Knowledge Test Class A
This license is required for driving any legal combination of vehicles, with a gross combination weight rating of 26,001 pounds or more, provided the GVWR of a trailer exceeds 10,000 pounds To receive this license, applicants must pass a 50-question test. To pass, applicants must answer 40 questions correctly. Each question has three or four possible answer choices. Test questions come from the Arkansas Commercial Driver License Manual. Questions come from chapters covering: Introduction, Driving Safely, Transporting Cargo Safely, Air Brakes (if applicable), Combination, Doubles and Hazardous Materials. Endorsements that may be used with a Class A CDL are: Hazardous materials, Tank, Passenger, HazMat and Tank, Air Brakes and School bus.
Number of Question
Passing Score
43. If a person operates in both excepted and non-excepted intrastate commerce, which type of license should the driver select?
Explanation
To operate in both excepted intrastate commerce and non-excepted intrastate commerce, you must choose a non-excepted intrastate commerce license.
44. When approaching a construction worker who is near the road, you should:
Explanation
Always drive with caution through work zones. You should make a particular point of reducing your speed when workers are on or near the roadway.
45. On slippery roads, you should:
Explanation
On a slippery road, you must adjust your driving speed to fit conditions. Because it will take longer for your vehicle to stop on a slippery road than on a dry road, you should increase your following distance when conditions are slippery. Avoid driving in a way that requires you to change speeds frequently.
46. Bridges usually freeze:
Explanation
Bridges tend to freeze before other parts of the roadway. Be particularly careful on bridges when temperatures are close to the freezing point.
47. How is water and compressor oil removed from the bottom of an air storage tank?
Explanation
Water and compressor oil are removed from air storage tanks through a drain valve. The water and oil can damage the brakes if left to accumulate in the system. Manually operated tanks must be drained every day to remove this build-up.
48. If approaching a railroad crossing while driving a placarded vehicle, you should always:
Explanation
If approaching a railroad crossing while driving a transit bus, school bus, or placarded vehicle, special procedures apply. Before crossing, stop your vehicle within 50 feet of, but not less than 15 feet from, the nearest rail. Activate your four-way flashers while crossing. Do not stop, change gears, or change lanes while any part of your vehicle is proceeding across the tracks.
49. If one air system in a dual air brake system is very low on pressure:
Explanation
In a dual air brake system, if one of the air systems gets very low on pressure, either the front or rear brakes will not be operating fully. You should bring your vehicle to a safe stop and have the air system repaired.
50. What should you do if the braking system cannot build up hydraulic pressure?
Explanation
If your hydraulic braking system will not build up the pressure needed to slow or stop your vehicle, there are a few possible solutions. Try shifting into a lower gear, pumping the brakes, and/or using the emergency brake.
Ranked by best match
Frequently Asked Questions
A Class A CDL (Commercial Driver's License) license in Arkansas allows a driver to operate a combination of vehicles with a total weight of 26,001 pounds or more, provided the vehicle being towed weighs more than 10,000 pounds. This type of license is required for drivers who want to drive tractor-trailers, tanker vehicles, flatbeds, or other large vehicles.
The steps to obtaining a Class A CDL license in Arkansas include:
1. Obtain a commercial learner's permit (CLP) by passing the knowledge test for a Class A CDL. This permits the driver to practice driving with a qualified CDL holder in the vehicle.
2. Practice driving with a qualified CDL holder in the vehicle while holding the CLP for at least 14 days.
3. Schedule and pass a skills test at an approved testing location. The skills test consists of three parts: a pre-trip inspection, a basic control skills test, and an on-road driving test.
4. Once the skills test is passed, pay the required fees and obtain the Class A CDL from your local Arkansas revenue office.
It is important to note that additional endorsements may be required for specialized types of commercial driving, such as hazardous materials or passenger transport.
The steps to obtaining a Class A CDL license in Arkansas include:
1. Obtain a commercial learner's permit (CLP) by passing the knowledge test for a Class A CDL. This permits the driver to practice driving with a qualified CDL holder in the vehicle.
