Knowledge Test Class A
This license is required for driving any legal combination of vehicles, with a gross combination weight rating of 26,001 pounds or more, provided the GVWR of a trailer exceeds 10,000 pounds To receive this license, applicants must pass a 50-question test. To pass, applicants must answer 40 questions correctly. Each question has three or four possible answer choices. Test questions come from the Connecticut Commercial Driver License Manual. Questions come from chapters covering: Introduction, Driving Safely, Transporting Cargo Safely, Air Brakes (if applicable), Combination, Doubles and Hazardous Materials. Endorsements that may be used with a Class A CDL are: Hazardous materials, Tank, Passenger, HazMat and Tank, Air Brakes and School bus.
22. During a basic vehicle control skills test, a look is when:
A driver uses a look when they open their door, leave their seated position, and walk to the back of the vehicle to check its position. During the straight line backing exercise, a driver may not exceed one look. During any other exercise, a driver may not exceed two looks.
23. The controlled braking method is:
The method of controlled braking involves applying the brakes as hard as you can without locking the wheels. If you need to make large steering adjustments while using controlled braking, you should remove your foot from the brake pedal, steer, then reapply the brakes.
24. What must be done if a load is over-length?
Special equipment, such as warning flags or flashing lights, may be required if you are transporting an over-length load. When transporting such a a load, you will need to acquire the necessary permits. Driving is often limited to certain times.
25. If there are no warning gates or lights at a railroad crossing, you should:
A passive railroad crossing is a crossing that lacks control devices, like gates or warning lights. Before crossing a passive railroad crossing, you should search the tracks for approaching trains coming from either direction.
26. Cargo on flatbed trailers should be:
Cargo on flatbed trailers or trailers without sides must be tied down to prevent it from shifting or falling in transit.
27. When transporting cargo, you should:
Cargo and its securing devices must be inspected before starting a trip. After beginning a trip, the driver should check the load and securing devices within the first 50 miles on the road, every three hours or 150 miles traveled, and after every break.
28. To determine if a vehicle can handle a load, you must know:
It is a driver's responsibility to make sure their vehicle is not overloaded. They must be aware of legal weight limits and the maximum weight that their vehicle is rated to carry, including the weight capacity rating of the suspension system.
Ranked by best match
Frequently Asked Questions
To obtain a Class A CDL license in Connecticut, you must meet the following requirements:
1. Be at least 18 years old to drive within the state of Connecticut and 21 years old for interstate driving.
2. Hold a valid driver's license and have a clean driving record.
3. Pass a medical examination to ensure that you are physically qualified to operate a commercial vehicle.
4. Pass the written knowledge test and the road skills test.
Additionally, you may need to provide proof of citizenship or legal residency in the United States and pass a background check. You will also need to provide proof of insurance coverage for the vehicle you will be driving.
1. Tractor-trailers (also known as semi-trucks)
2. Tanker trucks
3. Livestock carriers
4. Flatbed trucks with oversize loads
5. Dump trucks with trailers
6. Double and triple trailers
7. Combination vehicles with three or more axles
It's important to note that each type of vehicle may require additional endorsements on your CDL license, such as the Hazmat endorsement for tanker trucks carrying hazardous materials. Make sure to check the specific requirements for the type of vehicle you will be operating before getting behind the wheel.
1. Be at least 18 years old to drive within the state of Connecticut and 21 years old for interstate driving.
2. Hold a valid driver's license and have a clean driving record.
3. Pass a medical examination to ensure that you are physically qualified to operate a commercial vehicle.
4. Obtain a Commercial Learner's Permit (CLP) by passing the written knowledge test for the type of vehicle you intend to operate, as well as any additional endorsements required for that vehicle type.
5. Complete a state-approved CDL training program or receive training from an employer, including behind-the-wheel instruction and observation time.
6. Pass the road skills test, which includes a pre-trip inspection, basic control skills test, and on-road driving test.
Additionally, you may need to provide proof of citizenship or legal residency in the United States and pass a background check. You will also need to provide proof of insurance coverage for the vehicle you will be driving.
