Bus
This endorsement is required for driving a school bus. To receive this endorsement, applicants must pass a test. The test consists of 20 multiple choice questions. To pass, the applicant must answer at least 16 questions correctly. Each question has four possible answer choices. Test questions come from the Commercial Driver Guide. Questions come from chapters covering: School Buses, Pre-Trip Vehicle Inspection Test, Basic Vehicle Control Skills Test and On-Road Driving. The School Bus endorsement can be used with the Class A, B or C CDL.
Number of Question
Passing Score
15. At a passive railroad crossing, the decision to proceed:
Explanation
Railroad crossings that do not have any kind of traffic control device are known as passive crossings. The decision to proceed across tracks at a passive crossing is entirely up to the driver.
16. If exiting a bus, a driver must:
Explanation
When exiting your vehicle during the basic vehicle control skills test, you must face the vehicle and maintain three points of contact at all times. If your testing vehicle is a bus, you must maintain contact with the handrail. Exiting the vehicle incorrectly may result in automatic failure of the basic vehicle control skills test.
17. When completing a conventional parallel parking maneuver, you should:
Explanation
You may be asked to complete a conventional parallel parking maneuver into a parking space that is to the right of your vehicle. You should drive past the parking space before backing into it while bringing the rear of your vehicle as close to the rear of the space as possible. Your vehicle should be completely within the boundaries of the space.
18. Before a trip, you should make sure that:
Explanation
When checking your vehicle's pedals during a pre-trip inspection, you should ensure that there is nothing under or around the pedals that will obstruct their use. Make sure the pedals are in proper working condition and that the surfaces of the pedals are grooved, if applicable.
19. When dropping off students at a school, a driver should:
Explanation
When unloading students at a school, a bus driver must secure the bus by turning off the engine. If they must leave the driver's compartment, they should remove the key from the ignition. The driver must supervise the unloading process.
20. With the exception of the straight line backing exercise, a driver may exit their vehicle and check its position during testing exercises up to:
Explanation
A driver is allowed to exit their vehicle to check its position during any basic vehicle control skills test exercise. This action is called a "look." During the straight line backing exercise, a driver may not exceed one look. During any other exercise, a driver may not exceed two looks.
Ranked by best match
Frequently Asked Questions
To obtain a CDL (Commercial Driver's License) Bus endorsement in Washington, you need to follow these steps:
1. Meet the eligibility requirements: You must be at least 18 years old, have a valid Washington State driver's license, and have a clean driving record.
2. Obtain a Commercial Learner's Permit (CLP): To obtain a CLP, you must pass a written knowledge test specific to the type of commercial vehicle you plan to drive. You will also need to pass a vision test and provide proof of U.S. citizenship or legal permanent residency.
3. Gain experience and training: You must complete training from a certified CDL training school or through an employer's training program. You will also need to log a certain number of hours behind the wheel of a commercial vehicle.
4. Pass a skills test: Once you have completed your training and gained experience, you will need to pass a skills test that includes a pre-trip inspection, basic control skills, and an on-road test.
5. Apply for the CDL with Bus endorsement: Once you have passed the skills test, you can apply for your CDL with Bus endorsement at any Washington State Department of Licensing office. You will need to provide proof of identity, residency, and citizenship or legal permanent residency. You will also need to pay the required fees.
6. Maintain your CDL Bus endorsement: To maintain your CDL Bus endorsement, you must follow all state and federal regulations, including passing regular medical exams and complying with all safety regulations.
1. Meet the eligibility requirements: You must be at least 18 years old, have a valid Washington State driver's license, and have a clean driving record.
2. Obtain a Commercial Learner's Permit (CLP): To obtain a CLP, you must pass a written knowledge test specific to the type of commercial vehicle you plan to drive. You will also need to pass a vision test and provide proof of U.S. citizenship or legal permanent residency.
3. Gain experience and training: You must complete training from a certified CDL training school or through an employer's training program. You will also need to log a certain number of hours behind the wheel of a commercial vehicle.
4. Pass a skills test: Once you have completed your training and gained experience, you will need to pass a skills test that includes a pre-trip inspection, basic control skills, and an on-road test.