2. Practice driving with a qualified CDL holder in the vehicle while holding the CLP for at least 14 days.
3. Schedule and pass a skills test at an approved testing location. The skills test consists of three parts: a pre-trip inspection, a basic control skills test, and an on-road driving test.
4. Once the skills test is passed, pay the required fees and obtain the Class A CDL from your local Arkansas revenue office.
It is important to note that additional endorsements may be required for specialized types of commercial driving, such as hazardous materials or passenger transport.
With a Class A CDL license in Arkansas, you can operate a combination of vehicles, including:
1. Tractor-trailers - A combination of a tractor unit and one or more trailers.
2. Truck and trailer combinations - A combination of a truck and trailer.
3. Tank vehicles - Vehicles designed to transport liquids or gases, such as gasoline or propane.
4. Livestock carriers - Vehicles designed to transport live animals.
5. Flatbeds - Vehicles with a flat platform for carrying goods.
6. Double and triple trailers - Vehicles with two or three trailers attached to the tractor unit.
It's important to note that any vehicle combination with a gross vehicle weight rating (GVWR) of 26,001 pounds or more requires a Class A CDL license in Arkansas.
1. Tractor-trailers - A combination of a tractor unit and one or more trailers.
2. Truck and trailer combinations - A combination of a truck and trailer.
3. Tank vehicles - Vehicles designed to transport liquids or gases, such as gasoline or propane.
4. Livestock carriers - Vehicles designed to transport live animals.
5. Flatbeds - Vehicles with a flat platform for carrying goods.
6. Double and triple trailers - Vehicles with two or three trailers attached to the tractor unit.
It's important to note that any vehicle combination with a gross vehicle weight rating (GVWR) of 26,001 pounds or more requires a Class A CDL license in Arkansas.
To obtain a Class A CDL license in Arkansas, you must meet the following requirements:
1. Be at least 18 years of age to drive intrastate (within Arkansas) or 21 years of age to drive interstate (across state lines).
2. Have a valid Arkansas driver's license.
3. Pass a medical examination and obtain a medical certificate from a certified medical examiner.
4. Obtain a commercial learner's permit (CLP) by passing the knowledge test for a Class A CDL.
5. Hold the CLP for at least 14 days and practice driving with a qualified CDL holder in the vehicle.
6. Pass a skills test at an approved testing location, which includes a pre-trip inspection, basic control skills test, and an on-road driving test.
7. Pay the required fees and obtain the Class A CDL from your local Arkansas revenue office.
Additionally, you must not have any disqualifying criminal offenses and must disclose your driving record from any state where you previously held a driver's license.
1. Be at least 18 years of age to drive intrastate (within Arkansas) or 21 years of age to drive interstate (across state lines).
2. Have a valid Arkansas driver's license.
3. Pass a medical examination and obtain a medical certificate from a certified medical examiner.
4. Obtain a commercial learner's permit (CLP) by passing the knowledge test for a Class A CDL.
5. Hold the CLP for at least 14 days and practice driving with a qualified CDL holder in the vehicle.
6. Pass a skills test at an approved testing location, which includes a pre-trip inspection, basic control skills test, and an on-road driving test.
7. Pay the required fees and obtain the Class A CDL from your local Arkansas revenue office.
Additionally, you must not have any disqualifying criminal offenses and must disclose your driving record from any state where you previously held a driver's license.
In Arkansas, you must be at least 18 years old to obtain a Class A CDL license to drive intrastate (within Arkansas only). However, if you want to drive interstate (across state lines), you must be at least 21 years old to obtain a Class A CDL. Additionally, there may be other age-related requirements for certain endorsements or types of commercial driving, such as driving hazardous materials or operating passenger vehicles. It's important to check with the Arkansas Department of Finance and Administration or a qualified CDL training school to learn about any additional age requirements that may apply to your specific situation.
