Knowledge Test Class A
This license is required for driving any legal combination of vehicles, with a gross combination weight rating of 26,001 pounds or more, provided the GVWR of a trailer exceeds 10,000 pounds. To receive this license, applicants must pass a 50-question test. Test questions come from the Georgia Commercial Driver’s Manual. To pass, applicants must answer 40 questions correctly. Questions come from chapters covering: Introduction, Driving Safely, Transporting Cargo Safely, Air Brakes (if applicable), Combination Vehicles, Pre-Trip Vehicle Inspection Test, Basic Vehicle Control Skills Test and On-Road Driving. Endorsements that may be used with a Class A CDL are: Hazardous materials, Tank, Passenger, Doubles/Triples, HazMat, Tank, Air Brakes and School bus.
Number of Question
Passing Score
1. When preparing to enter traffic, you should do all of the following, except:
Explanation
When crossing or entering traffic, bear in mind the size of your vehicle and the distance it will need to accelerate. Wait for a gap in traffic that is large enough to accommodate your vehicle before you begin to accelerate. Remember that you will need more room to accelerate if your vehicle is heavily loaded. Before crossing a road, be sure that you can get all the way across without interfering with traffic.
2. If the brakes “pull” to one side or the other when you use them, it's a sign that:
Explanation
If your vehicle "pulls" to one side when braking, you may have brake trouble. If there is an issue with your brakes, you should fix the issue before driving. Operating an unsafe vehicle is against federal and state laws.
3. If your vehicle is equipped with a cargo lift, you should ensure that:
Explanation
When checking a cargo lift as part of your vehicle inspection test, you should check for leaking, damaged, or missing parts. The lift must be fully retracted and latched securely.
4. During a basic vehicle control skills test, you may be asked to:
Explanation
Maneuvers that may be included in the basic vehicle control skills test include straight line backing, offset back/right parking, offset back/left parking, driver side parallel parking, conventional parallel parking, and alley docking.
5. A cardboard box on the roadway:
Explanation
Any foreign object on the road is potentially dangerous. For example, something seemingly harmless, such as a cardboard box or paper sack, could contain a hard or heavy object that could do serious damage to a vehicle.
6. Without engine oil:
Explanation
It is critical that the engine has adequate oil pressure. The engine can be rapidly destroyed if run without oil.
7. If the spring brakes are on, you should:
Explanation
You should not apply the brake pedal if the spring brakes are activated. The brakes could be damaged if they are subjected to the force of air pressure and the springs at the same time.
Ranked by best match
Frequently Asked Questions
A Class A CDL (Commercial Driver’s License) in Georgia allows an individual to operate a combination of vehicles with a weight of 26,001 pounds or more. This includes vehicles with a towed unit that weighs more than 10,000 pounds. Examples of vehicles that require a Class A CDL include tractor-trailers, truck and trailer combinations, and tanker vehicles.
To obtain a Class A CDL in Georgia, you must first obtain a commercial learner’s permit (CLP) and pass a skills test in a Class A vehicle. Additionally, you must pass the knowledge tests for both the general knowledge exam and the combination vehicles exam.
It is important to note that obtaining a Class A CDL in Georgia also requires meeting certain medical requirements and complying with federal and state regulations.
To obtain a Class A CDL in Georgia, you must first obtain a commercial learner’s permit (CLP) and pass a skills test in a Class A vehicle. Additionally, you must pass the knowledge tests for both the general knowledge exam and the combination vehicles exam.
It is important to note that obtaining a Class A CDL in Georgia also requires meeting certain medical requirements and complying with federal and state regulations.
With a Class A CDL license in Georgia, you can operate combination vehicles with a weight of 26,001 pounds or more. This includes vehicles with a towed unit that weighs more than 10,000 pounds. Examples of vehicles that require a Class A CDL include tractor-trailers, truck and trailer combinations, and tanker vehicles.
Some specific examples of vehicles you could operate with a Class A CDL in Georgia include:
- Tractor-trailers: These are vehicles with a front cab where the driver sits and controls the vehicle, and a trailer that is attached to the back of the cab. These can be used to transport goods over long distances.
- Double or triple trailers: These are combination vehicles that consist of two or three trailers connected to one another. They are commonly used in the transportation of goods across long distances.
- Tanker trucks: These are vehicles used to transport liquids or gases, such as oil or gasoline.
