Knowledge Test Class B
This license is required for driving a single vehicle with a GVWR of more than 26,001 pounds, and a trailer not to exceed 10,000 pounds gross vehicle weight rating, or a vehicle designed to transport 24 or more people (including the driver). To receive this license, applicants must pass a 50-question test. To pass, applicants must answer 40 questions correctly. Test questions come from the Georgia Commercial Driver’s Manual. Questions come from chapters covering: Introduction, Driving Safely, Transporting Cargo Safely, Air Brakes (if applicable), Pre-Trip Vehicle Inspection Test, Basic Vehicle Control Skills Test and On-Road Driving.. Endorsements that may be used with a Class B CDL are: Hazardous materials, Tank, Passenger, HazMat and Tank, Air Brakes and School bus.
43. To correct a drive-wheel braking skid, a driver should do all of the following, except:
To correct a drive-wheel braking skid, you should first remove your foot from the brake pedal to allow the locked wheels to begin rolling again. Quickly steer in the direction you want to go, then countersteer to prevent your vehicle from skidding in the opposite direction.
44. If your vehicle is equipped with a cargo lift, you should ensure that:
When checking a cargo lift as part of your vehicle inspection test, you should check for leaking, damaged, or missing parts. The lift must be fully retracted and latched securely.
45. When checking your vehicle's lights before driving:
To check your vehicle's lights before a trip, you should set the parking brake, turn off the engine, remove the key from the ignition, and take the key with you. Turn on your low beam headlights and four-way flashers. Get out of the vehicle to make sure the lights are working properly.
46. A one-way check valve:
A one-way check valve is required to be between an air compressor and the first main reservoir. This valve prevents air from escaping the system if the air compressor develops a leak.
47. What do headers do?
Front-end header boards protect the driver from the forward motion of their cargo in the event of a crash or emergency stop.
48. When approaching your vehicle, you should ensure that:
When approaching your vehicle before an inspection, make note of its general condition and ensure that it is not damaged or leaning. Look under the vehicle for fresh leaks. Check around the vehicle for hazards to movement, such as people, other vehicles, or low-hanging wires or tree limbs.
49. When taking the on-road driving test, you must do all of the following, except:
During the on-road driving test, you must drive in a safe and responsible manner; wear your safety belt; obey all traffic signs, signals, and laws; and complete the test without any accidents or moving violations.
50. When checking the power steering fluid during a vehicle inspection, you will need to do each of the following, except:
When checking the power steering fluid during the vehicle inspection test, you must be able to indicate where the power steering fluid dipstick is located and show that there is an adequate amount of power steering fluid in the engine compartment. The fluid level must be above the refill mark.
Ranked by best match
Frequently Asked Questions
Here are the steps to obtain a Class B CDL license in Georgia:
1. Obtain a Georgia Commercial Learner's Permit (CLP) by passing the General Knowledge test and any additional endorsement tests required for the type of vehicle you plan to operate.
2. Hold the CLP for at least 14 days before taking the Skills Test.
3. Schedule and pass the Skills Test, which includes Pre-Trip Inspection, Basic Vehicle Control, and On-Road Driving.
4. Once you pass the Skills Test, return to the Georgia DDS (Department of Driver Services) office to obtain your Class B CDL license.
5. You will need to bring proof of identity, residency, and legal presence in the United States, as well as any required medical certificates or endorsements for specific types of vehicles.
6. Pay the required fees and complete any additional paperwork.
Note that there may be additional requirements depending on your specific situation, such as age restrictions or previous driving history. It's important to thoroughly review all requirements before beginning the application process.
Some examples of vehicles you can operate with a Class B CDL license include:
- Straight trucks (such as delivery trucks and dump trucks) with a GVWR of 26,001 pounds or more
- Large buses, including school buses
- Segmented buses
- Box trucks with attached trailers or towed vehicles weighing less than 10,000 pounds
- Tractor-trailers where the trailer weighs less than 10,000 pounds
It's important to note that some types of vehicles may require additional endorsements on your CDL license, such as a passenger endorsement for driving buses. Make sure to check the specific requirements for the type of vehicle you plan to operate.
1. Be at least 18 years old for intrastate (within Georgia) operation or 21 years old for interstate (between states) operation.
2. Hold a valid Georgia driver's license.
3. Provide proof of your identity, residency, and legal presence in the United States.
4. Pass a medical examination and obtain a medical certificate from a certified medical examiner. The medical certificate must be valid for at least two years unless you have certain medical conditions that require more frequent exams.
5. Obtain a Georgia Commercial Learner's Permit (CLP) by passing the General Knowledge test and any additional endorsement tests required for the type of vehicle you plan to operate.
