Knowledge Test Class A
This license is required for driving any legal combination of vehicles, with a gross combination weight rating of 26,001 pounds or more, provided the GVWR of a trailer exceeds 10,000 pounds To receive this license, applicants must pass a 50-question test. To pass, applicants must answer 40 questions correctly. Each question has four possible answer choices. Test questions come from the New Hampshire CDL Driver’s Guide. Questions come from chapters covering: Introduction, Driving Safely, Transporting Cargo Safely, Air Brakes (if applicable), Combination, Doubles and Hazardous Materials. Endorsements that may be used with a Class A CDL are: Hazardous materials, Tank, Passenger, HazMat and Tank, Air Brakes and School bus.
Number of Question
Passing Score
15. Eating while driving is:
Explanation
Smoking, eating, or drinking are distracting activities and should be avoided while you are driving. Instead, plan ahead and allow yourself time to stop to eat when making a lengthy trip.
16. Hydroplaning:
Explanation
Hydroplaning is an effect in which a vehicle's tires lose traction with the surface of the road and instead glide along a layer of water. There does not have to be a large amount of water on the road for this to occur.
17. In a vehicle with dual parking control valves, once air pressure is lost and the spring brakes come on:
Explanation
In a vehicle with dual parking control valves, there is a separate air tank that can be used to temporarily release the spring brakes if they have been activated due to low air pressure. Pushing in the proper control will release the spring brakes for a short period of time, allowing the driver to move the vehicle in an emergency.
18. A broken exhaust system:
Explanation
A broken exhaust system can let poisonous fumes into a vehicle's cab or sleeper berth. Be sure to inspect your exhaust system for any loose, broken, or missing parts.
19. What is the number one cause of death and injury in a work zone?
Explanation
Speeding is the leading cause of death and injury in work zones. Use extra caution when driving near workers in a work zone.
20. To avoid a hazard, you:
Explanation
Stopping is not always the best way to avoid a hazard. If there is not enough space for you to stop to avoid coming into contact with the hazard, swerving out of the way may be your safest option.
21. Without the proper amount of oil in its engine:
Explanation
It is essential that a vehicle's engine have adequate oil pressure. An engine can be destroyed rapidly if it is run without oil.
Ranked by best match
Frequently Asked Questions
A Class A CDL license in New Hampshire is a commercial driver's license that allows the holder to operate a combination of vehicles with a total weight of 26,001 pounds or more, provided that the vehicle being towed weighs more than 10,000 pounds. This license also allows the holder to operate any vehicle in Class B or C.
Step-by-step process to obtain a Class A CDL license in New Hampshire:
1. Obtain a Commercial Driver's License (CDL) Manual from the Department of Motor Vehicles (DMV) website or any DMV office.
2. Meet the eligibility requirements, including being at least 18 years old, holding a valid driver's license, and passing a medical examination.
3. Obtain a Commercial Learner's Permit (CLP) by passing a written knowledge test and a vision test.
4. Hold the CLP for at least 14 days before taking the skills test.
5. Schedule and pass a skills test, which includes a pre-trip inspection, basic vehicle control, and on-road driving.
6. Pay the required fees and obtain your Class A CDL from the DMV.
Step-by-step process to obtain a Class A CDL license in New Hampshire:
1. Obtain a Commercial Driver's License (CDL) Manual from the Department of Motor Vehicles (DMV) website or any DMV office.
2. Meet the eligibility requirements, including being at least 18 years old, holding a valid driver's license, and passing a medical examination.
3. Obtain a Commercial Learner's Permit (CLP) by passing a written knowledge test and a vision test.
4. Hold the CLP for at least 14 days before taking the skills test.
5. Schedule and pass a skills test, which includes a pre-trip inspection, basic vehicle control, and on-road driving.
6. Pay the required fees and obtain your Class A CDL from the DMV.
With a Class A CDL license in New Hampshire, you can operate the following vehicles:
1. Combination of vehicles with a total weight of 26,001 pounds or more, provided that the vehicle being towed weighs more than 10,000 pounds.
2. Tractor-trailer combinations.
3. Truck and trailer combinations.
4. Livestock carriers.
5. Flatbeds.
6. Tank vehicles.
7. Double and triple trailers.
8. Any vehicle in Class B or C.
It is important to note that certain endorsements may be required to operate certain types of vehicles, such as hazardous materials or passenger endorsements.
1. Combination of vehicles with a total weight of 26,001 pounds or more, provided that the vehicle being towed weighs more than 10,000 pounds.
2. Tractor-trailer combinations.
3. Truck and trailer combinations.
4. Livestock carriers.
5. Flatbeds.
6. Tank vehicles.
7. Double and triple trailers.
8. Any vehicle in Class B or C.
It is important to note that certain endorsements may be required to operate certain types of vehicles, such as hazardous materials or passenger endorsements.