5. Apply for the CDL with Bus endorsement: Once you have passed the skills test, you can apply for your CDL with Bus endorsement at any Washington State Department of Licensing office. You will need to provide proof of identity, residency, and citizenship or legal permanent residency. You will also need to pay the required fees.
6. Maintain your CDL Bus endorsement: To maintain your CDL Bus endorsement, you must follow all state and federal regulations, including passing regular medical exams and complying with all safety regulations.
To get a CDL Bus license in Washington, you must meet the following requirements:
1. Age: You must be at least 18 years old to drive within Washington state and 21 years old to drive across state lines or transport hazardous materials.
2. Valid Driver's License: You must have a valid Washington State driver's license.
3. Medical Certification: You must pass a medical examination and obtain a medical certificate from a qualified medical examiner listed on the National Registry of Certified Medical Examiners.
4. Commercial Learner's Permit (CLP): You must obtain a CLP and hold it for at least 14 days before taking the CDL skills test.
5. Knowledge Tests: You must pass the CDL general knowledge test, as well as any additional endorsement tests required for the type of bus you plan to operate (e.g., passenger endorsement).
6. Skills Test: You must pass a three-part skills test that includes a pre-trip inspection, basic control skills, and an on-road driving test.
7. Training: You must complete training from a certified CDL training school or through an employer's training program.
8. Background Check: You must pass a background check that includes a review of your driving record and criminal history.
9. Fees: You must pay the required fees for obtaining your CDL Bus license and any additional endorsements.
It is important to note that there may be additional requirements depending on the type of bus you plan to operate, such as obtaining a passenger endorsement or air brake endorsement.
1. Age: You must be at least 18 years old to drive within Washington state and 21 years old to drive across state lines or transport hazardous materials.
2. Valid Driver's License: You must have a valid Washington State driver's license.
3. Medical Certification: You must pass a medical examination and obtain a medical certificate from a qualified medical examiner listed on the National Registry of Certified Medical Examiners.
4. Commercial Learner's Permit (CLP): You must obtain a CLP and hold it for at least 14 days before taking the CDL skills test.
5. Knowledge Tests: You must pass the CDL general knowledge test, as well as any additional endorsement tests required for the type of bus you plan to operate (e.g., passenger endorsement).
6. Skills Test: You must pass a three-part skills test that includes a pre-trip inspection, basic control skills, and an on-road driving test.
7. Training: You must complete training from a certified CDL training school or through an employer's training program.
8. Background Check: You must pass a background check that includes a review of your driving record and criminal history.
9. Fees: You must pay the required fees for obtaining your CDL Bus license and any additional endorsements.
It is important to note that there may be additional requirements depending on the type of bus you plan to operate, such as obtaining a passenger endorsement or air brake endorsement.
Yes, you do need specific experience or training to obtain a CDL Bus endorsement in Washington.
First, you must have a valid Commercial Learner's Permit (CLP) and hold it for at least 14 days before taking the CDL skills test.
Second, you must complete training from a certified CDL training school or through an employer's training program. The training program should cover the knowledge and skills necessary to operate a commercial vehicle safely and efficiently. You will also need to log a certain number of hours behind the wheel of a commercial vehicle to gain practical experience.
Third, you must pass a three-part skills test that includes a pre-trip inspection, basic control skills, and an on-road driving test. The skills test will assess your ability to operate the vehicle safely in various driving situations.
It's important to note that the requirements for obtaining a CDL Bus endorsement may vary depending on the type of bus you plan to operate. For example, if you plan to drive a bus with air brakes, you may need to obtain an air brake endorsement in addition to the passenger endorsement.
First, you must have a valid Commercial Learner's Permit (CLP) and hold it for at least 14 days before taking the CDL skills test.
Second, you must complete training from a certified CDL training school or through an employer's training program. The training program should cover the knowledge and skills necessary to operate a commercial vehicle safely and efficiently. You will also need to log a certain number of hours behind the wheel of a commercial vehicle to gain practical experience.
Third, you must pass a three-part skills test that includes a pre-trip inspection, basic control skills, and an on-road driving test. The skills test will assess your ability to operate the vehicle safely in various driving situations.
It's important to note that the requirements for obtaining a CDL Bus endorsement may vary depending on the type of bus you plan to operate. For example, if you plan to drive a bus with air brakes, you may need to obtain an air brake endorsement in addition to the passenger endorsement.
