Tank
This endorsement is required to haul any liquid or gaseous materials in a tank or tanks having a capacity of 1,000 gallons or more that is either permanently or temporarily attached to the vehicle or chassis. To receive this endorsement, applicants must pass a test. The test consists of 20 multiple choice questions. Each question has three possible answer choices. To pass, the applicant must answer at least 16 questions correctly. Test questions come from the Idaho Commercial Driver’s License Manual. Questions come from chapters covering: Driving Safely, Tank Vehicles, Hazardous Materials and Combination Vehicles. The Tank endorsement can be used with the Class A, B or C CDL.
Number of Question
Passing Score
15. How can a driver maintain alertness while driving?
Explanation
Eating heavy foods before driving or keeping the temperature in a cab too high can cause a driver to become drowsy while behind the wheel. Exercising and maintaining a healthy diet will help a driver to stay alert while driving.
16. If confronted by an aggressive driver, you should:
Explanation
If confronted by an aggressive driver, don't let yourself be provoked by their actions or angry gestures. Do not risk provoking the other driver by making eye contact. Get out of their way if you can do so safely.
17. If driving so slowly that you could impede the flow of traffic, you should:
Explanation
If you must drive so slowly that you will impede the flow of traffic, you should turn on your four-way flashers to alert drivers behind you (as long as local laws allow the use of flashers).
18. When accelerating on a surface with poor traction, such as a wet road, a driver should:
Explanation
You should accelerate very gradually when driving under conditions that create poor traction.
19. Before driving a power steering-equipped vehicle, you should make sure that:
Explanation
When inspecting a vehicle that is equipped with power steering, check the hoses, pumps, and fluid level. In particular, you should look for leaks in the hoses.
20. If a tank is found to be leaking, the driver should:
Explanation
Transporting liquids or gases in a leaking tank is both unsafe and against the law.
Ranked by best match
Frequently Asked Questions
To obtain a CDL Tank endorsement in Idaho, follow these steps:
1. Obtain a valid Idaho Commercial Driver's License (CDL).
Before you can apply for a Tank endorsement, you must hold a valid Idaho Commercial Driver's License (CDL).
2. Meet the eligibility requirements.
To qualify for a Tank endorsement, you must have a CDL and pass the Tanker endorsement knowledge test.
3. Study for the Tanker endorsement knowledge test.
You can prepare for the Tanker endorsement knowledge test by reviewing the Idaho CDL Manual and taking practice tests.
4. Schedule an appointment to take the Tanker endorsement knowledge test.
You can schedule an appointment to take the Tanker endorsement knowledge test by contacting your local Idaho Department of Transportation (IDOT) office.
5. Pass the Tanker endorsement knowledge test.
The Tanker endorsement knowledge test is a written exam that covers topics such as tanker truck safety, loading and unloading procedures, and hazardous materials.
6. Complete any additional requirements.
Depending on your situation, you may need to complete additional requirements such as a background check or a driving skills test.
7. Pay the fee.
The fee for a Tanker endorsement in Idaho is $15.
Once you have completed all of these steps, you will receive your CDL with the Tanker endorsement.
1. Obtain a valid Idaho Commercial Driver's License (CDL).
Before you can apply for a Tank endorsement, you must hold a valid Idaho Commercial Driver's License (CDL).
2. Meet the eligibility requirements.
To qualify for a Tank endorsement, you must have a CDL and pass the Tanker endorsement knowledge test.
3. Study for the Tanker endorsement knowledge test.
You can prepare for the Tanker endorsement knowledge test by reviewing the Idaho CDL Manual and taking practice tests.
4. Schedule an appointment to take the Tanker endorsement knowledge test.
You can schedule an appointment to take the Tanker endorsement knowledge test by contacting your local Idaho Department of Transportation (IDOT) office.
5. Pass the Tanker endorsement knowledge test.
The Tanker endorsement knowledge test is a written exam that covers topics such as tanker truck safety, loading and unloading procedures, and hazardous materials.
6. Complete any additional requirements.
Depending on your situation, you may need to complete additional requirements such as a background check or a driving skills test.
7. Pay the fee.
The fee for a Tanker endorsement in Idaho is $15.
Once you have completed all of these steps, you will receive your CDL with the Tanker endorsement.
