Bus
This endorsement is required for driving a school bus. To receive this endorsement, applicants must pass a test. The test consists of 20 multiple choice questions. To pass, the applicant must answer at least 16 questions correctly. Each question has three or four possible answer choices. Test questions come from the Wisconsin Commercial Driver’s Manual. Questions come from chapter covering School Buses. The School Bus endorsement can be used with the Class A, B or C CDL.
Number of Question
Passing Score
15. If your bus stalls on a railroad track, what should you do?
Explanation
If a school bus becomes stalled or trapped on railroad tracks, the driver should get everyone out of the bus and off of the tracks immediately. The driver and students should move away from the tracks at an angle and in the direction of any oncoming train.
16. When dropping off students at a school, a driver should:
Explanation
When unloading students at a school, a bus driver must secure the bus by turning off the engine. If they must leave the driver's compartment, they should remove the key from the ignition. The driver must supervise the unloading process.
17. When students are being picked up by a school bus:
Explanation
A school bus driver should load and unload students only at designated stops that have been approved by appropriate school district officials.
18. Active railroad crossings:
Explanation
Railroad crossings with control devices to regulate traffic are known as active crossings. Control devices may include regulators such as flashing red lights, warning bells, and gates. Drivers are required by law to follow instructions given by control devices.
19. As a general rule, where should students be kept during an emergency?
Explanation
In most emergency or crisis situations, students on a school bus will be safer and more easily controlled if they are kept on the bus than if they are evacuated. However, if staying on a bus will expose the students to risk or injury, the bus driver should escort them to a safe location.
20. The overhead rearview mirror is located:
Explanation
On a school bus, the overhead inside rearview mirror is mounted directly above the windshield on the driver’s side of the bus. This mirror should be used to monitor students inside the bus.
Ranked by best match
Frequently Asked Questions
To obtain a CDL Bus endorsement in Wisconsin, you will need to follow these steps:
1. Obtain a Wisconsin Commercial Driver's License (CDL) by passing a written knowledge test and a skills test in a commercial motor vehicle.
2. Complete the required training for the Bus endorsement. You must complete a training program that is approved by the Wisconsin Department of Transportation (WisDOT) or have at least two years of recent experience in operating buses.
3. Pass the Bus endorsement knowledge test. You must pass a written knowledge test that is specific to the Bus endorsement. The test will cover topics such as driving techniques, passenger safety, and emergency procedures.
4. Pass the Bus endorsement skills test. You must pass a skills test that includes a pre-trip inspection, basic vehicle control, and an on-road driving test.
5. Pay the required fees. There are fees associated with obtaining a CDL and adding endorsements, so be sure to check with WisDOT for the current fees.
6. Submit all required documents and forms to WisDOT. This may include your application, proof of identity and residency, proof of training or experience, and any other required documentation.
Once you have completed these steps and have been approved by WisDOT, you will receive your CDL with Bus endorsement.
1. Obtain a Wisconsin Commercial Driver's License (CDL) by passing a written knowledge test and a skills test in a commercial motor vehicle.
2. Complete the required training for the Bus endorsement. You must complete a training program that is approved by the Wisconsin Department of Transportation (WisDOT) or have at least two years of recent experience in operating buses.
3. Pass the Bus endorsement knowledge test. You must pass a written knowledge test that is specific to the Bus endorsement. The test will cover topics such as driving techniques, passenger safety, and emergency procedures.
4. Pass the Bus endorsement skills test. You must pass a skills test that includes a pre-trip inspection, basic vehicle control, and an on-road driving test.
5. Pay the required fees. There are fees associated with obtaining a CDL and adding endorsements, so be sure to check with WisDOT for the current fees.
6. Submit all required documents and forms to WisDOT. This may include your application, proof of identity and residency, proof of training or experience, and any other required documentation.
Once you have completed these steps and have been approved by WisDOT, you will receive your CDL with Bus endorsement.
To obtain a CDL Bus license in Wisconsin, you must meet the following requirements:
1. Age: You must be at least 18 years old to obtain a CDL Bus license. However, you must be at least 21 years old to drive a commercial vehicle across state lines or transport hazardous materials.
2. Valid Driver's License: You must have a valid Wisconsin driver's license.
3. Medical Certification: You must pass a medical examination and obtain a medical certificate from a licensed medical examiner. This certificate must be updated every two years.
4. CDL Permit: You must obtain a Commercial Learner's Permit (CLP) by passing a written knowledge test for the type of vehicle you plan to operate.
5. CDL Skills Test: You must pass a skills test in a commercial motor vehicle (CMV) that is similar to the type of vehicle you plan to operate.