Yes, there are different classes or types of CDL Bus licenses in Washington.
The classes of CDL licenses are based on the weight of the vehicle and the type of load being transported.
Class A CDL: This license is required to operate a combination of vehicles with a total weight of 26,001 pounds or more, including a towed vehicle that weighs more than 10,000 pounds.
Class B CDL: This license is required to operate a single vehicle with a weight of 26,001 pounds or more, or to operate a combination of vehicles with a total weight of less than 26,001 pounds but with a towed vehicle that weighs less than 10,000 pounds.
Class C CDL: This license is required to operate a single vehicle or combination of vehicles that does not meet the definition of either Class A or Class B and is designed to transport either more than 16 passengers (including the driver) or hazardous materials.
In addition to the classes, there are also different types of endorsements that may be required depending on the type of bus you plan to operate. For example, you may need a passenger endorsement to transport passengers or a school bus endorsement if you plan to drive a school bus. There are also other endorsements available for specific types of cargo such as hazardous materials.
The classes of CDL licenses are based on the weight of the vehicle and the type of load being transported.
Class A CDL: This license is required to operate a combination of vehicles with a total weight of 26,001 pounds or more, including a towed vehicle that weighs more than 10,000 pounds.
Class B CDL: This license is required to operate a single vehicle with a weight of 26,001 pounds or more, or to operate a combination of vehicles with a total weight of less than 26,001 pounds but with a towed vehicle that weighs less than 10,000 pounds.
Class C CDL: This license is required to operate a single vehicle or combination of vehicles that does not meet the definition of either Class A or Class B and is designed to transport either more than 16 passengers (including the driver) or hazardous materials.
In addition to the classes, there are also different types of endorsements that may be required depending on the type of bus you plan to operate. For example, you may need a passenger endorsement to transport passengers or a school bus endorsement if you plan to drive a school bus. There are also other endorsements available for specific types of cargo such as hazardous materials.
No, you cannot use your personal vehicle for the CDL Bus driving test in Washington.
The CDL driving test must be taken in the type of commercial vehicle that you plan to operate. This means that you must have access to a commercial vehicle that meets the requirements for the type of CDL license and endorsement you are seeking.
Typically, the CDL driving test is conducted by a certified examiner who will assess your ability to safely operate the commercial vehicle in various driving situations. The examiner will evaluate your skills in performing pre-trip inspections, basic control maneuvers, and on-road driving.
You may be able to rent a commercial vehicle from a CDL training school or a truck rental company for the purpose of taking the CDL driving test. It's important to check with the testing location for specific requirements and restrictions on the use of commercial vehicles for the driving test.
The CDL driving test must be taken in the type of commercial vehicle that you plan to operate. This means that you must have access to a commercial vehicle that meets the requirements for the type of CDL license and endorsement you are seeking.
Typically, the CDL driving test is conducted by a certified examiner who will assess your ability to safely operate the commercial vehicle in various driving situations. The examiner will evaluate your skills in performing pre-trip inspections, basic control maneuvers, and on-road driving.
You may be able to rent a commercial vehicle from a CDL training school or a truck rental company for the purpose of taking the CDL driving test. It's important to check with the testing location for specific requirements and restrictions on the use of commercial vehicles for the driving test.
Yes, there are specific skills and maneuvers that you will need to demonstrate during the CDL Bus driving test in Washington.
The CDL Bus driving test consists of three parts: the pre-trip inspection, basic control skills, and on-road driving.
During the pre-trip inspection, you will need to demonstrate your knowledge of the vehicle's components and safety features by identifying and explaining various parts of the vehicle. You will also need to perform a walk-around inspection of the vehicle to check for any defects or safety issues.
During the basic control skills test, you will need to demonstrate your ability to control the vehicle in various situations such as backing up, turning, and parking. You may also be required to demonstrate your ability to control the vehicle on a straight line and on a curve.
During the on-road driving test, you will need to demonstrate your ability to safely operate the vehicle on public roads with other vehicles and pedestrians. The examiner will evaluate your ability to perform various driving maneuvers such as merging onto a highway, changing lanes, making turns, and responding to traffic signals and signs.