To obtain a Class A CDL license in New Hampshire, you must meet the following requirements:
1. Be at least 18 years old.
2. Hold a valid driver's license.
3. Pass a medical examination to ensure that you meet the physical requirements to operate a commercial motor vehicle.
4. Provide proof of citizenship or legal presence in the United States.
5. Provide your Social Security Number (SSN).
6. Pass a written knowledge test covering topics such as vehicle inspection, basic vehicle control, and safe driving practices.
7. Obtain a Commercial Learner's Permit (CLP) by passing the written knowledge test and a vision test.
8. Hold the CLP for at least 14 days before taking the skills test.
9. Pass a skills test, which includes a pre-trip inspection, basic vehicle control, and on-road driving.
10. Pay the required fees.
It is important to note that additional requirements may apply depending on your specific situation or the type of vehicle you intend to operate.
1. Be at least 18 years old.
2. Hold a valid driver's license.
3. Pass a medical examination to ensure that you meet the physical requirements to operate a commercial motor vehicle.
4. Provide proof of citizenship or legal presence in the United States.
5. Provide your Social Security Number (SSN).
6. Pass a written knowledge test covering topics such as vehicle inspection, basic vehicle control, and safe driving practices.
7. Obtain a Commercial Learner's Permit (CLP) by passing the written knowledge test and a vision test.
8. Hold the CLP for at least 14 days before taking the skills test.
9. Pass a skills test, which includes a pre-trip inspection, basic vehicle control, and on-road driving.
10. Pay the required fees.
It is important to note that additional requirements may apply depending on your specific situation or the type of vehicle you intend to operate.
In New Hampshire, the minimum age requirement for a Class A CDL license is 18 years old. However, if you plan to operate a commercial vehicle across state lines or transport hazardous materials, you must be at least 21 years old. Additionally, certain employers or insurance companies may have their own age requirements for drivers. It's important to check with the specific employer or company for their specific requirements.
Yes, you may need endorsements for a Class A CDL license depending on the type of vehicle you plan to operate and the cargo you plan to transport. The following endorsements are available:
1. Hazmat endorsement: required if you plan to transport hazardous materials.
2. Tanker endorsement: required if you plan to transport liquid or gaseous materials in a tank vehicle.
3. Doubles/triples endorsement: required if you plan to operate a combination of two or three trailers.
4. Passenger endorsement: required if you plan to operate a vehicle designed to transport 16 or more passengers, including the driver.
To obtain an endorsement, you must pass a knowledge test specific to that endorsement and meet any additional requirements, such as a background check for the hazmat endorsement. It's important to note that some endorsements may have age requirements or other restrictions.
1. Hazmat endorsement: required if you plan to transport hazardous materials.
2. Tanker endorsement: required if you plan to transport liquid or gaseous materials in a tank vehicle.
3. Doubles/triples endorsement: required if you plan to operate a combination of two or three trailers.
4. Passenger endorsement: required if you plan to operate a vehicle designed to transport 16 or more passengers, including the driver.
To obtain an endorsement, you must pass a knowledge test specific to that endorsement and meet any additional requirements, such as a background check for the hazmat endorsement. It's important to note that some endorsements may have age requirements or other restrictions.
The Class A CDL skills test in New Hampshire consists of three parts:
1. Pre-Trip Inspection: In this part, you will be required to perform a complete inspection of your vehicle and explain to the examiner what you are inspecting and why.
2. Basic Vehicle Control: In this part, you will be asked to perform various maneuvers, including backing up, turning, and parking your vehicle in a designated area.
3. On-Road Driving: In this part, you will be required to drive your vehicle on public roads while the examiner observes your performance. During the road test, you will be evaluated on your ability to safely operate your vehicle in traffic and follow traffic rules and regulations.
To pass the Class A CDL skills test, you must successfully complete all three parts of the test with a passing score. It is important to note that you must have a valid learner's permit and have completed all required training before taking the skills test.
1. Pre-Trip Inspection: In this part, you will be required to perform a complete inspection of your vehicle and explain to the examiner what you are inspecting and why.
2. Basic Vehicle Control: In this part, you will be asked to perform various maneuvers, including backing up, turning, and parking your vehicle in a designated area.
3. On-Road Driving: In this part, you will be required to drive your vehicle on public roads while the examiner observes your performance. During the road test, you will be evaluated on your ability to safely operate your vehicle in traffic and follow traffic rules and regulations.
To pass the Class A CDL skills test, you must successfully complete all three parts of the test with a passing score. It is important to note that you must have a valid learner's permit and have completed all required training before taking the skills test.
Yes, there are some restrictions and limitations for drivers with a Class A CDL license in New Hampshire. Some of the common restrictions and limitations are:
1. Intrastate only: If you have a Class A CDL license, but you only want to drive within the state of New Hampshire, you can be restricted to intrastate driving only.