1. T - Double/Triple Trailer: Required for drivers who plan to operate vehicles with two or three trailers attached.
2. P - Passenger: Required for drivers who plan to transport 16 or more passengers, including the driver.
3. N - Tank Vehicle: Required for drivers who plan to transport liquids or gases in tank vehicles.
4. H - Hazardous Materials: Required for drivers who plan to transport hazardous materials that require placards.
To obtain these endorsements, you will need to pass additional written knowledge tests specific to each endorsement and, in some cases, complete additional training and/or pass a skills test. It's important to note that some endorsements may also have additional age requirements or background check requirements.
1. Pre-Trip Inspection: You will be required to perform a pre-trip inspection of your vehicle and explain to the examiner what you are checking and why. This will include checking items such as the brakes, tires, lights, and coupling devices.
2. Basic Vehicle Control: You will be tested on your ability to control your vehicle in a controlled environment, such as a driving range. This will include exercises such as straight line backing, offset backing, and parallel parking.
3. On-Road Driving: You will be tested on your ability to safely operate the vehicle on public roads. This portion of the test will include a variety of driving situations such as turns, lane changes, and railroad crossings.
In order to pass the skills test, you must successfully complete all three parts of the exam. It's important to note that the skills test must be taken in a vehicle that is representative of the type of vehicle you plan to operate with your Class A CDL license. Additionally, you must have a valid medical certificate and pass all required written knowledge tests before taking the skills test.
1. Air Brake Restriction: If you take the CDL skills test in a vehicle that is not equipped with air brakes, you will receive an air brake restriction on your license. This means you are not authorized to operate vehicles with air brakes.
2. L - No Air Brake: If you take the CDL skills test in a vehicle that is equipped with air brakes, but you do not pass the air brake knowledge test or perform the air brake check during the skills test correctly, you will receive an L restriction on your license. This means that you are not authorized to operate vehicles with air brakes.
3. E - No Manual Transmission: If you take the CDL skills test in a vehicle with an automatic transmission, you will receive an E restriction on your license. This means that you are not authorized to operate vehicles with a manual transmission.
4. Intrastate Only: If you do not meet federal medical requirements or are under 21 years old, you may be restricted to driving only within Connecticut (intrastate) and not allowed to drive across state lines (interstate).
It's important to note that restrictions and limitations may vary depending on individual circumstances and state laws. It's always best to check with your state's Department of Motor Vehicles or licensing agency for specific information about CDL restrictions and limitations.
However, if you have difficulty reading or understanding English, you may be able to receive language assistance during the written test. You can contact the Connecticut Department of Motor Vehicles (DMV) for information on available language assistance services. Additionally, some DMV offices may have interpreters available to assist with translation during the test. It's important to contact the DMV in advance to arrange for any necessary language assistance services.
To request accommodations for the CDL written test, you will need to fill out a Request for Accommodations form, which is available on the DMV website or at any DMV office. You will need to provide documentation of your disability and the specific accommodations you are requesting.
The DMV will review your request and may ask for additional information or documentation if needed. Accommodations that may be available include extended testing time, a separate testing room, a reader or interpreter, or assistive technology.
It's important to note that the DMV may require advance notice of your accommodation request in order to arrange for appropriate accommodations and staff. Therefore, it's recommended that you submit your request as soon as possible before your scheduled test date.
If you have any questions or concerns about requesting accommodations for the CDL written test, you can contact the Connecticut DMV directly for assistance.
You will also need to pay the testing fee again before you can retake the test. The current fee for the Class A CDL written test in Connecticut is $40.
It's important to note that there is a limit to how many times you can take the test in a certain period of time. In Connecticut, you are allowed three attempts to pass the written test within a 90-day period. After three failed attempts, you will need to wait six months before you can take the test again.
If you continue to have difficulty passing the written test, it may be helpful to seek additional training or study resources, such as a CDL study guide or practice tests. Additionally, some truck driving schools offer training specifically designed to help students pass the CDL written and practical tests.