Yes, depending on the type of cargo you plan to transport or the type of vehicle you plan to operate, you may need additional endorsements on your Class A CDL license. Some of the most common endorsements include:
1. Hazmat (H) endorsement: Required to transport hazardous materials.
2. Tanker (N) endorsement: Required to operate a tank vehicle.
3. Double/Triple (T) endorsement: Required to pull double or triple trailers.
4. Passenger (P) endorsement: Required to transport passengers in a commercial vehicle, such as a bus or shuttle.
5. School Bus (S) endorsement: Required to drive a school bus.
6. Combination Tank/Hazmat (X) endorsement: Required to transport hazardous materials in a tank vehicle.
Endorsements require additional knowledge and skills tests beyond the initial Class A CDL test, and may also require additional background checks or other requirements. It's important to check with the Arkansas Department of Finance and Administration or a qualified CDL training school to determine which endorsements may be required for your specific commercial driving needs.
1. Hazmat (H) endorsement: Required to transport hazardous materials.
2. Tanker (N) endorsement: Required to operate a tank vehicle.
3. Double/Triple (T) endorsement: Required to pull double or triple trailers.
4. Passenger (P) endorsement: Required to transport passengers in a commercial vehicle, such as a bus or shuttle.
5. School Bus (S) endorsement: Required to drive a school bus.
6. Combination Tank/Hazmat (X) endorsement: Required to transport hazardous materials in a tank vehicle.
Endorsements require additional knowledge and skills tests beyond the initial Class A CDL test, and may also require additional background checks or other requirements. It's important to check with the Arkansas Department of Finance and Administration or a qualified CDL training school to determine which endorsements may be required for your specific commercial driving needs.
The Class A CDL skills test is designed to evaluate your ability to safely operate a commercial vehicle on the road. The test consists of three parts:
1. Pre-Trip Inspection: You will be required to perform a thorough inspection of your vehicle to ensure that it is safe and in good working condition. This includes checking all fluid levels, brakes, tires, lights, and other critical systems.
2. Basic Vehicle Control: You will be tested on your ability to control the vehicle in a variety of situations, such as backing up, turning, and parking. You may be asked to complete specific maneuvers, such as parallel parking or alley docking.
3. On-Road Driving: You will be evaluated on your ability to safely operate the vehicle on the road, including your ability to obey traffic laws and signals, merge and change lanes safely, and navigate various types of intersections and roadways.
The skills test is typically conducted by a certified examiner at an approved testing location. You must provide your own commercial vehicle for the test, which must meet certain requirements for size, weight, and other factors. It's important to thoroughly study the Arkansas CDL manual and practice your driving skills before taking the skills test.
1. Pre-Trip Inspection: You will be required to perform a thorough inspection of your vehicle to ensure that it is safe and in good working condition. This includes checking all fluid levels, brakes, tires, lights, and other critical systems.
2. Basic Vehicle Control: You will be tested on your ability to control the vehicle in a variety of situations, such as backing up, turning, and parking. You may be asked to complete specific maneuvers, such as parallel parking or alley docking.
3. On-Road Driving: You will be evaluated on your ability to safely operate the vehicle on the road, including your ability to obey traffic laws and signals, merge and change lanes safely, and navigate various types of intersections and roadways.
The skills test is typically conducted by a certified examiner at an approved testing location. You must provide your own commercial vehicle for the test, which must meet certain requirements for size, weight, and other factors. It's important to thoroughly study the Arkansas CDL manual and practice your driving skills before taking the skills test.
Yes, there are several restrictions and limitations that apply to drivers with a Class A CDL license in Arkansas. Some of the most common restrictions include:
1. Air Brake Restriction: If you did not pass the air brakes knowledge test or the skills test in a vehicle equipped with air brakes, you will be restricted from operating commercial vehicles with air brakes.
2. Manual Transmission Restriction: If you took the skills test in a vehicle with an automatic transmission, you will be restricted from operating commercial vehicles with a manual transmission.
