Knowledge Test Class A
This license is required for driving any legal combination of vehicles, with a gross combination weight rating of 26,001 pounds or more, provided the GVWR of a trailer exceeds 10,000 pounds. To receive this license, applicants must pass a 50-question test. Test questions come from the Georgia Commercial Driver’s Manual. To pass, applicants must answer 40 questions correctly. Questions come from chapters covering: Introduction, Driving Safely, Transporting Cargo Safely, Air Brakes (if applicable), Combination Vehicles, Pre-Trip Vehicle Inspection Test, Basic Vehicle Control Skills Test and On-Road Driving. Endorsements that may be used with a Class A CDL are: Hazardous materials, Tank, Passenger, Doubles/Triples, HazMat, Tank, Air Brakes and School bus.
Number of Question
Passing Score
1. Before driving a vehicle with a dual air brake system, you must wait for the air compressor to build a minimum of ____ in both the primary and secondary systems.
Explanation
Before driving a vehicle with a dual air brake system, you should wait for the air compressor to build up at least 100 psi in both the primary and secondary systems.
2. The ____ tells a driver how much pressure is in the air tanks.
Explanation
A vehicle that is equipped with air brakes must also be equipped with a supply pressure gauge. This gauge tells the driver how much air pressure is in each of the vehicle's air tanks.
3. If you are being tailgated, you should:
Explanation
If someone is tailgating you, it is a good idea to open up the space ahead of your vehicle to make it easier for the driver to pass you. Increasing your speed is not a good idea because the driver may continue to tailgate you at the higher speed, only increasing the danger.
4. What is a tire load?
Explanation
Tire load is the maximum weight that a tire can safely carry at a specified pressure. This will be stated on the side of a tire.
5. While driving downhill, you should brake until you reach a speed that is ____ below your safe speed, then release the brake pedal.
Explanation
While driving downhill, you should hold down the brake pedal until your vehicle reaches a speed 5 mph below your safe speed, then release the brake pedal. Repeat this process.
6. Roads are most slippery right after it begins to rain because:
Explanation
Roads are particularly slippery when it first begins to rain. The water mixes with oil drippings on the road that have not yet washed away, creating a slippery and dangerous mixture.
7. If your truck or trailer catches fire, you should:
Explanation
If there is a fire in your vehicle, the first thing you need to do is leave the road and stop. Park in an open area away from anything that could catch fire, such as plants or other vehicles. Do not pull into a service station.
Ranked by best match
Frequently Asked Questions
A Class A CDL (Commercial Driver’s License) in Georgia allows an individual to operate a combination of vehicles with a weight of 26,001 pounds or more. This includes vehicles with a towed unit that weighs more than 10,000 pounds. Examples of vehicles that require a Class A CDL include tractor-trailers, truck and trailer combinations, and tanker vehicles.
To obtain a Class A CDL in Georgia, you must first obtain a commercial learner’s permit (CLP) and pass a skills test in a Class A vehicle. Additionally, you must pass the knowledge tests for both the general knowledge exam and the combination vehicles exam.
It is important to note that obtaining a Class A CDL in Georgia also requires meeting certain medical requirements and complying with federal and state regulations.
To obtain a Class A CDL in Georgia, you must first obtain a commercial learner’s permit (CLP) and pass a skills test in a Class A vehicle. Additionally, you must pass the knowledge tests for both the general knowledge exam and the combination vehicles exam.
It is important to note that obtaining a Class A CDL in Georgia also requires meeting certain medical requirements and complying with federal and state regulations.
With a Class A CDL license in Georgia, you can operate combination vehicles with a weight of 26,001 pounds or more. This includes vehicles with a towed unit that weighs more than 10,000 pounds. Examples of vehicles that require a Class A CDL include tractor-trailers, truck and trailer combinations, and tanker vehicles.
Some specific examples of vehicles you could operate with a Class A CDL in Georgia include:
- Tractor-trailers: These are vehicles with a front cab where the driver sits and controls the vehicle, and a trailer that is attached to the back of the cab. These can be used to transport goods over long distances.
- Double or triple trailers: These are combination vehicles that consist of two or three trailers connected to one another. They are commonly used in the transportation of goods across long distances.
- Tanker trucks: These are vehicles used to transport liquids or gases, such as oil or gasoline.
- Livestock carriers: These are vehicles designed to transport livestock, such as cattle or pigs.