In addition to these specific skills and maneuvers, you will also be evaluated on your general driving skills such as following distance, speed control, and overall safe driving practices.
The CDL Bus driving test consists of three parts: the pre-trip inspection, basic control skills, and on-road driving.
During the pre-trip inspection, you will need to demonstrate your knowledge of the vehicle's components and safety features by identifying and explaining various parts of the vehicle. You will also need to perform a walk-around inspection of the vehicle to check for any defects or safety issues.
During the basic control skills test, you will need to demonstrate your ability to control the vehicle in various situations such as backing up, turning, and parking. You may also be required to demonstrate your ability to control the vehicle on a straight line and on a curve.
During the on-road driving test, you will need to demonstrate your ability to safely operate the vehicle on public roads with other vehicles and pedestrians. The examiner will evaluate your ability to perform various driving maneuvers such as merging onto a highway, changing lanes, making turns, and responding to traffic signals and signs.
In addition to these specific skills and maneuvers, you will also be evaluated on your general driving skills such as following distance, speed control, and overall safe driving practices.
Yes, there are additional medical and physical requirements for a CDL Bus endorsement in Washington.
To obtain a CDL Bus endorsement, you must meet the federal medical standards set by the Federal Motor Carrier Safety Administration (FMCSA). This includes passing a medical examination conducted by a certified medical examiner who is listed on the National Registry of Certified Medical Examiners.
The medical examination will evaluate your overall physical health and ability to safely operate a commercial motor vehicle. The exam will assess your vision, hearing, blood pressure, heart function, respiratory health, and other factors that may impact your ability to drive safely.
You must also disclose any medical conditions or disabilities that may affect your ability to safely operate a commercial vehicle. Some medical conditions may require additional testing or documentation before you can obtain a CDL Bus endorsement.
It's important to note that some medical conditions or medications may disqualify you from obtaining a CDL Bus endorsement. You should consult with a certified medical examiner and the FMCSA regulations to determine if you meet the medical and physical requirements for a CDL Bus endorsement.
To obtain a CDL Bus endorsement, you must meet the federal medical standards set by the Federal Motor Carrier Safety Administration (FMCSA). This includes passing a medical examination conducted by a certified medical examiner who is listed on the National Registry of Certified Medical Examiners.
The medical examination will evaluate your overall physical health and ability to safely operate a commercial motor vehicle. The exam will assess your vision, hearing, blood pressure, heart function, respiratory health, and other factors that may impact your ability to drive safely.
You must also disclose any medical conditions or disabilities that may affect your ability to safely operate a commercial vehicle. Some medical conditions may require additional testing or documentation before you can obtain a CDL Bus endorsement.
It's important to note that some medical conditions or medications may disqualify you from obtaining a CDL Bus endorsement. You should consult with a certified medical examiner and the FMCSA regulations to determine if you meet the medical and physical requirements for a CDL Bus endorsement.
No, you cannot transport passengers without a CDL Bus endorsement in Washington.
To legally operate a commercial motor vehicle designed to transport passengers, you must have a CDL with a passenger endorsement (P) and/or a school bus endorsement (S). These endorsements are required by federal and state regulations and are necessary to ensure that drivers have the necessary knowledge and skills to safely transport passengers.
It's important to note that driving a vehicle designed to transport passengers without the proper endorsements is illegal and can result in fines, penalties, and even the suspension or revocation of your driver's license.
To obtain a CDL Bus endorsement in Washington, you must pass the appropriate knowledge tests and driving skills tests. Additionally, you must meet the medical and physical requirements set by the Federal Motor Carrier Safety Administration (FMCSA).
Once you have obtained your CDL Bus endorsement, you must also comply with all other regulations related to the transportation of passengers, including hours of service regulations, vehicle inspections, and other safety requirements.
To legally operate a commercial motor vehicle designed to transport passengers, you must have a CDL with a passenger endorsement (P) and/or a school bus endorsement (S). These endorsements are required by federal and state regulations and are necessary to ensure that drivers have the necessary knowledge and skills to safely transport passengers.
It's important to note that driving a vehicle designed to transport passengers without the proper endorsements is illegal and can result in fines, penalties, and even the suspension or revocation of your driver's license.