6. Background Check: You will need to pass a background check and disclose any previous criminal convictions.
7. Residency: You must be a resident of Wisconsin or have proof of employment in the state.
8. Training: You will need to complete a training program that is approved by the Wisconsin Department of Transportation (WisDOT) or have at least two years of recent experience in operating buses.
Keep in mind that these requirements are subject to change, so be sure to check with WisDOT for the most up-to-date information and requirements.
1. Age: You must be at least 18 years old to obtain a CDL Bus license. However, you must be at least 21 years old to drive a commercial vehicle across state lines or transport hazardous materials.
2. Valid Driver's License: You must have a valid Wisconsin driver's license.
3. Medical Certification: You must pass a medical examination and obtain a medical certificate from a licensed medical examiner. This certificate must be updated every two years.
4. CDL Permit: You must obtain a Commercial Learner's Permit (CLP) by passing a written knowledge test for the type of vehicle you plan to operate.
5. CDL Skills Test: You must pass a skills test in a commercial motor vehicle (CMV) that is similar to the type of vehicle you plan to operate.
6. Background Check: You will need to pass a background check and disclose any previous criminal convictions.
7. Residency: You must be a resident of Wisconsin or have proof of employment in the state.
8. Training: You will need to complete a training program that is approved by the Wisconsin Department of Transportation (WisDOT) or have at least two years of recent experience in operating buses.
Keep in mind that these requirements are subject to change, so be sure to check with WisDOT for the most up-to-date information and requirements.
Yes, you will need to have specific experience or training to obtain a CDL Bus endorsement in Wisconsin. Here are the details:
1. Training Program: You must complete a training program that is approved by the Wisconsin Department of Transportation (WisDOT). The program must be designed to train individuals in the operation of buses and must include both classroom and behind-the-wheel instruction.
2. Experience: If you do not complete an approved training program, you must have at least two years of recent experience operating buses. The experience must be obtained within the past five years and must be verified by your employer.
3. Passenger Endorsement: In addition to the Bus endorsement, you will also need to obtain a Passenger endorsement if you plan to transport passengers. To obtain this endorsement, you will need to pass a knowledge test and a skills test that are specific to passenger vehicles.
Keep in mind that some employers may have additional requirements for their bus drivers, such as completing a specific training program or having a certain amount of driving experience. It's always a good idea to check with your employer or potential employers for any additional requirements they may have.
1. Training Program: You must complete a training program that is approved by the Wisconsin Department of Transportation (WisDOT). The program must be designed to train individuals in the operation of buses and must include both classroom and behind-the-wheel instruction.
2. Experience: If you do not complete an approved training program, you must have at least two years of recent experience operating buses. The experience must be obtained within the past five years and must be verified by your employer.
3. Passenger Endorsement: In addition to the Bus endorsement, you will also need to obtain a Passenger endorsement if you plan to transport passengers. To obtain this endorsement, you will need to pass a knowledge test and a skills test that are specific to passenger vehicles.
Keep in mind that some employers may have additional requirements for their bus drivers, such as completing a specific training program or having a certain amount of driving experience. It's always a good idea to check with your employer or potential employers for any additional requirements they may have.
Yes, there are different classes or types of CDL Bus licenses in Wisconsin. Here are the details:
1. Class B CDL: This license allows you to operate a single vehicle with a GVWR of 26,001 or more pounds, or a combination of vehicles with a GCWR of 26,001 or more pounds. This class includes buses that weigh less than 26,001 pounds.
2. Class A CDL: This license allows you to operate a combination of vehicles with a GCWR of 26,001 or more pounds, as long as the vehicle being towed weighs more than 10,000 pounds. This class includes buses that weigh more than 26,001 pounds.
3. Passenger Endorsement: This endorsement is required for drivers who will be transporting passengers in a commercial vehicle. It is required in addition to the Class A or B CDL.
4. School Bus Endorsement: This endorsement is required for drivers who will be operating a school bus.
It's important to note that there may be additional endorsements or restrictions that apply based on the type of bus you will be operating. For example, if you will be transporting hazardous materials on your bus, you will need to obtain a Hazardous Materials endorsement. It's always a good idea to check with the Wisconsin Department of Transportation (WisDOT) or your employer for any additional requirements that may apply to your specific situation.
1. Class B CDL: This license allows you to operate a single vehicle with a GVWR of 26,001 or more pounds, or a combination of vehicles with a GCWR of 26,001 or more pounds. This class includes buses that weigh less than 26,001 pounds.
2. Class A CDL: This license allows you to operate a combination of vehicles with a GCWR of 26,001 or more pounds, as long as the vehicle being towed weighs more than 10,000 pounds. This class includes buses that weigh more than 26,001 pounds.
