Knowledge Test Class A
This license is required for driving any legal combination of vehicles, with a gross combination weight rating of 26,001 pounds or more, provided the GVWR of a trailer exceeds 10,000 pounds To receive this license, applicants must pass a 50-question test. To pass, applicants must answer 40 questions correctly. Each question has three possible answer choices. Test questions come from the Rhode Island Commercial Driver License Manual. Questions come from chapters covering: Introduction, Driving Safely, Transporting Cargo Safely, Air Brakes (if applicable), Combination, Doubles and Hazardous Materials. Endorsements that may be used with a Class A CDL are: Hazardous materials, Tank, Passenger, HazMat and Tank, Air Brakes and School bus.
15. When alley docking, you should first:
If you are asked to alley dock, you should first pull past the alley and stop your vehicle in a position that is parallel to the outer boundary. From there, you should back your vehicle entirely into the alley parking area. Your vehicle should be parked in a straight position within the boundaries of the parking space.
16. When driving on a long downhill slope, you should brake by:
When approaching a long downgrade, you should shift into a lower gear then use proper braking techniques. Using the brakes alone could cause them to overheat and fail. The braking power of the engine, which is maximized by being in a lower gear, will be the principal way of controlling your speed on a downgrade.
17. Dry bulk tanks:
Driving with dry bulk tanks requires special care because they usually have high centers of gravity. It is also important for drivers to be prepared for the contents to shift in transit.
18. When starting your vehicle, the coolant temperature should:
Watch the gauges in your vehicle before starting a trip. After starting your vehicle's engine, the coolant temperature should begin a gradual rise to the normal operating range.
19. To avoid a hazard, you:
Stopping is not always the best way to avoid a hazard. If there is not enough space for you to stop to avoid coming into contact with the hazard, swerving out of the way may be your safest option.
20. If the safety relief valve in the air brake system releases air:
An air brake system has a safety relief valve, which releases air from the tanks if the pressure gets too high. If the valve must operate, something in the system is wrong and should be addressed by a mechanic.
21. Which of the following is not a good rule when using turn signals?
When using your turn signals, you should signal well before the turn or lane change, signal continuously throughout the turn or lane change, and cancel the signal after you have completed your move.
Ranked by best match
Frequently Asked Questions
To obtain a Class A CDL in Rhode Island, the driver must first obtain a commercial learner's permit (CLP) by passing a written test and meeting other requirements. Once the driver has held the CLP for at least 14 days, they can take the skills test, which consists of a pre-trip inspection, basic control skills test, and road test.
The driver must also pass a medical examination and provide proof of residency and identity. Additionally, they must provide their driving history from all states where they have held a driver's license in the past 10 years.
It is important for drivers to be familiar with all Rhode Island traffic laws and regulations related to commercial driving before obtaining their Class A CDL.
1. Tractor-trailers
2. Livestock carriers
3. Tanker trucks
4. Flatbed trucks
5. Double and triple trailers
6. Refrigerated trucks
It is important to note that drivers with a Class A CDL are also authorized to operate vehicles in Class B and Class C categories, which include buses and other commercial vehicles with lower weight ratings. However, drivers must obtain the appropriate endorsements for these types of vehicles before operating them commercially.
1. Age: You must be at least 18 years old to obtain a CDL, but you will be restricted to intrastate operation only. If you want to operate across state lines, you must be at least 21 years old.
2. Valid driver's license: You must have a valid Rhode Island driver's license.
3. Medical certificate: You must pass a medical examination and obtain a valid medical certificate from an approved medical examiner.
4. Commercial Learner's Permit (CLP): You must obtain a CLP by passing a written knowledge test and paying the required fee. You must hold the CLP for at least 14 days before taking the CDL skills test.
5. Driving Record: You must provide your driving record from all states where you have held a driver's license in the past 10 years.
6. Skills test: You must pass a skills test consisting of a pre-trip inspection, basic control skills test, and road test.
7. Fees: You must pay the required fees for obtaining the CDL and any endorsements.
It is important to note that additional requirements may apply depending on your specific situation or the type of vehicle you plan to operate.