6. Hold the CLP for at least 14 days before taking the Skills Test.
7. Schedule and pass the Skills Test, which includes Pre-Trip Inspection, Basic Vehicle Control, and On-Road Driving.
8. Return to the Georgia DDS (Department of Driver Services) office to obtain your Class B CDL license.
9. Pay the required fees and complete any additional paperwork.
Note that there may be additional requirements depending on your specific situation, such as age restrictions or previous driving history. It's important to thoroughly review all requirements before beginning the application process.
It's important to note that some employers may have their own minimum age requirements for certain driving positions, so it's always a good idea to check with potential employers to see if they have any additional age restrictions.
1. Passenger endorsement (P) - Required for drivers who will be operating vehicles designed to transport 16 or more passengers, such as buses or vans.
2. School bus endorsement (S) - Required for drivers who will be operating school buses.
3. Tanker endorsement (N) - Required for drivers who will be transporting liquids or gases in tanks.
4. Hazardous materials endorsement (H) - Required for drivers who will be transporting hazardous materials.
5. Combination tanker and hazardous materials endorsement (X) - Required for drivers who will be transporting both hazardous materials and liquids or gases in tanks.
If you plan to operate a Class B vehicle for personal use only, such as a recreational vehicle or a non-commercial truck, you may not need any endorsements. However, it's always a good idea to check with the Georgia DDS (Department of Driver Services) to confirm the requirements for your specific situation.
1. Pre-trip inspection: The pre-trip inspection is a thorough check of the vehicle to ensure that it is safe to operate. You will be asked to identify and explain the function of various parts and systems on the vehicle, such as brakes, tires, lights, and mirrors.
2. Basic vehicle control skills: In this part of the test, you will demonstrate your ability to control the vehicle in various situations, such as backing up, turning, and maneuvering through tight spaces. You will be evaluated on your ability to use proper techniques, such as checking mirrors and using signals.
3. On-road driving: During the on-road driving portion of the test, you will demonstrate your ability to safely operate the vehicle in real-world traffic situations. You will be evaluated on your ability to follow traffic laws and signals, observe traffic conditions, use proper techniques for merging and changing lanes, and navigate intersections.
It's important to note that the Class B CDL skills test is a performance-based evaluation, meaning that you will be evaluated on your ability to perform each skill correctly and safely. To pass the test, you must demonstrate proficiency in all three parts of the test.
1. Vehicle weight: Drivers with a Class B CDL license may only operate vehicles with a gross vehicle weight rating (GVWR) of 26,001 pounds or more.
2. Number of passengers: Drivers with a Class B CDL license may not transport more than 16 passengers (including the driver) in a single vehicle.
3. Type of cargo: Depending on the type of cargo being transported, drivers may need to obtain additional endorsements or certifications. For example, drivers transporting hazardous materials are required to have a hazardous materials endorsement.
4. Time of day: Drivers under the age of 21 may not operate commercial vehicles between the hours of 12:00 am and 5:00 am.
5. Alcohol and drug use: Drivers are subject to strict alcohol and drug use regulations, including random testing and restrictions on operating a vehicle under the influence.
It's important for drivers with a Class B CDL license to be aware of these restrictions and limitations and to ensure that they are in compliance with all applicable rules and regulations.
However, it's important to note that the on-road driving test is only offered in English, so it's important for non-English speakers to have a good understanding of English when it comes to driving on the road.
If you need assistance with a language other than English, you can request an interpreter when you schedule your CDL exam. The interpreter must be fluent in both English and the language you are most comfortable with.
It's important to note that all drivers must be able to read and understand road signs and signals in English in order to obtain a CDL license. Additionally, some endorsements or certifications may require passing additional tests in English.
To request accommodations for the CDL written test, you must complete and submit a Request for Accommodation form to the Georgia Department of Driver Services. The form is available on their website or can be obtained at a local DDS office.
You must provide documentation of your disability and explain the type of accommodation you are requesting. The request will be reviewed by the DDS, and they will determine if the requested accommodation is appropriate and can be provided.
It's important to make your request for accommodations well in advance of your scheduled test date to allow time for review and approval. If you have any questions or need assistance with the process, you can contact the Georgia DDS for further guidance.
It's important to note that there is a fee for each attempt at the written test, so it's best to be prepared and study thoroughly before taking the test. The Georgia DDS offers study materials and practice tests on their website, as well as CDL training courses.
If you fail the written test multiple times, it may be helpful to seek additional assistance or training to improve your knowledge and understanding of the material. You can also speak with a DDS representative for guidance and advice on how to improve your chances of passing the written test on your next attempt.