3. Passenger Endorsement: This endorsement is required for drivers who will be transporting passengers in a commercial vehicle. It is required in addition to the Class A or B CDL.
4. School Bus Endorsement: This endorsement is required for drivers who will be operating a school bus.
It's important to note that there may be additional endorsements or restrictions that apply based on the type of bus you will be operating. For example, if you will be transporting hazardous materials on your bus, you will need to obtain a Hazardous Materials endorsement. It's always a good idea to check with the Wisconsin Department of Transportation (WisDOT) or your employer for any additional requirements that may apply to your specific situation.
No, you cannot use your personal vehicle for the CDL Bus driving test in Wisconsin. You must use a vehicle that meets the specifications set by the Wisconsin Department of Transportation (WisDOT) for the type of CDL license you are seeking.
For the driving test, you will need to provide a vehicle that meets the following requirements:
1. Class B CDL: A single vehicle with a GVWR of 26,001 or more pounds, or a combination of vehicles with a GCWR of 26,001 or more pounds. The vehicle must have air brakes if you plan to operate a bus with air brakes.
2. Class A CDL: A combination of vehicles with a GCWR of 26,001 or more pounds, as long as the vehicle being towed weighs more than 10,000 pounds. The vehicle must have air brakes if you plan to operate a bus with air brakes.
3. Passenger Endorsement: A bus that is designed to transport passengers and has at least 16 seats (including the driver's seat).
It's important to note that the vehicle you provide for the driving test must be in good working condition and meet all safety requirements set by WisDOT. If you are unsure about whether your vehicle meets these requirements, it's best to contact WisDOT for guidance.
For the driving test, you will need to provide a vehicle that meets the following requirements:
1. Class B CDL: A single vehicle with a GVWR of 26,001 or more pounds, or a combination of vehicles with a GCWR of 26,001 or more pounds. The vehicle must have air brakes if you plan to operate a bus with air brakes.
2. Class A CDL: A combination of vehicles with a GCWR of 26,001 or more pounds, as long as the vehicle being towed weighs more than 10,000 pounds. The vehicle must have air brakes if you plan to operate a bus with air brakes.
3. Passenger Endorsement: A bus that is designed to transport passengers and has at least 16 seats (including the driver's seat).
It's important to note that the vehicle you provide for the driving test must be in good working condition and meet all safety requirements set by WisDOT. If you are unsure about whether your vehicle meets these requirements, it's best to contact WisDOT for guidance.
Yes, there are specific skills and maneuvers that you will need to demonstrate during the CDL Bus driving test in Wisconsin. These skills and maneuvers are designed to test your ability to handle the vehicle safely and effectively in a variety of driving situations.
Here are some of the skills and maneuvers that may be included in the CDL Bus driving test:
1. Pre-Trip Inspection: You will need to perform a thorough inspection of the vehicle before you begin the driving portion of the test. This includes checking the brakes, steering, lights, tires, and other critical components.
2. Basic Vehicle Control: You will need to demonstrate your ability to control the vehicle in tight spaces, such as backing up and making tight turns.
3. On-Road Driving: You will need to demonstrate your ability to operate the vehicle safely on public roads. This includes following traffic signals and signs, changing lanes, merging onto highways, and navigating intersections.
4. Emergency Maneuvers: You may be asked to demonstrate your ability to respond to emergency situations, such as sudden stops or evasive maneuvers.
In addition to these skills and maneuvers, you will also be evaluated on your overall driving habits and attitude, such as your ability to maintain situational awareness, obey traffic laws, and maintain a safe following distance.
It's important to practice these skills and maneuvers before taking the CDL Bus driving test. You may want to consider taking a commercial driver training course or working with an experienced CDL driver to help you prepare for the test.
Here are some of the skills and maneuvers that may be included in the CDL Bus driving test:
1. Pre-Trip Inspection: You will need to perform a thorough inspection of the vehicle before you begin the driving portion of the test. This includes checking the brakes, steering, lights, tires, and other critical components.
2. Basic Vehicle Control: You will need to demonstrate your ability to control the vehicle in tight spaces, such as backing up and making tight turns.
3. On-Road Driving: You will need to demonstrate your ability to operate the vehicle safely on public roads. This includes following traffic signals and signs, changing lanes, merging onto highways, and navigating intersections.
4. Emergency Maneuvers: You may be asked to demonstrate your ability to respond to emergency situations, such as sudden stops or evasive maneuvers.
In addition to these skills and maneuvers, you will also be evaluated on your overall driving habits and attitude, such as your ability to maintain situational awareness, obey traffic laws, and maintain a safe following distance.
