit a medical certificate or self-certification form to show that you meet the physical requirements for driving a commercial vehicle.
6. Pay the required fee for the Doubles/Triples endorsement.
It is important to note that obtaining a CDL Doubles/Triples license requires additional knowledge and skills beyond what is required for a standard CDL license. Therefore, it is recommended that you receive additional training and practice before attempting to take the endorsement exam.
Yes, you do need specific experience and training to obtain a CDL Doubles/Triples endorsement in Alabama.
First, to be eligible for the Doubles/Triples endorsement, you must already hold a Class A CDL license. This means that you have already undergone training and testing for the operation of a combination of vehicles with a gross vehicle weight rating (GVWR) of 26,001 pounds or more, including a towed vehicle with a GVWR of more than 10,000 pounds.
Second, to obtain the Doubles/Triples endorsement, you must pass both a written knowledge test and a skills test that are specific to driving double/triple trailers. The written test covers topics such as inspecting double/triple trailers, coupling and uncoupling procedures, and safe driving practices. The skills test includes a pre-trip inspection, basic vehicle controls test, and an on-road driving test.
It is highly recommended that you receive additional training and practice before attempting to take the Doubles/Triples endorsement exam. This may include taking a commercial driver training course or working with an experienced driver who can provide hands-on training in double/triple trailer operation.
First, to be eligible for the Doubles/Triples endorsement, you must already hold a Class A CDL license. This means that you have already undergone training and testing for the operation of a combination of vehicles with a gross vehicle weight rating (GVWR) of 26,001 pounds or more, including a towed vehicle with a GVWR of more than 10,000 pounds.
Second, to obtain the Doubles/Triples endorsement, you must pass both a written knowledge test and a skills test that are specific to driving double/triple trailers. The written test covers topics such as inspecting double/triple trailers, coupling and uncoupling procedures, and safe driving practices. The skills test includes a pre-trip inspection, basic vehicle controls test, and an on-road driving test.
It is highly recommended that you receive additional training and practice before attempting to take the Doubles/Triples endorsement exam. This may include taking a commercial driver training course or working with an experienced driver who can provide hands-on training in double/triple trailer operation.
Yes, to obtain a CDL Doubles/Triples endorsement in Alabama, you must pass an additional written test in addition to the standard Class A CDL written test. The additional written test is specific to double/triple trailer operation and covers topics such as:
1. Inspecting double/triple trailers
2. Coupling and uncoupling procedures
3. Safe driving practices for double/triple trailers
4. Weight distribution and cargo securement for double/triple trailers
5. Special driving considerations for double/triple trailers
In addition to the written test, you must also pass a skills test that includes a pre-trip inspection, basic vehicle controls test, and an on-road driving test using a double/triple trailer.
It's important to note that obtaining a CDL Doubles/Triples endorsement requires additional knowledge and skills beyond what is required for a standard Class A CDL license. Therefore, it's highly recommended that you receive additional training and practice before attempting to take the endorsement exam.
1. Inspecting double/triple trailers
2. Coupling and uncoupling procedures
3. Safe driving practices for double/triple trailers
4. Weight distribution and cargo securement for double/triple trailers
5. Special driving considerations for double/triple trailers
In addition to the written test, you must also pass a skills test that includes a pre-trip inspection, basic vehicle controls test, and an on-road driving test using a double/triple trailer.
It's important to note that obtaining a CDL Doubles/Triples endorsement requires additional knowledge and skills beyond what is required for a standard Class A CDL license. Therefore, it's highly recommended that you receive additional training and practice before attempting to take the endorsement exam.
To obtain a CDL Doubles/Triples endorsement in Alabama, you must pass a skills test that includes three parts: a pre-trip inspection, basic vehicle control test, and an on-road driving test.
During the basic vehicle control test, you will be required to demonstrate the following skills or maneuvers with a double/triple trailer:
1. Straight line backing: You will be required to back up your vehicle in a straight line for a distance of approximately 100 feet. This will demonstrate your ability to control the vehicle and maneuver it in a straight line.
2. Off-set backing: You will be required to back up your vehicle through a series of cones or markers that simulate an off-set alley. This will demonstrate your ability to maneuver the vehicle in tight spaces and navigate through obstacles.
3. Parallel parking: You will be required to park your vehicle parallel to a curb or other obstruction. This will demonstrate your ability to maneuver the vehicle in tight spaces and park it safely and accurately.
During the on-road driving test, you will be required to demonstrate the following skills or maneuvers with a double/triple trailer:
1. Lane changes: You will be required to safely change lanes while driving on a roadway with other vehicles present.
2. Turns: You will be required to make left and right turns safely and accurately.
3. Intersections: You will be required to navigate through intersections safely and follow all traffic laws and signals.
4. Overall control of the vehicle: Throughout the entire driving test, you will be evaluated on your overall control of the vehicle, including shifting gears, braking, accelerating, steering, and maintaining proper speed and following distance.
