Knowledge Test Class A
This license is required for driving any legal combination of vehicles, with a gross combination weight rating of 26,001 pounds or more, provided the GVWR of a trailer exceeds 10,000 pounds To receive this license, applicants must pass a 50-question test. To pass, applicants must answer 40 questions correctly. Each question has three possible answer choices. Test questions come from the Arizona Commercial Driver License Manual. Questions come from chapters covering: Introduction, Driving Safely, Transporting Cargo Safely, Air Brakes (if applicable), Combination, Doubles and Hazardous Materials. Endorsements that may be used with a Class A CDL are: Hazardous materials, Tank, Passenger, HazMat and Tank, Air Brakes and School bus.
15. Hanging meat as cargo is usually:
An operator should drive with care when transporting a cargo of hanging meat. Such a load is unstable, both because it has a high center of gravity and because the swinging of the meat can affect the driver's handling of the vehicle.
16. An example of required emergency equipment is:
All commercial motor vehicles are required to be equipped with the proper emergency equipment. This may include spare electrical fuses; three red reflective triangles, six fuses, or three liquid burning flares; and at least one properly charged and rated fire extinguisher.
17. Overloading a vehicle with cargo:
Overloading a vehicle can have negative effects on steering, braking, and speed control. Learn to recognize when cargo is overloaded or poorly balanced.
18. Which of the following is the best advice for driving in fog?
Driving in fog is always dangerous and should be avoided entirely if at all possible. If you must drive in fog, be sure to turn on your low beam headlights and fog lights, even during the daytime.
19. If a load is 40 feet long, it should be secured by at least ____ tie-downs.
Cargo should be restrained by at least one tie-down for every 10 feet of cargo. However, all cargo should have at least two tie-downs, no matter the size of the cargo.
20. When trying to put out an electrical fire, you should:
B:C fire extinguishers are designed to work on electrical fires and burning liquids. Don't pour water on an electrical fire.
21. Truck tractors with air brakes built on or after March 1, 1997 must have:
Truck tractors with air brakes built on or after March 1, 1997, and other vehicles with air brakes built on or after March 1, 1998, must be equipped with anti-lock brakes.
Ranked by best match
Frequently Asked Questions
Here are the steps to obtain a Class A CDL license in Arizona:
1. Obtain a commercial learner's permit (CLP) by passing the written knowledge test at a Motor Vehicle Division (MVD) office. To be eligible for a CLP, you must have a valid driver's license and pass a medical examination.
2. Hold the CLP for at least 14 days before scheduling and taking the skills test.
3. Schedule and take the pre-trip inspection, basic vehicle control, and on-road driving skills tests at an MVD-approved third-party testing facility.
4. Pass all three parts of the skills test to obtain your Class A CDL.
5. Pay the required fees and obtain your new license at an MVD office.
It is important to note that additional endorsements may be required depending on the type of cargo being transported, such as hazardous materials or passengers.
Additionally, you can operate vehicles designed to transport hazardous materials in amounts requiring placarding. This includes vehicles carrying large quantities of flammable or explosive materials.
It's important to note that some employers may have additional requirements or restrictions on the types of vehicles that you can operate with a Class A CDL license. Make sure to check with your employer or potential employers to ensure that you meet all their requirements.
1. Be at least 18 years of age to operate within Arizona or 21 years of age to operate interstate.
2. Hold a valid driver's license.
3. Pass a medical examination and obtain a medical certificate from a certified medical examiner.
4. Obtain a commercial learner's permit (CLP) by passing the written knowledge test at an Motor Vehicle Division (MVD) office.
5. Hold the CLP for at least 14 days before scheduling and taking the skills test.
6. Schedule and take the pre-trip inspection, basic vehicle control, and on-road driving skills tests at an MVD-approved third-party testing facility.
7. Pass all three parts of the skills test to obtain your Class A CDL.
8. Provide proof of residency in Arizona.
9. Pay the required fees for obtaining your CDL license.
It's important to note that additional endorsements may be required depending on the type of cargo being transported, such as hazardous materials or passengers.