To obtain a CDL Tank license in Idaho, you must meet the following requirements:
1. Be at least 21 years old.
To operate a commercial vehicle carrying hazardous materials, including tanks, you must be at least 21 years old in Idaho.
2. Hold a valid Idaho commercial driver's license (CDL).
Before you can apply for a Tank endorsement, you must hold a valid Idaho commercial driver's license (CDL).
3. Pass the Tank vehicle endorsement knowledge test.
You must pass the Tank vehicle endorsement knowledge test to be eligible for a CDL with a Tank endorsement.
4. Provide proof of citizenship or lawful permanent residency.
You must show proof of citizenship or lawful permanent residency to obtain a CDL with a Tank endorsement.
5. Meet medical qualifications.
You must meet medical qualifications to ensure that you are physically capable of operating a commercial vehicle carrying hazardous materials.
6. Pass a background check.
You may be required to pass a background check to obtain a CDL with a Tank endorsement.
7. Complete any required training.
Depending on your situation and the type of tank vehicle you plan to operate, you may need to complete additional training before receiving your CDL with a Tank endorsement.
It's important to note that the requirements for obtaining a CDL with a Tank endorsement may vary depending on your state or the type of tank vehicle you plan to operate. Be sure to check with your local Department of Transportation for specific requirements and regulations in your area.
1. Be at least 21 years old.
To operate a commercial vehicle carrying hazardous materials, including tanks, you must be at least 21 years old in Idaho.
2. Hold a valid Idaho commercial driver's license (CDL).
Before you can apply for a Tank endorsement, you must hold a valid Idaho commercial driver's license (CDL).
3. Pass the Tank vehicle endorsement knowledge test.
You must pass the Tank vehicle endorsement knowledge test to be eligible for a CDL with a Tank endorsement.
4. Provide proof of citizenship or lawful permanent residency.
You must show proof of citizenship or lawful permanent residency to obtain a CDL with a Tank endorsement.
5. Meet medical qualifications.
You must meet medical qualifications to ensure that you are physically capable of operating a commercial vehicle carrying hazardous materials.
6. Pass a background check.
You may be required to pass a background check to obtain a CDL with a Tank endorsement.
7. Complete any required training.
Depending on your situation and the type of tank vehicle you plan to operate, you may need to complete additional training before receiving your CDL with a Tank endorsement.
It's important to note that the requirements for obtaining a CDL with a Tank endorsement may vary depending on your state or the type of tank vehicle you plan to operate. Be sure to check with your local Department of Transportation for specific requirements and regulations in your area.
Yes, you may need specific training or experience to obtain a CDL Tank endorsement in Idaho.
The Federal Motor Carrier Safety Administration (FMCSA) requires that drivers who transport hazardous materials, including those in tanks, complete specialized training. This training must cover areas such as loading and unloading procedures, emergency response, and hazmat regulations.
In addition to the FMCSA training requirements, Idaho may have specific training requirements for Tank endorsement holders. It is recommended to check with your local Department of Transportation or a reputable CDL training school in Idaho to determine what specific training is required.
Furthermore, it is important to note that some employers may require additional training or experience before hiring drivers with a Tank endorsement. It is always a good idea to research the specific requirements of any potential employers before pursuing a CDL Tank endorsement.
The Federal Motor Carrier Safety Administration (FMCSA) requires that drivers who transport hazardous materials, including those in tanks, complete specialized training. This training must cover areas such as loading and unloading procedures, emergency response, and hazmat regulations.
In addition to the FMCSA training requirements, Idaho may have specific training requirements for Tank endorsement holders. It is recommended to check with your local Department of Transportation or a reputable CDL training school in Idaho to determine what specific training is required.
Furthermore, it is important to note that some employers may require additional training or experience before hiring drivers with a Tank endorsement. It is always a good idea to research the specific requirements of any potential employers before pursuing a CDL Tank endorsement.
Yes, there is an additional written test you must pass to obtain a CDL Tank endorsement in Idaho. The Tank Vehicle endorsement test covers specific knowledge related to the safe operation of tank vehicles, such as:
1. Tank vehicle inspection and maintenance
2. Loading and unloading procedures
3. Handling and transporting hazardous materials
4. Emergency response procedures
The Tank Vehicle endorsement test will assess your knowledge of these areas to ensure that you can safely operate a tank vehicle on the road.