It's important to note that there may be additional endorsements or restrictions required for certain types of vehicles or cargo.
Some specific examples of vehicles you could operate with a Class A CDL in Georgia include:
- Tractor-trailers: These are vehicles with a front cab where the driver sits and controls the vehicle, and a trailer that is attached to the back of the cab. These can be used to transport goods over long distances.
- Double or triple trailers: These are combination vehicles that consist of two or three trailers connected to one another. They are commonly used in the transportation of goods across long distances.
- Tanker trucks: These are vehicles used to transport liquids or gases, such as oil or gasoline.
- Livestock carriers: These are vehicles designed to transport livestock, such as cattle or pigs.
It's important to note that there may be additional endorsements or restrictions required for certain types of vehicles or cargo.
In order to obtain a Class A CDL license in Georgia, you must meet the following requirements:
1. Meet the age requirements: You must be at least 18 years old to obtain a Class A CDL license in Georgia. However, if you are going to transport hazardous materials or operate across state lines, you must be at least 21 years old.
2. Obtain a commercial learner's permit (CLP): Before you can obtain a Class A CDL license, you must first obtain a commercial learner's permit (CLP). To obtain a CLP, you must pass a written knowledge test for the general knowledge exam and any applicable endorsements (such as air brakes or hazardous materials).
3. Meet the medical requirements: You must pass a medical examination and obtain a medical certificate from a certified medical examiner.
4. Complete driver training: You are not required to complete driver training before obtaining a Class A CDL license in Georgia. However, it is highly recommended that you undergo training from an approved driving school or program.
5. Pass the skills test: To obtain your Class A CDL license, you must pass a skills test in a vehicle that falls under the Class A category. This test will include pre-trip inspection, basic vehicle control, and on-road driving.
6. Pay the necessary fees: There are fees associated with obtaining your CLP and your Class A CDL license in Georgia. The fees vary depending on the type of license and endorsements you are seeking.
It's important to note that there may be additional requirements or restrictions based on your specific situation or the type of cargo you will be transporting.
1. Meet the age requirements: You must be at least 18 years old to obtain a Class A CDL license in Georgia. However, if you are going to transport hazardous materials or operate across state lines, you must be at least 21 years old.
2. Obtain a commercial learner's permit (CLP): Before you can obtain a Class A CDL license, you must first obtain a commercial learner's permit (CLP). To obtain a CLP, you must pass a written knowledge test for the general knowledge exam and any applicable endorsements (such as air brakes or hazardous materials).
3. Meet the medical requirements: You must pass a medical examination and obtain a medical certificate from a certified medical examiner.
4. Complete driver training: You are not required to complete driver training before obtaining a Class A CDL license in Georgia. However, it is highly recommended that you undergo training from an approved driving school or program.
5. Pass the skills test: To obtain your Class A CDL license, you must pass a skills test in a vehicle that falls under the Class A category. This test will include pre-trip inspection, basic vehicle control, and on-road driving.
6. Pay the necessary fees: There are fees associated with obtaining your CLP and your Class A CDL license in Georgia. The fees vary depending on the type of license and endorsements you are seeking.
It's important to note that there may be additional requirements or restrictions based on your specific situation or the type of cargo you will be transporting.
The minimum age requirement to obtain a Class A CDL license in Georgia is 18 years old. However, drivers who are 18-20 years old will be restricted to operating commercial vehicles within the state of Georgia only. They are not allowed to operate commercial vehicles across state lines or transport hazardous materials.
If a driver is 21 years old or older, they may obtain a Class A CDL license without any age restrictions and may operate commercial vehicles across state lines and transport hazardous materials.
If a driver is 21 years old or older, they may obtain a Class A CDL license without any age restrictions and may operate commercial vehicles across state lines and transport hazardous materials.
Yes, you may need endorsements for a Class A CDL license depending on the type of vehicle you plan to operate or the cargo that you plan to transport. Here are some of the endorsements that you may need:
1. Combination Vehicle (required for all Class A CDL holders)
2. Double/Triple Trailer
3. Tanker
4. Hazardous Materials (HazMat)
5. Passenger
If you plan to operate a combination of vehicles with a total weight of 26,001 pounds or more, and the vehicle being towed has a weight of more than 10,000 pounds, you will be required to obtain the Combination Vehicle endorsement.