2. Air brakes: If you do not pass the air brakes knowledge test or do not take the air brakes skills test in a vehicle equipped with air brakes, you will be restricted from operating vehicles with air brakes.
3. Automatic transmission: If you take the skills test in a vehicle with an automatic transmission, you will be restricted from operating vehicles with manual transmissions.
4. Hazmat endorsement: If you have a hazmat endorsement, there may be additional restrictions and requirements for transporting hazardous materials, such as background checks and security plans.
It is important to note that these restrictions and limitations may vary depending on your specific situation and the type of Class A CDL license you hold. You should always consult with the New Hampshire Department of Motor Vehicles for the most up-to-date information on any restrictions or limitations that may apply to your license.
1. Intrastate only: If you have a Class A CDL license, but you only want to drive within the state of New Hampshire, you can be restricted to intrastate driving only.
2. Air brakes: If you do not pass the air brakes knowledge test or do not take the air brakes skills test in a vehicle equipped with air brakes, you will be restricted from operating vehicles with air brakes.
3. Automatic transmission: If you take the skills test in a vehicle with an automatic transmission, you will be restricted from operating vehicles with manual transmissions.
4. Hazmat endorsement: If you have a hazmat endorsement, there may be additional restrictions and requirements for transporting hazardous materials, such as background checks and security plans.
It is important to note that these restrictions and limitations may vary depending on your specific situation and the type of Class A CDL license you hold. You should always consult with the New Hampshire Department of Motor Vehicles for the most up-to-date information on any restrictions or limitations that may apply to your license.
No, in New Hampshire, the Class A CDL written test is only offered in English. According to the New Hampshire Department of Motor Vehicles (DMV), all applicants must be able to read and understand the English language to pass the written test. The DMV does not offer translation services or written tests in any other language.
However, if you need assistance with the test due to a disability, you may request accommodations such as an oral exam or a sign language interpreter. You should contact the DMV before your test date to discuss your specific needs and how they can accommodate you.
It is important to note that all road signs and traffic signals are in English in New Hampshire, so being able to read and understand English is essential for safe driving on the roads.
However, if you need assistance with the test due to a disability, you may request accommodations such as an oral exam or a sign language interpreter. You should contact the DMV before your test date to discuss your specific needs and how they can accommodate you.
It is important to note that all road signs and traffic signals are in English in New Hampshire, so being able to read and understand English is essential for safe driving on the roads.
Yes, in New Hampshire, if you have a disability that affects your ability to take the Class A CDL written test, you may request accommodations. The New Hampshire Department of Motor Vehicles (DMV) provides reasonable accommodations to individuals with disabilities in accordance with the Americans with Disabilities Act (ADA).
Examples of accommodations that may be available include:
- Extended testing time
- Oral exam instead of written exam
- Large print or Braille exam materials
- Sign language interpreter
To request accommodations, you must contact the DMV before your scheduled test appointment and inform them of your disability and the specific accommodations you need. You will also need to provide documentation from a medical professional that verifies your disability and describes how it affects your ability to take the test.
Once your request for accommodations is approved, the DMV will work with you to schedule a test appointment that meets your needs. It is important to note that accommodations may take some time to arrange, so it is recommended that you contact the DMV as soon as possible to begin the process.
Examples of accommodations that may be available include:
- Extended testing time
- Oral exam instead of written exam
- Large print or Braille exam materials
- Sign language interpreter
To request accommodations, you must contact the DMV before your scheduled test appointment and inform them of your disability and the specific accommodations you need. You will also need to provide documentation from a medical professional that verifies your disability and describes how it affects your ability to take the test.
Once your request for accommodations is approved, the DMV will work with you to schedule a test appointment that meets your needs. It is important to note that accommodations may take some time to arrange, so it is recommended that you contact the DMV as soon as possible to begin the process.
Yes, if you fail the Class A CDL written test in New Hampshire, you can retake the test. However, you must wait at least one day before taking the test again. You will need to schedule a new appointment with the New Hampshire Department of Motor Vehicles (DMV) and pay the testing fee again.
It is important to note that if you fail the written test three times, you must wait at least 30 days before taking the test again. If you fail the test six times, you must wait at least 180 days before taking the test again.
To prepare for the Class A CDL written test, you can study the New Hampshire Commercial Driver License Manual, which is available on the DMV website or in person at a DMV office. You can also take practice tests online or through commercial study materials. It is important to take your preparation seriously and ensure that you fully understand all of the material before taking the exam.
It is important to note that if you fail the written test three times, you must wait at least 30 days before taking the test again. If you fail the test six times, you must wait at least 180 days before taking the test again.
To prepare for the Class A CDL written test, you can study the New Hampshire Commercial Driver License Manual, which is available on the DMV website or in person at a DMV office. You can also take practice tests online or through commercial study materials. It is important to take your preparation seriously and ensure that you fully understand all of the material before taking the exam.