It's important to note that the Tank Vehicle endorsement test is in addition to the other written tests required for a CDL, such as the General Knowledge Test and any required endorsements for specific types of vehicles (e.g., Doubles/Triples, Hazmat). You must pass all required tests to obtain a CDL with a Tank endorsement.
It is recommended that you study the Idaho CDL Driver's Manual and take practice tests before taking the Tank Vehicle endorsement test to ensure that you are prepared for the exam.
1. Tank vehicle inspection and maintenance
2. Loading and unloading procedures
3. Handling and transporting hazardous materials
4. Emergency response procedures
The Tank Vehicle endorsement test will assess your knowledge of these areas to ensure that you can safely operate a tank vehicle on the road.
It's important to note that the Tank Vehicle endorsement test is in addition to the other written tests required for a CDL, such as the General Knowledge Test and any required endorsements for specific types of vehicles (e.g., Doubles/Triples, Hazmat). You must pass all required tests to obtain a CDL with a Tank endorsement.
It is recommended that you study the Idaho CDL Driver's Manual and take practice tests before taking the Tank Vehicle endorsement test to ensure that you are prepared for the exam.
The CDL Tank endorsement written test covers specific topics related to the safe operation of tank vehicles. Here are the main areas that are covered in the test:
1. Inspection and maintenance of tank vehicles: This section covers the inspection and maintenance of tank vehicles, including checking for leaks, cracks, and other potential hazards.
2. Loading and unloading procedures: This section covers the proper procedures for loading and unloading tank vehicles, including handling hazardous materials.
3. Safe driving practices: This section covers safe driving practices when operating a tank vehicle, including speed management, braking, and turning.
4. Emergency response procedures: This section covers emergency response procedures in case of an accident or spill involving a tank vehicle.
5. Hazardous materials regulations: This section covers federal regulations related to hazardous materials transportation, including labeling requirements and placarding.
It is important to study these topics thoroughly before taking the written test for a CDL Tank endorsement. You can find more information on these topics in the Idaho CDL Driver's Manual or through a reputable CDL training school in Idaho.
1. Inspection and maintenance of tank vehicles: This section covers the inspection and maintenance of tank vehicles, including checking for leaks, cracks, and other potential hazards.
2. Loading and unloading procedures: This section covers the proper procedures for loading and unloading tank vehicles, including handling hazardous materials.
3. Safe driving practices: This section covers safe driving practices when operating a tank vehicle, including speed management, braking, and turning.
4. Emergency response procedures: This section covers emergency response procedures in case of an accident or spill involving a tank vehicle.
5. Hazardous materials regulations: This section covers federal regulations related to hazardous materials transportation, including labeling requirements and placarding.
It is important to study these topics thoroughly before taking the written test for a CDL Tank endorsement. You can find more information on these topics in the Idaho CDL Driver's Manual or through a reputable CDL training school in Idaho.
No, there are no specific skills or maneuvers that you need to demonstrate during the CDL Tank endorsement written test. The test is strictly a written exam that assesses your knowledge of the safe operation of tank vehicles.
However, if you are seeking to obtain a Tank endorsement on your CDL, you may be required to take a skills test in addition to the written test. The skills test will assess your ability to safely operate a tank vehicle on the road.
During the Tank endorsement skills test, you may be asked to demonstrate the following maneuvers:
1. Pre-trip inspection: You will be asked to inspect your tank vehicle to ensure that it is safe and in good working condition.
2. Basic control skills: You may be asked to demonstrate basic control skills, such as backing up and turning.
3. On-road driving: You will be asked to drive your tank vehicle on public roads while demonstrating safe driving practices and handling procedures specific to tank vehicles.
It is important to note that the specific requirements for the Tank endorsement skills test may vary depending on the state in which you are obtaining your CDL. It is recommended that you check with your local DMV or CDL training school for more information on the requirements for obtaining a Tank endorsement in your state.
However, if you are seeking to obtain a Tank endorsement on your CDL, you may be required to take a skills test in addition to the written test. The skills test will assess your ability to safely operate a tank vehicle on the road.
During the Tank endorsement skills test, you may be asked to demonstrate the following maneuvers:
1. Pre-trip inspection: You will be asked to inspect your tank vehicle to ensure that it is safe and in good working condition.