If you plan to transport hazardous materials, you will be required to obtain the HazMat endorsement in addition to passing a security threat assessment conducted by the Transportation Security Administration.
If you plan to transport passengers in a commercial vehicle, such as a bus, you will be required to obtain the Passenger endorsement.
It's important to note that each endorsement requires passing additional knowledge and skills tests beyond the general knowledge exam required for obtaining your Class A CDL license.
1. Combination Vehicle (required for all Class A CDL holders)
2. Double/Triple Trailer
3. Tanker
4. Hazardous Materials (HazMat)
5. Passenger
If you plan to operate a combination of vehicles with a total weight of 26,001 pounds or more, and the vehicle being towed has a weight of more than 10,000 pounds, you will be required to obtain the Combination Vehicle endorsement.
If you plan to transport hazardous materials, you will be required to obtain the HazMat endorsement in addition to passing a security threat assessment conducted by the Transportation Security Administration.
If you plan to transport passengers in a commercial vehicle, such as a bus, you will be required to obtain the Passenger endorsement.
It's important to note that each endorsement requires passing additional knowledge and skills tests beyond the general knowledge exam required for obtaining your Class A CDL license.
The Class A CDL skills test is a three-part test that consists of a pre-trip inspection, basic vehicle control, and a road test. Here is a breakdown of each part of the test:
1. Pre-Trip Inspection: The pre-trip inspection is designed to test your ability to check the vehicle to ensure that it is safe to operate. You will be asked to inspect the vehicle's basic systems, including the brakes, steering, suspension, tires, lights, and mirrors. You will need to explain to the examiner what you are checking and why.
2. Basic Vehicle Control: The basic vehicle control test is designed to test your ability to control the vehicle in tight spaces and at low speeds. You will be asked to perform maneuvers such as straight line backing, alley dock backing, and parallel parking.
3. Road Test: The road test is designed to evaluate your ability to safely operate the vehicle on public roads and highways. You will be asked to drive a predetermined route while demonstrating your ability to control the vehicle in traffic and obey traffic signals and signs.
It's important to note that each state may have specific requirements for the Class A CDL skills test, so be sure to check with your local DMV or licensing agency for details on what you need to know and practice before taking the exam.
1. Pre-Trip Inspection: The pre-trip inspection is designed to test your ability to check the vehicle to ensure that it is safe to operate. You will be asked to inspect the vehicle's basic systems, including the brakes, steering, suspension, tires, lights, and mirrors. You will need to explain to the examiner what you are checking and why.
2. Basic Vehicle Control: The basic vehicle control test is designed to test your ability to control the vehicle in tight spaces and at low speeds. You will be asked to perform maneuvers such as straight line backing, alley dock backing, and parallel parking.
3. Road Test: The road test is designed to evaluate your ability to safely operate the vehicle on public roads and highways. You will be asked to drive a predetermined route while demonstrating your ability to control the vehicle in traffic and obey traffic signals and signs.
It's important to note that each state may have specific requirements for the Class A CDL skills test, so be sure to check with your local DMV or licensing agency for details on what you need to know and practice before taking the exam.
Yes, there are some restrictions or limitations for drivers with a Class A CDL license. Here are some examples:
1. Age Restrictions: In most states, drivers must be at least 21 years old to operate a commercial vehicle across state lines or transport hazardous materials.
2. Endorsements: As mentioned earlier, a driver with a Class A CDL license may need additional endorsements to operate certain types of vehicles or transport certain types of cargo.
3. Training Requirements: Drivers with a Class A CDL license may be subject to additional training requirements, such as annual or biennial medical exams, periodic safety training, and drug and alcohol testing.
4. Vehicle Limitations: Some states may have vehicle weight limits or restrictions on the type of trailers that drivers with a Class A CDL can operate.
5. Hours of Service: Drivers with a Class A CDL license must adhere to federal and state hours-of-service regulations that limit the number of hours they can drive in a day and week.
It's important to note that restrictions and limitations vary by state, so be sure to check with your local DMV or licensing agency for specific rules and regulations in your area.
1. Age Restrictions: In most states, drivers must be at least 21 years old to operate a commercial vehicle across state lines or transport hazardous materials.
2. Endorsements: As mentioned earlier, a driver with a Class A CDL license may need additional endorsements to operate certain types of vehicles or transport certain types of cargo.