- Livestock carriers: These are vehicles designed to transport livestock, such as cattle or pigs.
It's important to note that there may be additional endorsements or restrictions required for certain types of vehicles or cargo.
Some specific examples of vehicles you could operate with a Class A CDL in Georgia include:
- Tractor-trailers: These are vehicles with a front cab where the driver sits and controls the vehicle, and a trailer that is attached to the back of the cab. These can be used to transport goods over long distances.
- Double or triple trailers: These are combination vehicles that consist of two or three trailers connected to one another. They are commonly used in the transportation of goods across long distances.
- Tanker trucks: These are vehicles used to transport liquids or gases, such as oil or gasoline.
- Livestock carriers: These are vehicles designed to transport livestock, such as cattle or pigs.
It's important to note that there may be additional endorsements or restrictions required for certain types of vehicles or cargo.
In order to obtain a Class A CDL license in Georgia, you must meet the following requirements:
1. Meet the age requirements: You must be at least 18 years old to obtain a Class A CDL license in Georgia. However, if you are going to transport hazardous materials or operate across state lines, you must be at least 21 years old.
2. Obtain a commercial learner's permit (CLP): Before you can obtain a Class A CDL license, you must first obtain a commercial learner's permit (CLP). To obtain a CLP, you must pass a written knowledge test for the general knowledge exam and any applicable endorsements (such as air brakes or hazardous materials).
3. Meet the medical requirements: You must pass a medical examination and obtain a medical certificate from a certified medical examiner.
4. Complete driver training: You are not required to complete driver training before obtaining a Class A CDL license in Georgia. However, it is highly recommended that you undergo training from an approved driving school or program.
5. Pass the skills test: To obtain your Class A CDL license, you must pass a skills test in a vehicle that falls under the Class A category. This test will include pre-trip inspection, basic vehicle control, and on-road driving.
6. Pay the necessary fees: There are fees associated with obtaining your CLP and your Class A CDL license in Georgia. The fees vary depending on the type of license and endorsements you are seeking.
It's important to note that there may be additional requirements or restrictions based on your specific situation or the type of cargo you will be transporting.
1. Meet the age requirements: You must be at least 18 years old to obtain a Class A CDL license in Georgia. However, if you are going to transport hazardous materials or operate across state lines, you must be at least 21 years old.
2. Obtain a commercial learner's permit (CLP): Before you can obtain a Class A CDL license, you must first obtain a commercial learner's permit (CLP). To obtain a CLP, you must pass a written knowledge test for the general knowledge exam and any applicable endorsements (such as air brakes or hazardous materials).
3. Meet the medical requirements: You must pass a medical examination and obtain a medical certificate from a certified medical examiner.
4. Complete driver training: You are not required to complete driver training before obtaining a Class A CDL license in Georgia. However, it is highly recommended that you undergo training from an approved driving school or program.
5. Pass the skills test: To obtain your Class A CDL license, you must pass a skills test in a vehicle that falls under the Class A category. This test will include pre-trip inspection, basic vehicle control, and on-road driving.
6. Pay the necessary fees: There are fees associated with obtaining your CLP and your Class A CDL license in Georgia. The fees vary depending on the type of license and endorsements you are seeking.
It's important to note that there may be additional requirements or restrictions based on your specific situation or the type of cargo you will be transporting.
The minimum age requirement to obtain a Class A CDL license in Georgia is 18 years old. However, drivers who are 18-20 years old will be restricted to operating commercial vehicles within the state of Georgia only. They are not allowed to operate commercial vehicles across state lines or transport hazardous materials.
If a driver is 21 years old or older, they may obtain a Class A CDL license without any age restrictions and may operate commercial vehicles across state lines and transport hazardous materials.
If a driver is 21 years old or older, they may obtain a Class A CDL license without any age restrictions and may operate commercial vehicles across state lines and transport hazardous materials.
Yes, you may need endorsements for a Class A CDL license depending on the type of vehicle you plan to operate or the cargo that you plan to transport. Here are some of the endorsements that you may need:
1. Combination Vehicle (required for all Class A CDL holders)
2. Double/Triple Trailer
3. Tanker
4. Hazardous Materials (HazMat)
5. Passenger
If you plan to operate a combination of vehicles with a total weight of 26,001 pounds or more, and the vehicle being towed has a weight of more than 10,000 pounds, you will be required to obtain the Combination Vehicle endorsement.