2. Basic control skills: You may be asked to demonstrate basic control skills, such as backing up and turning.
3. On-road driving: You will be asked to drive your tank vehicle on public roads while demonstrating safe driving practices and handling procedures specific to tank vehicles.
It is important to note that the specific requirements for the Tank endorsement skills test may vary depending on the state in which you are obtaining your CDL. It is recommended that you check with your local DMV or CDL training school for more information on the requirements for obtaining a Tank endorsement in your state.
Yes, there are some restrictions and limitations for drivers with a CDL Tank endorsement. Here are a few examples:
1. Endorsement-specific restrictions: In some cases, drivers with a Tank endorsement may be restricted to certain types or sizes of tank vehicles. For example, a driver may be authorized to transport liquid cargo but not gas cargo.
2. Hazardous materials restrictions: Drivers with a Tank endorsement are authorized to transport hazardous materials, but there may be restrictions on the types of materials they can transport. Drivers must also comply with federal regulations related to the transportation of hazardous materials.
3. Training requirements: Drivers with a Tank endorsement must undergo specialized training related to the safe operation of tank vehicles and the transportation of hazardous materials.
4. Endorsement renewal requirements: Like all CDL endorsements, the Tank endorsement must be renewed periodically. Drivers may be required to undergo additional training or testing in order to renew their endorsement.
It is important for drivers with a CDL Tank endorsement to be aware of these restrictions and limitations and to comply with all relevant regulations. Failure to do so could result in fines, penalties, or even the suspension or revocation of their CDL.
1. Endorsement-specific restrictions: In some cases, drivers with a Tank endorsement may be restricted to certain types or sizes of tank vehicles. For example, a driver may be authorized to transport liquid cargo but not gas cargo.
2. Hazardous materials restrictions: Drivers with a Tank endorsement are authorized to transport hazardous materials, but there may be restrictions on the types of materials they can transport. Drivers must also comply with federal regulations related to the transportation of hazardous materials.
3. Training requirements: Drivers with a Tank endorsement must undergo specialized training related to the safe operation of tank vehicles and the transportation of hazardous materials.
4. Endorsement renewal requirements: Like all CDL endorsements, the Tank endorsement must be renewed periodically. Drivers may be required to undergo additional training or testing in order to renew their endorsement.
It is important for drivers with a CDL Tank endorsement to be aware of these restrictions and limitations and to comply with all relevant regulations. Failure to do so could result in fines, penalties, or even the suspension or revocation of their CDL.
No, you cannot transport liquid or gas materials without a CDL Tank endorsement if the vehicle you are operating requires a Tank endorsement. According to federal regulations, you need a Tank endorsement on your CDL to operate any commercial motor vehicle that is designed to transport liquid or gas materials in bulk in a tank or tanks with an individual rated capacity of more than 119 gallons and an aggregate rated capacity of 1,000 gallons or more.
In addition to the Tank endorsement, you may also need to obtain a Hazardous Materials (HazMat) endorsement on your CDL to transport certain types of hazardous materials. Operating a tank vehicle without the required endorsements can result in fines, penalties, and the suspension or revocation of your CDL.
It's important to note that the specific regulations related to tank vehicles and hazardous materials can vary by state. It's recommended that you check with your local DMV or CDL training school for more information on the requirements for transporting liquid or gas materials in your state.
In addition to the Tank endorsement, you may also need to obtain a Hazardous Materials (HazMat) endorsement on your CDL to transport certain types of hazardous materials. Operating a tank vehicle without the required endorsements can result in fines, penalties, and the suspension or revocation of your CDL.
It's important to note that the specific regulations related to tank vehicles and hazardous materials can vary by state. It's recommended that you check with your local DMV or CDL training school for more information on the requirements for transporting liquid or gas materials in your state.
You can add the CDL Tank endorsement to your existing CDL license. To add the Tank endorsement, you will need to apply for it through your state's Department of Motor Vehicles (DMV) or licensing agency.
The specific process for adding the Tank endorsement to your CDL may vary by state, but generally, it will involve the following steps:
1. Study for the Tank endorsement exam: You will need to study the material related to tank vehicles and the transportation of liquid or gas materials. Your state's DMV may provide study materials or training programs to help you prepare for the exam.
2. Schedule and take the Tank endorsement exam: Once you feel prepared, you can schedule a time to take the Tank endorsement exam at your local DMV or approved testing location. The exam will test your knowledge of tank vehicle safety, load securement, and other related topics.