If you want to operate commercial vehicles across state lines, you must be at least 21 years old to obtain a Class A CDL license.
The most common endorsements for a Class A CDL license are:
1. T - Double/Triple Trailers: This endorsement allows you to tow double or triple trailers.
2. P - Passenger: This endorsement allows you to operate a vehicle designed to transport 16 or more passengers, including the driver.
3. N - Tank Vehicles: This endorsement allows you to operate a vehicle designed to transport liquids or gases.
4. H - Hazardous Materials: This endorsement allows you to transport hazardous materials as defined by the Federal Motor Carrier Safety Administration (FMCSA).
To obtain an endorsement, you must pass additional knowledge and skills tests and pay the required fees. It is important to note that some endorsements may have additional requirements, such as background checks or TSA security threat assessments for the Hazardous Materials endorsement.
1. Pre-Trip Inspection: You will be asked to perform a pre-trip inspection of your vehicle to ensure that it is safe to operate. This includes checking the vehicle's brakes, tires, lights, signals, and other important components.
2. Road Test: You will be asked to demonstrate your driving skills on the road. The examiner will evaluate your ability to perform basic driving maneuvers such as turning, backing up, and parking. You will also be asked to demonstrate your ability to change lanes, merge into traffic, and safely navigate intersections.
In addition to these basic driving maneuvers, you may also be asked to demonstrate your ability to operate a vehicle with specific features such as air brakes or double/triple trailers if you have the appropriate endorsements.
It is important to note that the Class A CDL skills test is a rigorous exam that requires significant preparation and practice. It is recommended that you enroll in a CDL training program and practice driving with an experienced CDL driver before attempting the skills test.
1. E - No Manual Transmission - This restriction is placed on drivers who take their skills test in a vehicle with an automatic transmission. It means that the driver is only authorized to operate vehicles with automatic transmissions.
2. L - No Air Brake - This restriction is placed on drivers who have not passed the air brake knowledge test or who have not completed the required training to operate vehicles with air brakes.
3. Z - No Full Air Brake - This restriction is placed on drivers who have not passed the air brake knowledge test or who have not completed the required training to operate vehicles with full air brakes.
4. O - No Tractor-Trailer - This restriction is placed on drivers who have only taken their skills test in a combination vehicle that does not meet the definition of a tractor-trailer.
It is important to note that restrictions can vary depending on the state and circumstances. Additionally, some endorsements may also come with their own set of restrictions or requirements, such as additional training or background checks for the Hazardous Materials endorsement.
Drivers should also be aware of federal regulations regarding hours of service, weight limits, and other important safety considerations when operating a commercial vehicle.
However, if you have difficulty reading or understanding English, you may be able to receive assistance from an interpreter. The interpreter must be fluent in both English and your preferred language and must not be a family member or friend.
It is important to note that while an interpreter can assist with the written test, they are not allowed to help you with the actual content of the test or provide any answers. Additionally, all road signs and safety instructions will be in English, so it is important to have a basic understanding of the language before operating a commercial vehicle on the road.
To request accommodations, you must complete the DMV's Request for Reasonable Accommodation form and submit it along with documentation of your disability. The documentation must be from a licensed healthcare provider and should include a diagnosis, a description of your functional limitations, and recommendations for accommodations.
Examples of accommodations that may be provided include extended testing time, a separate testing room, the use of assistive technology, or a test in an alternative format. The DMV will review your request and determine what accommodations are appropriate based on your individual needs.
It is important to note that the DMV may require additional documentation or evaluations to determine eligibility for accommodations. It is recommended that you submit your request as early as possible to allow time for processing.
The exact waiting period may vary depending on the specific test and location, so it is important to check with the Rhode Island Division of Motor Vehicles (DMV) for specific details.
It is also important to note that there is a limit to the number of times you can take the test. If you fail the test a certain number of times (usually three), you may be required to wait a longer period of time before retaking the test or may be required to complete additional training before being allowed to take the test again.
If you continue to have difficulty passing the written test, it may be beneficial to seek additional training or study materials to help improve your understanding of the material. The DMV also offers study guides and practice tests that can help prepare you for the exam.