It's important to practice these skills and maneuvers before taking the CDL Bus driving test. You may want to consider taking a commercial driver training course or working with an experienced CDL driver to help you prepare for the test.
Yes, there are additional medical and physical requirements for a CDL Bus endorsement in Wisconsin. These requirements are in place to ensure that you are physically able to operate a commercial vehicle safely and effectively.
Here are some of the medical and physical requirements for a CDL Bus endorsement:
1. Medical Examination: You will need to pass a medical examination by a licensed medical examiner who is listed on the National Registry of Certified Medical Examiners. The medical examiner will evaluate your overall health, vision, hearing, and other factors that may affect your ability to drive safely.
2. Diabetes: If you have diabetes, you will need to provide documentation from your healthcare provider indicating that your diabetes is under control and does not interfere with your ability to drive safely.
3. Hearing: You must be able to hear a forced whisper from a distance of at least 5 feet with or without a hearing aid.
4. Vision: You must have at least 20/40 vision in each eye with or without corrective lenses. You must also have at least 70 degrees of peripheral vision in each eye.
5. Blood Pressure: Your blood pressure must be below 160/100. If your blood pressure is between 140/90 and 159/99, you may receive a one-time certification for up to one year while you work to lower your blood pressure.
6. Substance Abuse: You must be free from any substance abuse problems that may interfere with your ability to operate a commercial vehicle safely.
It's important to note that these requirements may vary depending on the specific type of CDL license and endorsement you are seeking. Be sure to consult with the Wisconsin Department of Transportation (WisDOT) for more information on the specific requirements for your CDL Bus endorsement.
Here are some of the medical and physical requirements for a CDL Bus endorsement:
1. Medical Examination: You will need to pass a medical examination by a licensed medical examiner who is listed on the National Registry of Certified Medical Examiners. The medical examiner will evaluate your overall health, vision, hearing, and other factors that may affect your ability to drive safely.
2. Diabetes: If you have diabetes, you will need to provide documentation from your healthcare provider indicating that your diabetes is under control and does not interfere with your ability to drive safely.
3. Hearing: You must be able to hear a forced whisper from a distance of at least 5 feet with or without a hearing aid.
4. Vision: You must have at least 20/40 vision in each eye with or without corrective lenses. You must also have at least 70 degrees of peripheral vision in each eye.
5. Blood Pressure: Your blood pressure must be below 160/100. If your blood pressure is between 140/90 and 159/99, you may receive a one-time certification for up to one year while you work to lower your blood pressure.
6. Substance Abuse: You must be free from any substance abuse problems that may interfere with your ability to operate a commercial vehicle safely.
It's important to note that these requirements may vary depending on the specific type of CDL license and endorsement you are seeking. Be sure to consult with the Wisconsin Department of Transportation (WisDOT) for more information on the specific requirements for your CDL Bus endorsement.
No, you cannot transport passengers without a CDL Bus endorsement in Wisconsin if your vehicle meets the definition of a commercial motor vehicle (CMV). A CMV is defined as a vehicle that:
- Has a gross vehicle weight rating (GVWR) or gross combination weight rating (GCWR) of 26,001 pounds or more; or
- Is designed to transport 16 or more passengers, including the driver; or
- Is used in the transportation of hazardous materials in quantities requiring placarding.
If your vehicle meets any of these criteria, you will need to have a CDL Bus endorsement to legally transport passengers.
To obtain a CDL Bus endorsement in Wisconsin, you will need to meet certain requirements, such as passing a skills test and obtaining a medical certificate from a licensed medical examiner. You may also need to complete additional training or education, depending on your specific situation.
It's important to note that operating a CMV without the proper endorsement can result in fines, penalties, and even the suspension or revocation of your driver's license. It's always best to ensure that you have the proper endorsements and training before operating any type of commercial vehicle.
- Has a gross vehicle weight rating (GVWR) or gross combination weight rating (GCWR) of 26,001 pounds or more; or
- Is designed to transport 16 or more passengers, including the driver; or
- Is used in the transportation of hazardous materials in quantities requiring placarding.
If your vehicle meets any of these criteria, you will need to have a CDL Bus endorsement to legally transport passengers.
To obtain a CDL Bus endorsement in Wisconsin, you will need to meet certain requirements, such as passing a skills test and obtaining a medical certificate from a licensed medical examiner. You may also need to complete additional training or education, depending on your specific situation.
It's important to note that operating a CMV without the proper endorsement can result in fines, penalties, and even the suspension or revocation of your driver's license. It's always best to ensure that you have the proper endorsements and training before operating any type of commercial vehicle.