3. Pay any required fees: There may be fees associated with adding the Tank endorsement to your CDL. You will need to pay these fees when you apply.
4. Receive your new CDL license: Once you have passed the Tank endorsement exam and paid any required fees, you will be issued a new CDL license with the Tank endorsement added.
It's important to note that adding a new endorsement to your CDL may affect your driving record and insurance rates, so be sure to check with your insurance provider before making any changes to your license.
The specific process for adding the Tank endorsement to your CDL may vary by state, but generally, it will involve the following steps:
1. Study for the Tank endorsement exam: You will need to study the material related to tank vehicles and the transportation of liquid or gas materials. Your state's DMV may provide study materials or training programs to help you prepare for the exam.
2. Schedule and take the Tank endorsement exam: Once you feel prepared, you can schedule a time to take the Tank endorsement exam at your local DMV or approved testing location. The exam will test your knowledge of tank vehicle safety, load securement, and other related topics.
3. Pay any required fees: There may be fees associated with adding the Tank endorsement to your CDL. You will need to pay these fees when you apply.
4. Receive your new CDL license: Once you have passed the Tank endorsement exam and paid any required fees, you will be issued a new CDL license with the Tank endorsement added.
It's important to note that adding a new endorsement to your CDL may affect your driving record and insurance rates, so be sure to check with your insurance provider before making any changes to your license.
Yes, there are specific requirements and regulations for handling hazardous materials with a CDL Tank endorsement. The Federal Motor Carrier Safety Administration (FMCSA) has established regulations that govern the transportation of hazardous materials in tank vehicles, and these regulations apply to drivers with a Tank endorsement on their CDL.
Here are some of the key requirements and regulations for handling hazardous materials with a CDL Tank endorsement:
1. Training: Drivers who transport hazardous materials in tank vehicles must receive specialized training on the safe handling and transportation of these materials. The training must cover topics such as the properties of hazardous materials, proper loading and unloading procedures, emergency response, and more.
2. Marking and labeling: Tank vehicles that transport hazardous materials must be properly marked and labeled to indicate the type of material being transported, as well as any hazards associated with it.
3. Loading and unloading procedures: Tank vehicles must be loaded and unloaded in a safe manner that minimizes the risk of spills or leaks. Drivers must follow established procedures for securing the load and ensuring that the tank is properly vented.
4. Emergency response: In the event of an accident or spill involving hazardous materials, drivers with a Tank endorsement must follow established emergency response procedures and take appropriate action to protect themselves and others.
5. Recordkeeping: Drivers who transport hazardous materials in tank vehicles must maintain detailed records of their activities, including information on the type and quantity of material transported, loading and unloading procedures, emergency response actions taken, and more.
It's important to note that these requirements may vary depending on the type of hazardous material being transported, as well as other factors such as the size of the tank vehicle and the route being traveled. Drivers with a Tank endorsement should be familiar with all applicable regulations related to the transportation of hazardous materials.
Here are some of the key requirements and regulations for handling hazardous materials with a CDL Tank endorsement:
1. Training: Drivers who transport hazardous materials in tank vehicles must receive specialized training on the safe handling and transportation of these materials. The training must cover topics such as the properties of hazardous materials, proper loading and unloading procedures, emergency response, and more.
2. Marking and labeling: Tank vehicles that transport hazardous materials must be properly marked and labeled to indicate the type of material being transported, as well as any hazards associated with it.
3. Loading and unloading procedures: Tank vehicles must be loaded and unloaded in a safe manner that minimizes the risk of spills or leaks. Drivers must follow established procedures for securing the load and ensuring that the tank is properly vented.
4. Emergency response: In the event of an accident or spill involving hazardous materials, drivers with a Tank endorsement must follow established emergency response procedures and take appropriate action to protect themselves and others.
5. Recordkeeping: Drivers who transport hazardous materials in tank vehicles must maintain detailed records of their activities, including information on the type and quantity of material transported, loading and unloading procedures, emergency response actions taken, and more.
It's important to note that these requirements may vary depending on the type of hazardous material being transported, as well as other factors such as the size of the tank vehicle and the route being traveled. Drivers with a Tank endorsement should be familiar with all applicable regulations related to the transportation of hazardous materials.