If you plan to transport hazardous materials, you will be required to obtain the HazMat endorsement in addition to passing a security threat assessment conducted by the Transportation Security Administration.
If you plan to transport passengers in a commercial vehicle, such as a bus, you will be required to obtain the Passenger endorsement.
It's important to note that each endorsement requires passing additional knowledge and skills tests beyond the general knowledge exam required for obtaining your Class A CDL license.
1. Combination Vehicle (required for all Class A CDL holders)
2. Double/Triple Trailer
3. Tanker
4. Hazardous Materials (HazMat)
5. Passenger
If you plan to operate a combination of vehicles with a total weight of 26,001 pounds or more, and the vehicle being towed has a weight of more than 10,000 pounds, you will be required to obtain the Combination Vehicle endorsement.
If you plan to transport hazardous materials, you will be required to obtain the HazMat endorsement in addition to passing a security threat assessment conducted by the Transportation Security Administration.
If you plan to transport passengers in a commercial vehicle, such as a bus, you will be required to obtain the Passenger endorsement.
It's important to note that each endorsement requires passing additional knowledge and skills tests beyond the general knowledge exam required for obtaining your Class A CDL license.
The Class A CDL skills test is a three-part test that consists of a pre-trip inspection, basic vehicle control, and a road test. Here is a breakdown of each part of the test:
1. Pre-Trip Inspection: The pre-trip inspection is designed to test your ability to check the vehicle to ensure that it is safe to operate. You will be asked to inspect the vehicle's basic systems, including the brakes, steering, suspension, tires, lights, and mirrors. You will need to explain to the examiner what you are checking and why.
2. Basic Vehicle Control: The basic vehicle control test is designed to test your ability to control the vehicle in tight spaces and at low speeds. You will be asked to perform maneuvers such as straight line backing, alley dock backing, and parallel parking.
3. Road Test: The road test is designed to evaluate your ability to safely operate the vehicle on public roads and highways. You will be asked to drive a predetermined route while demonstrating your ability to control the vehicle in traffic and obey traffic signals and signs.
It's important to note that each state may have specific requirements for the Class A CDL skills test, so be sure to check with your local DMV or licensing agency for details on what you need to know and practice before taking the exam.
1. Pre-Trip Inspection: The pre-trip inspection is designed to test your ability to check the vehicle to ensure that it is safe to operate. You will be asked to inspect the vehicle's basic systems, including the brakes, steering, suspension, tires, lights, and mirrors. You will need to explain to the examiner what you are checking and why.
2. Basic Vehicle Control: The basic vehicle control test is designed to test your ability to control the vehicle in tight spaces and at low speeds. You will be asked to perform maneuvers such as straight line backing, alley dock backing, and parallel parking.
3. Road Test: The road test is designed to evaluate your ability to safely operate the vehicle on public roads and highways. You will be asked to drive a predetermined route while demonstrating your ability to control the vehicle in traffic and obey traffic signals and signs.
It's important to note that each state may have specific requirements for the Class A CDL skills test, so be sure to check with your local DMV or licensing agency for details on what you need to know and practice before taking the exam.
Yes, there are some restrictions or limitations for drivers with a Class A CDL license. Here are some examples:
1. Age Restrictions: In most states, drivers must be at least 21 years old to operate a commercial vehicle across state lines or transport hazardous materials.
2. Endorsements: As mentioned earlier, a driver with a Class A CDL license may need additional endorsements to operate certain types of vehicles or transport certain types of cargo.
3. Training Requirements: Drivers with a Class A CDL license may be subject to additional training requirements, such as annual or biennial medical exams, periodic safety training, and drug and alcohol testing.
4. Vehicle Limitations: Some states may have vehicle weight limits or restrictions on the type of trailers that drivers with a Class A CDL can operate.
5. Hours of Service: Drivers with a Class A CDL license must adhere to federal and state hours-of-service regulations that limit the number of hours they can drive in a day and week.
It's important to note that restrictions and limitations vary by state, so be sure to check with your local DMV or licensing agency for specific rules and regulations in your area.
1. Age Restrictions: In most states, drivers must be at least 21 years old to operate a commercial vehicle across state lines or transport hazardous materials.
2. Endorsements: As mentioned earlier, a driver with a Class A CDL license may need additional endorsements to operate certain types of vehicles or transport certain types of cargo.