1. Hazmat (H) endorsement: required if you plan to transport hazardous materials.
2. Tanker (N) endorsement: required if you plan to transport liquid or gaseous materials in a tank.
3. Doubles/Triples (T) endorsement: required if you plan to tow two or three trailers.
4. Passenger (P) endorsement: required if you plan to transport passengers in a commercial vehicle, such as a bus or shuttle.
To obtain an endorsement, you must pass a written knowledge test that covers the specific requirements for that endorsement. Some endorsements may also require additional skills tests or background checks. You can add endorsements to your Class A CDL license by taking the necessary tests at an Motor Vehicle Division (MVD) office or approved testing facility.
1. Pre-trip Inspection: This involves a thorough inspection of the vehicle to ensure it is safe to operate. You will be asked to identify and explain the function of various parts of the vehicle, such as brakes, steering, tires, lights, and more.
2. Basic Vehicle Control: This involves maneuvering the vehicle in a controlled setting, such as a closed course or parking lot. You will be asked to perform tasks such as straight-line backing, offset backing, and parallel parking.
3. On-Road Driving: This involves driving the vehicle on public roads while being evaluated by an examiner. You will be asked to demonstrate your ability to safely and effectively operate the vehicle in various situations, such as changing lanes, turning, merging onto highways, and more.
Each state has its own specific requirements for the Class A CDL skills test. In Arizona, you must pass all three parts of the test in order to obtain a Class A CDL license. The test is administered by an examiner from an approved testing facility or third-party tester.
1. Age Restrictions: In Arizona, you must be at least 18 years old to obtain a Class A CDL license. However, you cannot operate a commercial vehicle outside the state until you are at least 21 years old.
2. Endorsement Restrictions: As mentioned earlier, drivers may need additional endorsements to operate certain types of vehicles or cargo.
3. Medical Restrictions: Drivers must pass a medical examination every two years to ensure they are physically fit to operate a commercial vehicle.
4. Hours of Service Restrictions: Drivers must follow federal regulations regarding the number of hours they can drive and the amount of rest they must take between shifts.
5. Vehicle Restrictions: Some states may have restrictions on the type of vehicle or trailer that a driver with a Class A CDL license can operate.
It's important for drivers to be aware of these restrictions and limitations and to follow all state and federal regulations when operating a commercial vehicle. Failure to do so can result in fines, loss of license, or even criminal charges in some cases.
If you are not comfortable or proficient with the English language, it's important to seek assistance from a qualified translator or language instructor in order to prepare for the test. You may also want to consider taking an English language course to improve your skills.
Remember that passing the written test is a critical step in obtaining a Class A CDL license, so it's important to be well-prepared and confident when taking the test.
To request accommodations, you will need to contact your local Department of Motor Vehicles (DMV) or Motor Vehicle Division (MVD) and provide documentation of your disability from a qualified medical professional. The DMV or MVD will review your request and work with you to determine what accommodations are necessary to ensure that you can take the test under fair and appropriate conditions.
Examples of accommodations that may be provided include extended time to complete the test, a separate testing room, or assistive technology such as screen readers or magnification software.
It's important to note that accommodations are not guaranteed, and the DMV or MVD may deny your request if they believe that the requested accommodations would fundamentally alter the nature of the test or give you an unfair advantage over other test-takers. However, they will work with you to find appropriate accommodations whenever possible.
It's important to note that you are only allowed a certain number of attempts to pass the written test before you are required to wait a longer period of time before retaking it. In Arizona, you are allowed three attempts to pass the written test within a 12-month period. If you fail the test three times within this timeframe, you must wait at least six months before taking it again.
It's also important to prepare adequately for the written test before taking it for the first time. This means studying the Arizona Commercial Driver License Manual and taking practice tests to ensure that you understand the material and are familiar with the format of the test. The more prepared you are, the more likely you are to pass on your first attempt and avoid having to retake the test multiple times.