You can add the CDL Bus endorsement to your existing CDL license in Wisconsin by taking and passing the appropriate knowledge and skills tests. You do not need to apply for a new CDL license.
To add the CDL Bus endorsement, you will need to:
1. Meet the eligibility requirements: This includes holding a valid Wisconsin CDL license and meeting any additional requirements for the Bus endorsement, such as obtaining a medical certificate from a licensed medical examiner.
2. Study for the Bus endorsement knowledge test: The knowledge test will cover topics such as passenger safety, loading and unloading, and emergency procedures. You can study for the test using the Wisconsin Commercial Driver's Manual.
3. Take and pass the Bus endorsement knowledge test: You will need to pass the knowledge test with a score of at least 80% to move on to the skills test.
4. Schedule and take the Bus endorsement skills test: The skills test will cover tasks such as pre-trip inspections, basic vehicle control, and on-road driving. You will need to provide your own vehicle that meets the requirements for a CMV with a passenger endorsement.
5. Receive your new CDL license with the Bus endorsement: If you pass both tests, you will receive your new CDL license with the Bus endorsement added.
It's important to note that there may be additional requirements or fees associated with adding a Bus endorsement to your CDL license in Wisconsin. Be sure to check with the Wisconsin Department of Transportation for more information on specific requirements and procedures.
To add the CDL Bus endorsement, you will need to:
1. Meet the eligibility requirements: This includes holding a valid Wisconsin CDL license and meeting any additional requirements for the Bus endorsement, such as obtaining a medical certificate from a licensed medical examiner.
2. Study for the Bus endorsement knowledge test: The knowledge test will cover topics such as passenger safety, loading and unloading, and emergency procedures. You can study for the test using the Wisconsin Commercial Driver's Manual.
3. Take and pass the Bus endorsement knowledge test: You will need to pass the knowledge test with a score of at least 80% to move on to the skills test.
4. Schedule and take the Bus endorsement skills test: The skills test will cover tasks such as pre-trip inspections, basic vehicle control, and on-road driving. You will need to provide your own vehicle that meets the requirements for a CMV with a passenger endorsement.
5. Receive your new CDL license with the Bus endorsement: If you pass both tests, you will receive your new CDL license with the Bus endorsement added.
It's important to note that there may be additional requirements or fees associated with adding a Bus endorsement to your CDL license in Wisconsin. Be sure to check with the Wisconsin Department of Transportation for more information on specific requirements and procedures.
Yes, there are some restrictions and limitations for drivers with a CDL Bus endorsement in Wisconsin. These restrictions may vary depending on the specific endorsement you hold and the type of vehicle you are driving. Here are some common restrictions and limitations:
1. Passenger limits: Depending on the endorsement and the type of vehicle, there may be a limit on the number of passengers you can transport.
2. Endorsement-specific limitations: Some endorsements, such as the School Bus endorsement, may have additional limitations or requirements, such as background checks or specific training.
3. Hazmat restrictions: If you also hold a Hazardous Materials (H) endorsement, there may be additional restrictions on transporting hazardous materials.
4. Medical requirements: To maintain your CDL and any endorsements, you must meet certain medical requirements, such as obtaining and maintaining a medical certificate from a licensed medical examiner.
5. Time limits: Some endorsements, such as the Passenger endorsement, may have time limits that require you to renew or retest after a certain period of time.
It's important to be aware of any restrictions or limitations that apply to your CDL Bus endorsement in Wisconsin. Violating these restrictions can result in fines, penalties, or even the suspension or revocation of your CDL license. If you have any questions about your specific situation, it's best to contact the Wisconsin Department of Transportation for guidance.
1. Passenger limits: Depending on the endorsement and the type of vehicle, there may be a limit on the number of passengers you can transport.
2. Endorsement-specific limitations: Some endorsements, such as the School Bus endorsement, may have additional limitations or requirements, such as background checks or specific training.
3. Hazmat restrictions: If you also hold a Hazardous Materials (H) endorsement, there may be additional restrictions on transporting hazardous materials.
4. Medical requirements: To maintain your CDL and any endorsements, you must meet certain medical requirements, such as obtaining and maintaining a medical certificate from a licensed medical examiner.
5. Time limits: Some endorsements, such as the Passenger endorsement, may have time limits that require you to renew or retest after a certain period of time.
It's important to be aware of any restrictions or limitations that apply to your CDL Bus endorsement in Wisconsin. Violating these restrictions can result in fines, penalties, or even the suspension or revocation of your CDL license. If you have any questions about your specific situation, it's best to contact the Wisconsin Department of Transportation for guidance.