3. Training Requirements: Drivers with a Class A CDL license may be subject to additional training requirements, such as annual or biennial medical exams, periodic safety training, and drug and alcohol testing.
4. Vehicle Limitations: Some states may have vehicle weight limits or restrictions on the type of trailers that drivers with a Class A CDL can operate.
5. Hours of Service: Drivers with a Class A CDL license must adhere to federal and state hours-of-service regulations that limit the number of hours they can drive in a day and week.
It's important to note that restrictions and limitations vary by state, so be sure to check with your local DMV or licensing agency for specific rules and regulations in your area.
The rules and regulations for taking the Class A CDL written test in a language other than English can vary by state. However, in general, most states require that the test be taken in English. Some states may offer the test in other languages, but this is not always guaranteed.
If you are not fluent in English, it is important to check with your local DMV or licensing agency to see if any language assistance or translation services are available. Some states may allow you to bring an interpreter with you to translate the questions and answers for you. Other states may offer translations of the written test or allow you to take an audio version of the test.
It's important to note that even if you are allowed to take the written test in a language other than English, it is still important to learn and understand English for driving on US roads. Many road signs and communication with law enforcement will be in English, so being able to understand and communicate in English will be important for safe driving.
If you are not fluent in English, it is important to check with your local DMV or licensing agency to see if any language assistance or translation services are available. Some states may allow you to bring an interpreter with you to translate the questions and answers for you. Other states may offer translations of the written test or allow you to take an audio version of the test.
It's important to note that even if you are allowed to take the written test in a language other than English, it is still important to learn and understand English for driving on US roads. Many road signs and communication with law enforcement will be in English, so being able to understand and communicate in English will be important for safe driving.
Yes, you can request accommodations for the Class A CDL written test if you have a disability that impacts your ability to take the test under standard conditions. The Americans with Disabilities Act (ADA) requires that testing entities provide reasonable accommodations to individuals with disabilities to ensure that they have equal access to the testing process.
To request accommodations for the Class A CDL written test, you should contact your local DMV or licensing agency and provide documentation of your disability and how it impacts your ability to take the test. The documentation should come from a qualified professional, such as a doctor or psychologist, and should provide specific recommendations for accommodations that would be helpful for you.
Examples of accommodations that may be available include extended testing time, a separate testing room, a reader or scribe to assist with reading or writing, or specialized equipment such as a computer with assistive technology.
It is important to make your request for accommodations in advance of your scheduled testing date to allow time for the DMV or licensing agency to review your request and make necessary arrangements.
To request accommodations for the Class A CDL written test, you should contact your local DMV or licensing agency and provide documentation of your disability and how it impacts your ability to take the test. The documentation should come from a qualified professional, such as a doctor or psychologist, and should provide specific recommendations for accommodations that would be helpful for you.
Examples of accommodations that may be available include extended testing time, a separate testing room, a reader or scribe to assist with reading or writing, or specialized equipment such as a computer with assistive technology.
It is important to make your request for accommodations in advance of your scheduled testing date to allow time for the DMV or licensing agency to review your request and make necessary arrangements.
If you fail the Class A CDL written test, you will need to retake the test before you can obtain your commercial driver's license. The exact process for retaking the test can vary depending on the state, but in general, you will need to wait a designated amount of time before you can retake the test.
In most states, you will be required to pay a fee each time you take the written test. The fee may vary depending on the state and the number of times you have taken the test.
Before retaking the test, it is important to review and study the material covered on the test to improve your chances of passing. You may also want to consider taking a commercial driver training course to improve your knowledge and understanding of the rules and regulations.
It's important to note that there are limits on how many times you can take the written test. If you fail multiple times, you may be required to wait a certain amount of time or complete additional training before you can retake the test again. Check with your local DMV or licensing agency for specific guidelines and requirements for retaking the Class A CDL written test in your state.
In most states, you will be required to pay a fee each time you take the written test. The fee may vary depending on the state and the number of times you have taken the test.
Before retaking the test, it is important to review and study the material covered on the test to improve your chances of passing. You may also want to consider taking a commercial driver training course to improve your knowledge and understanding of the rules and regulations.
It's important to note that there are limits on how many times you can take the written test. If you fail multiple times, you may be required to wait a certain amount of time or complete additional training before you can retake the test again. Check with your local DMV or licensing agency for specific guidelines and requirements for retaking the Class A CDL written test in your state.