3. Intrastate Only Restriction: If you only plan to operate commercial vehicles within the state of Arkansas, you may be restricted to intrastate driving only.
4. Medical Card Restriction: If you do not have a valid medical certificate on file with the Arkansas Department of Finance and Administration, you may be restricted from operating commercial vehicles.
5. Passenger Vehicle Restriction: If you did not pass the passenger endorsement knowledge and skills tests, you will be restricted from operating commercial vehicles designed to transport passengers.
It's important to understand the restrictions and limitations that apply to your Class A CDL license and ensure that you comply with all applicable rules and regulations. Violating these restrictions can result in fines, penalties, or even suspension or revocation of your CDL license.
1. Air Brake Restriction: If you did not pass the air brakes knowledge test or the skills test in a vehicle equipped with air brakes, you will be restricted from operating commercial vehicles with air brakes.
2. Manual Transmission Restriction: If you took the skills test in a vehicle with an automatic transmission, you will be restricted from operating commercial vehicles with a manual transmission.
3. Intrastate Only Restriction: If you only plan to operate commercial vehicles within the state of Arkansas, you may be restricted to intrastate driving only.
4. Medical Card Restriction: If you do not have a valid medical certificate on file with the Arkansas Department of Finance and Administration, you may be restricted from operating commercial vehicles.
5. Passenger Vehicle Restriction: If you did not pass the passenger endorsement knowledge and skills tests, you will be restricted from operating commercial vehicles designed to transport passengers.
It's important to understand the restrictions and limitations that apply to your Class A CDL license and ensure that you comply with all applicable rules and regulations. Violating these restrictions can result in fines, penalties, or even suspension or revocation of your CDL license.
No, the Arkansas State Police Commercial Driver License section requires all applicants to take the Class A CDL written test in English. This is because the CDL manual and all other related materials are only available in English. Additionally, all road signs and signals are also in English, so it is essential that drivers have a good understanding of the language to safely operate a commercial vehicle on the road.
However, if you have difficulty understanding English, you may bring an interpreter with you to the driver's license office to help you with the application process. The interpreter must be fluent in both English and your native language and must not have any personal interest in your application. The interpreter will be required to sign an affidavit stating that they will accurately translate all information and instructions provided during the application process.
It's important to note that even if you receive assistance from an interpreter during the application process, you will still be required to demonstrate your ability to read and understand English on the road test and during other parts of the CDL application process.
However, if you have difficulty understanding English, you may bring an interpreter with you to the driver's license office to help you with the application process. The interpreter must be fluent in both English and your native language and must not have any personal interest in your application. The interpreter will be required to sign an affidavit stating that they will accurately translate all information and instructions provided during the application process.
It's important to note that even if you receive assistance from an interpreter during the application process, you will still be required to demonstrate your ability to read and understand English on the road test and during other parts of the CDL application process.
Yes, if you fail the Class A CDL written test, you will be allowed to retake it. However, you will need to wait at least one business day before you can take the test again. You will also need to pay the testing fee again.
It's important to note that if you fail the written test three times, you will be required to wait at least 30 days before you can retake it. If you fail the test three times again, you will be required to wait at least 60 days before your next attempt. If you fail the test a total of six times, you will not be allowed to take it again for a period of one year.
To increase your chances of passing the Class A CDL written test, it's important to study the CDL manual thoroughly and take practice tests. You can find study materials and practice tests online or through your local DMV office. Additionally, consider enrolling in a CDL training program to receive additional instruction and practice opportunities.
It's important to note that if you fail the written test three times, you will be required to wait at least 30 days before you can retake it. If you fail the test three times again, you will be required to wait at least 60 days before your next attempt. If you fail the test a total of six times, you will not be allowed to take it again for a period of one year.
To increase your chances of passing the Class A CDL written test, it's important to study the CDL manual thoroughly and take practice tests. You can find study materials and practice tests online or through your local DMV office. Additionally, consider enrolling in a CDL training program to receive additional instruction and practice opportunities.