To obtain a CDL Bus endorsement in Washington, you must pass the appropriate knowledge tests and driving skills tests. Additionally, you must meet the medical and physical requirements set by the Federal Motor Carrier Safety Administration (FMCSA).
Once you have obtained your CDL Bus endorsement, you must also comply with all other regulations related to the transportation of passengers, including hours of service regulations, vehicle inspections, and other safety requirements.
You can add the CDL Bus endorsement to your existing CDL license in Washington.
To add the CDL Bus endorsement to your existing CDL license, you will need to pass the appropriate knowledge and skills tests for the endorsement. You may also need to meet additional medical and physical requirements before you can add the endorsement.
To add the endorsement, you will need to visit a Department of Licensing (DOL) office and complete an application for a CDL Bus endorsement. You will also need to provide proof of identity, residency, and citizenship or legal presence, as well as any other documentation required by the DOL.
Once you have completed the application process and passed the required tests, the CDL Bus endorsement will be added to your existing CDL license. You will receive a new license with the endorsement listed on it.
It's important to note that adding a CDL Bus endorsement may also require additional training, depending on your driving experience and the type of vehicle you will be operating. You should consult with your employer and/or a qualified driving school or training program to ensure that you have the necessary skills and knowledge to safely operate a commercial motor vehicle designed to transport passengers.
To add the CDL Bus endorsement to your existing CDL license, you will need to pass the appropriate knowledge and skills tests for the endorsement. You may also need to meet additional medical and physical requirements before you can add the endorsement.
To add the endorsement, you will need to visit a Department of Licensing (DOL) office and complete an application for a CDL Bus endorsement. You will also need to provide proof of identity, residency, and citizenship or legal presence, as well as any other documentation required by the DOL.
Once you have completed the application process and passed the required tests, the CDL Bus endorsement will be added to your existing CDL license. You will receive a new license with the endorsement listed on it.
It's important to note that adding a CDL Bus endorsement may also require additional training, depending on your driving experience and the type of vehicle you will be operating. You should consult with your employer and/or a qualified driving school or training program to ensure that you have the necessary skills and knowledge to safely operate a commercial motor vehicle designed to transport passengers.
Yes, there are restrictions and limitations for drivers with a CDL Bus endorsement in Washington.
Some of the restrictions and limitations for CDL Bus endorsement holders include:
1. Passenger limits: Depending on the type of vehicle you are operating and the type of endorsement you have, there may be limits on the number of passengers you can transport.
2. Hours of service: Like all commercial drivers, CDL Bus endorsement holders are subject to hours of service regulations that limit the number of hours they can drive and require specific rest breaks.
3. Vehicle size: Depending on the type of endorsement you have, there may be restrictions on the size and weight of the vehicle you are permitted to operate.
4. Medical requirements: CDL Bus endorsement holders must meet specific medical requirements to ensure they are physically capable of operating a commercial vehicle designed to transport passengers.
5. Endorsement renewal: CDL Bus endorsements must be renewed every four years, and drivers must pass knowledge and skills tests at each renewal.
It's important to note that violating any of these restrictions or limitations can result in fines, penalties, or even the suspension or revocation of your CDL license. To avoid any issues, it's essential to understand and comply with all applicable rules and regulations related to your CDL Bus endorsement.
Some of the restrictions and limitations for CDL Bus endorsement holders include:
1. Passenger limits: Depending on the type of vehicle you are operating and the type of endorsement you have, there may be limits on the number of passengers you can transport.
2. Hours of service: Like all commercial drivers, CDL Bus endorsement holders are subject to hours of service regulations that limit the number of hours they can drive and require specific rest breaks.
3. Vehicle size: Depending on the type of endorsement you have, there may be restrictions on the size and weight of the vehicle you are permitted to operate.
4. Medical requirements: CDL Bus endorsement holders must meet specific medical requirements to ensure they are physically capable of operating a commercial vehicle designed to transport passengers.
5. Endorsement renewal: CDL Bus endorsements must be renewed every four years, and drivers must pass knowledge and skills tests at each renewal.
It's important to note that violating any of these restrictions or limitations can result in fines, penalties, or even the suspension or revocation of your CDL license. To avoid any issues, it's essential to understand and comply with all applicable rules and regulations related to your CDL Bus endorsement.