It's important to note that these skills or maneuvers are specific to double/triple trailer operation and require additional training and practice beyond what is required for a standard Class A CDL license. Therefore, it's highly recommended that you receive additional training and practice before attempting to take the endorsement exam.
During the basic vehicle control test, you will be required to demonstrate the following skills or maneuvers with a double/triple trailer:
1. Straight line backing: You will be required to back up your vehicle in a straight line for a distance of approximately 100 feet. This will demonstrate your ability to control the vehicle and maneuver it in a straight line.
2. Off-set backing: You will be required to back up your vehicle through a series of cones or markers that simulate an off-set alley. This will demonstrate your ability to maneuver the vehicle in tight spaces and navigate through obstacles.
3. Parallel parking: You will be required to park your vehicle parallel to a curb or other obstruction. This will demonstrate your ability to maneuver the vehicle in tight spaces and park it safely and accurately.
During the on-road driving test, you will be required to demonstrate the following skills or maneuvers with a double/triple trailer:
1. Lane changes: You will be required to safely change lanes while driving on a roadway with other vehicles present.
2. Turns: You will be required to make left and right turns safely and accurately.
3. Intersections: You will be required to navigate through intersections safely and follow all traffic laws and signals.
4. Overall control of the vehicle: Throughout the entire driving test, you will be evaluated on your overall control of the vehicle, including shifting gears, braking, accelerating, steering, and maintaining proper speed and following distance.
It's important to note that these skills or maneuvers are specific to double/triple trailer operation and require additional training and practice beyond what is required for a standard Class A CDL license. Therefore, it's highly recommended that you receive additional training and practice before attempting to take the endorsement exam.
No, you cannot legally operate a double/triple trailer without a CDL Doubles/Triples endorsement. A CDL Doubles/Triples endorsement is required for any driver operating a commercial motor vehicle with two or three trailers attached.
In Alabama, a Class A CDL with Doubles/Triples endorsement is required to operate a double/triple trailer combination with a total weight of over 26,001 pounds. This includes the weight of the vehicle and any cargo it is carrying.
Operating a double/triple trailer without the proper endorsement can result in fines, penalties, and even suspension of your CDL. It's important to obtain the proper endorsements and comply with all state and federal regulations to ensure safe and legal operation of commercial motor vehicles.
In Alabama, a Class A CDL with Doubles/Triples endorsement is required to operate a double/triple trailer combination with a total weight of over 26,001 pounds. This includes the weight of the vehicle and any cargo it is carrying.
Operating a double/triple trailer without the proper endorsement can result in fines, penalties, and even suspension of your CDL. It's important to obtain the proper endorsements and comply with all state and federal regulations to ensure safe and legal operation of commercial motor vehicles.
You can add the CDL Doubles/Triples endorsement to your existing CDL license in Alabama without applying for a new license. To add the endorsement, you will need to pass a written knowledge test and a skills test that specifically evaluates your ability to operate double/triple trailer combinations.
To obtain the endorsement, you must first pass the written knowledge test for Doubles/Triples. This test will cover topics such as coupling and uncoupling, inspecting double/triple trailers, and safe driving practices for operating a commercial motor vehicle with two or three trailers.
Once you have passed the written test, you can schedule a skills test with a certified CDL examiner. This skills test will evaluate your ability to operate a double/triple trailer combination safely and effectively.
If you successfully pass both tests, the CDL Doubles/Triples endorsement will be added to your existing CDL license. It's important to note that obtaining this endorsement requires additional training and practice beyond what is required for a standard Class A CDL license. Therefore, it's highly recommended that you receive additional training and practice before attempting to take the endorsement exams.
To obtain the endorsement, you must first pass the written knowledge test for Doubles/Triples. This test will cover topics such as coupling and uncoupling, inspecting double/triple trailers, and safe driving practices for operating a commercial motor vehicle with two or three trailers.
Once you have passed the written test, you can schedule a skills test with a certified CDL examiner. This skills test will evaluate your ability to operate a double/triple trailer combination safely and effectively.
If you successfully pass both tests, the CDL Doubles/Triples endorsement will be added to your existing CDL license. It's important to note that obtaining this endorsement requires additional training and practice beyond what is required for a standard Class A CDL license. Therefore, it's highly recommended that you receive additional training and practice before attempting to take the endorsement exams.
Yes, there are restrictions and limitations for drivers with a CDL Doubles/Triples endorsement in Alabama. These restrictions are in place to ensure the safety of the driver and other motorists on the road.
One of the main restrictions is that drivers with a Doubles/Triples endorsement can only operate double/triple trailer combinations that are legal in terms of weight and length limits. In Alabama, this means that the total weight of the vehicle and trailers cannot exceed 80,000 pounds, and the length of each trailer cannot exceed 28 feet.
Another restriction is that drivers with a Doubles/Triples endorsement must have a certain amount of experience operating commercial motor vehicles before they can operate double/triple trailers. In Alabama, you must have at least two years of experience operating a Class A vehicle before you can obtain a Doubles/Triples endorsement.