3. Training Requirements: Drivers with a Class A CDL license may be subject to additional training requirements, such as annual or biennial medical exams, periodic safety training, and drug and alcohol testing.
4. Vehicle Limitations: Some states may have vehicle weight limits or restrictions on the type of trailers that drivers with a Class A CDL can operate.
5. Hours of Service: Drivers with a Class A CDL license must adhere to federal and state hours-of-service regulations that limit the number of hours they can drive in a day and week.
It's important to note that restrictions and limitations vary by state, so be sure to check with your local DMV or licensing agency for specific rules and regulations in your area.
The rules and regulations for taking the Class A CDL written test in a language other than English can vary by state. However, in general, most states require that the test be taken in English. Some states may offer the test in other languages, but this is not always guaranteed.
If you are not fluent in English, it is important to check with your local DMV or licensing agency to see if any language assistance or translation services are available. Some states may allow you to bring an interpreter with you to translate the questions and answers for you. Other states may offer translations of the written test or allow you to take an audio version of the test.
It's important to note that even if you are allowed to take the written test in a language other than English, it is still important to learn and understand English for driving on US roads. Many road signs and communication with law enforcement will be in English, so being able to understand and communicate in English will be important for safe driving.
If you are not fluent in English, it is important to check with your local DMV or licensing agency to see if any language assistance or translation services are available. Some states may allow you to bring an interpreter with you to translate the questions and answers for you. Other states may offer translations of the written test or allow you to take an audio version of the test.
It's important to note that even if you are allowed to take the written test in a language other than English, it is still important to learn and understand English for driving on US roads. Many road signs and communication with law enforcement will be in English, so being able to understand and communicate in English will be important for safe driving.
Yes, you can request accommodations for the Class A CDL written test if you have a disability that impacts your ability to take the test under standard conditions. The Americans with Disabilities Act (ADA) requires that testing entities provide reasonable accommodations to individuals with disabilities to ensure that they have equal access to the testing process.
To request accommodations for the Class A CDL written test, you should contact your local DMV or licensing agency and provide documentation of your disability and how it impacts your ability to take the test. The documentation should come from a qualified professional, such as a doctor or psychologist, and should provide specific recommendations for accommodations that would be helpful for you.
Examples of accommodations that may be available include extended testing time, a separate testing room, a reader or scribe to assist with reading or writing, or specialized equipment such as a computer with assistive technology.
It is important to make your request for accommodations in advance of your scheduled testing date to allow time for the DMV or licensing agency to review your request and make necessary arrangements.
To request accommodations for the Class A CDL written test, you should contact your local DMV or licensing agency and provide documentation of your disability and how it impacts your ability to take the test. The documentation should come from a qualified professional, such as a doctor or psychologist, and should provide specific recommendations for accommodations that would be helpful for you.
Examples of accommodations that may be available include extended testing time, a separate testing room, a reader or scribe to assist with reading or writing, or specialized equipment such as a computer with assistive technology.
It is important to make your request for accommodations in advance of your scheduled testing date to allow time for the DMV or licensing agency to review your request and make necessary arrangements.
If you fail the Class A CDL written test, you will need to retake the test before you can obtain your commercial driver's license. The exact process for retaking the test can vary depending on the state, but in general, you will need to wait a designated amount of time before you can retake the test.
In most states, you will be required to pay a fee each time you take the written test. The fee may vary depending on the state and the number of times you have taken the test.
Before retaking the test, it is important to review and study the material covered on the test to improve your chances of passing. You may also want to consider taking a commercial driver training course to improve your knowledge and understanding of the rules and regulations.
It's important to note that there are limits on how many times you can take the written test. If you fail multiple times, you may be required to wait a certain amount of time or complete additional training before you can retake the test again. Check with your local DMV or licensing agency for specific guidelines and requirements for retaking the Class A CDL written test in your state.
In most states, you will be required to pay a fee each time you take the written test. The fee may vary depending on the state and the number of times you have taken the test.
Before retaking the test, it is important to review and study the material covered on the test to improve your chances of passing. You may also want to consider taking a commercial driver training course to improve your knowledge and understanding of the rules and regulations.
It's important to note that there are limits on how many times you can take the written test. If you fail multiple times, you may be required to wait a certain amount of time or complete additional training before you can retake the test again. Check with your local DMV or licensing agency for specific guidelines and requirements for retaking the Class A CDL written test in your state.