Additionally, drivers with a Doubles/Triples endorsement may be subject to more frequent inspections and audits by law enforcement agencies due to the increased complexity and risk associated with operating double/triple trailer combinations.
It's important for drivers with a Doubles/Triples endorsement to be aware of these restrictions and limitations, as violating them can result in fines, penalties, and even suspension or revocation of your CDL license.
One of the main restrictions is that drivers with a Doubles/Triples endorsement can only operate double/triple trailer combinations that are legal in terms of weight and length limits. In Alabama, this means that the total weight of the vehicle and trailers cannot exceed 80,000 pounds, and the length of each trailer cannot exceed 28 feet.
Another restriction is that drivers with a Doubles/Triples endorsement must have a certain amount of experience operating commercial motor vehicles before they can operate double/triple trailers. In Alabama, you must have at least two years of experience operating a Class A vehicle before you can obtain a Doubles/Triples endorsement.
Additionally, drivers with a Doubles/Triples endorsement may be subject to more frequent inspections and audits by law enforcement agencies due to the increased complexity and risk associated with operating double/triple trailer combinations.
It's important for drivers with a Doubles/Triples endorsement to be aware of these restrictions and limitations, as violating them can result in fines, penalties, and even suspension or revocation of your CDL license.
In Alabama, the maximum weight limit for a double/triple trailer combination with a CDL Doubles/Triples endorsement is 80,000 pounds. The length limit for each trailer is 28 feet.
It's important to note that these weight and length limits are subject to change and may vary depending on the state and the specific type of vehicle being operated. It's the responsibility of the driver to be aware of and comply with all applicable weight and length restrictions.
Additionally, drivers with a Doubles/Triples endorsement should be aware that operating a double/triple trailer combination requires additional training, skill, and experience beyond what is required for a standard Class A CDL license. It's important to receive proper training and practice before attempting to operate a double/triple trailer combination on public roads.
It's important to note that these weight and length limits are subject to change and may vary depending on the state and the specific type of vehicle being operated. It's the responsibility of the driver to be aware of and comply with all applicable weight and length restrictions.
Additionally, drivers with a Doubles/Triples endorsement should be aware that operating a double/triple trailer combination requires additional training, skill, and experience beyond what is required for a standard Class A CDL license. It's important to receive proper training and practice before attempting to operate a double/triple trailer combination on public roads.
Yes, there are specific safety considerations and regulations that drivers with a CDL Doubles/Triples endorsement need to follow when operating double/triple trailers in Alabama. These regulations are in place to ensure the safety of the driver, other motorists on the road, and the cargo being transported.
Some of the safety considerations and regulations for driving double/triple trailers with a CDL Doubles/Triples endorsement include:
1. Proper vehicle maintenance: It's important to ensure that all components of the vehicle, including brakes, tires, lights, and coupling devices, are properly maintained and functioning before operating a double/triple trailer combination.
2. Proper weight distribution: Ensuring that cargo is properly distributed and secured within the trailers can help prevent accidents caused by unbalanced weight.
3. Proper speed: Double/triple trailers require more time and distance to stop than single vehicles, so it's important to maintain a safe speed and avoid sudden stops or maneuvers.
4. Proper signaling: It's important to use proper signaling techniques, including hand signals and turn signals, when turning or changing lanes with a double/triple trailer combination.
5. Stopping distance: Drivers should maintain a safe following distance from other vehicles on the road to allow for greater stopping distance required by double/triple trailers.
6. Safe parking: Drivers should ensure that double/triple trailers are parked in a safe and secure location when not in use.
It's important for drivers with a CDL Doubles/Triples endorsement to be aware of these safety considerations and regulations to ensure safe operation of double/triple trailer combinations on public roads.
Some of the safety considerations and regulations for driving double/triple trailers with a CDL Doubles/Triples endorsement include:
1. Proper vehicle maintenance: It's important to ensure that all components of the vehicle, including brakes, tires, lights, and coupling devices, are properly maintained and functioning before operating a double/triple trailer combination.
2. Proper weight distribution: Ensuring that cargo is properly distributed and secured within the trailers can help prevent accidents caused by unbalanced weight.
3. Proper speed: Double/triple trailers require more time and distance to stop than single vehicles, so it's important to maintain a safe speed and avoid sudden stops or maneuvers.
4. Proper signaling: It's important to use proper signaling techniques, including hand signals and turn signals, when turning or changing lanes with a double/triple trailer combination.
5. Stopping distance: Drivers should maintain a safe following distance from other vehicles on the road to allow for greater stopping distance required by double/triple trailers.
6. Safe parking: Drivers should ensure that double/triple trailers are parked in a safe and secure location when not in use.
It's important for drivers with a CDL Doubles/Triples endorsement to be aware of these safety considerations and regulations to ensure safe operation of double/triple trailer combinations on public roads.
