Bus
This endorsement is required for driving a school bus. To receive this endorsement, applicants must pass a test. The test consists of 20 multiple choice questions. To pass, the applicant must answer at least 16 questions correctly. Each question has two, three or four possible answer choices. Test questions come from the Minnesota Commercial Driver’s Manual. Questions come from chapters covering: Safety, Passengers, School Buses, Cargo, Pre-Trip Vehicle Inspection Test, Basic Vehicle Control Skills Test and On-Road Driving. The School Bus endorsement can be used with the Class A, B or C CDL.
Number of Question
Passing Score
1. When checking the exhaust system, it should be:
Explanation
When checking the exhaust system, you should verify that no parts of the system are loose, broken, or missing.
2. When traveling down a hill, you can reduce the amount of required braking by:
Explanation
Before starting down a hill, decelerate and shift down into a gear that will allow you to control your vehicle without braking too hard. Using too much brake when driving downhill can cause the brakes to overheat, reducing the braking power.
3. A broken exhaust system can:
Explanation
Defects in an exhaust system are very dangerous because they can cause poisonous fumes to enter the cab or sleeper berth.
4. If you are confronted by an aggressive driver, you should:
Explanation
If confronted by an aggressive driver, the most important thing for you to do is get out of their way. Avoid making eye contact, do not challenge them by increasing your speed, and do not let yourself be provoked by any angry gestures they direct toward you.
5. After a tire has been changed, the driver should stop after a short distance to:
Explanation
After a tire has been changed, you should stop a short while later to re-check the tightness of the lug nuts.
6. When a tire goes flat, you may hear a loud bang. The truck will be affected:
Explanation
There may be a delay of a few seconds between the sound of a tire failing and the time that the vehicle is affected by the tire failure. Because of the short delay, a driver may initially believe that the sound came from another vehicle.
7. When backing with a trailer, turning toward the driver’s side is encouraged:
Explanation
If you must back up, it is safest to back toward the driver's side of the vehicle. This way, as the driver, you will have the best possible view of your path of travel.
Ranked by best match
Frequently Asked Questions
To obtain a CDL Bus endorsement in Minnesota, follow these steps:
1. Obtain a Minnesota Commercial Driver's License (CDL) by passing the knowledge and skills tests required for the type of CDL you need.
2. Complete a Minnesota CDL Bus endorsement application form (available online or at the testing location).
3. Study the Minnesota Commercial Driver's Manual and take the CDL Bus endorsement knowledge test at a Minnesota Department of Public Safety Driver and Vehicle Services (DVS) exam station.
4. Once you pass the knowledge test, you will need to obtain a Commercial Learner's Permit (CLP) before you can practice driving a bus with a qualified CDL holder.
5. Practice driving a bus with your CLP holder and prepare for the CDL Bus endorsement skills test.
6. Schedule an appointment for the CDL Bus endorsement skills test at a DVS exam station.
7. Pass the CDL Bus endorsement skills test, which will include a pre-trip inspection, basic control skills, and an on-road driving test.
8. Pay the required endorsement fee and receive your new Minnesota CDL with Bus endorsement.
Note: The requirements and fees for obtaining a CDL Bus endorsement may vary based on your specific situation, so it's important to check with the Minnesota DVS for current information and requirements.
1. Obtain a Minnesota Commercial Driver's License (CDL) by passing the knowledge and skills tests required for the type of CDL you need.
2. Complete a Minnesota CDL Bus endorsement application form (available online or at the testing location).
3. Study the Minnesota Commercial Driver's Manual and take the CDL Bus endorsement knowledge test at a Minnesota Department of Public Safety Driver and Vehicle Services (DVS) exam station.
4. Once you pass the knowledge test, you will need to obtain a Commercial Learner's Permit (CLP) before you can practice driving a bus with a qualified CDL holder.
5. Practice driving a bus with your CLP holder and prepare for the CDL Bus endorsement skills test.
6. Schedule an appointment for the CDL Bus endorsement skills test at a DVS exam station.
7. Pass the CDL Bus endorsement skills test, which will include a pre-trip inspection, basic control skills, and an on-road driving test.
8. Pay the required endorsement fee and receive your new Minnesota CDL with Bus endorsement.
Note: The requirements and fees for obtaining a CDL Bus endorsement may vary based on your specific situation, so it's important to check with the Minnesota DVS for current information and requirements.
To get a CDL Bus license in Minnesota, you must meet the following requirements:
1. Meet the age requirements:
- 18 years old for intrastate (within Minnesota) operation.
- 21 years old for interstate (between states) operation.
2. Hold a valid Minnesota driver's license.
3. Have a clean driving record with no disqualifying criminal convictions.
4. Pass a Department of Transportation (DOT) physical exam and obtain a Medical Examiner's Certificate.
5. Obtain a Commercial Learner's Permit (CLP) by passing the general knowledge test and any applicable endorsement knowledge tests (such as the Passenger or School Bus endorsement).
6. Complete behind-the-wheel training and practice with a qualified CDL holder.
7. Pass the CDL skills test, which includes a pre-trip inspection, basic control skills, and an on-road driving test.
8. Submit to a background check and fingerprinting.
9. Pay the required fees for your CDL Bus license.
Note: Additional requirements may apply based on your specific situation, such as if you have a prior CDL suspension or revocation, or if you are an out-of-state transfer applicant. It's important to check with the Minnesota Department of Public Safety Driver and Vehicle Services (DVS) for current information and requirements.
1. Meet the age requirements:
- 18 years old for intrastate (within Minnesota) operation.
- 21 years old for interstate (between states) operation.
2. Hold a valid Minnesota driver's license.
3. Have a clean driving record with no disqualifying criminal convictions.
4. Pass a Department of Transportation (DOT) physical exam and obtain a Medical Examiner's Certificate.
5. Obtain a Commercial Learner's Permit (CLP) by passing the general knowledge test and any applicable endorsement knowledge tests (such as the Passenger or School Bus endorsement).
6. Complete behind-the-wheel training and practice with a qualified CDL holder.
7. Pass the CDL skills test, which includes a pre-trip inspection, basic control skills, and an on-road driving test.
8. Submit to a background check and fingerprinting.
9. Pay the required fees for your CDL Bus license.
Note: Additional requirements may apply based on your specific situation, such as if you have a prior CDL suspension or revocation, or if you are an out-of-state transfer applicant. It's important to check with the Minnesota Department of Public Safety Driver and Vehicle Services (DVS) for current information and requirements.
Yes, you do need specific training and experience to obtain a CDL Bus endorsement in Minnesota.
First, you must obtain a Commercial Driver's License (CDL) by passing the knowledge and skills tests required for the type of CDL you need. This includes passing a general knowledge test, as well as any applicable endorsement knowledge tests (such as the Passenger or School Bus endorsement).
Once you have obtained your CDL, you must complete behind-the-wheel training and practice driving a bus with a qualified CDL holder before taking the CDL Bus endorsement skills test.
The Minnesota Department of Public Safety Driver and Vehicle Services (DVS) recommends that you obtain at least 40 hours of behind-the-wheel training in a bus, including at least 10 hours of actual driving time. This training should cover topics such as:
- Pre-trip inspection
- Basic control skills
- On-road driving
- Loading and unloading passengers
- Emergency procedures
Additionally, some bus companies or training schools may require additional training or experience beyond what is required by the state. It's important to check with your employer or training provider for specific requirements.
First, you must obtain a Commercial Driver's License (CDL) by passing the knowledge and skills tests required for the type of CDL you need. This includes passing a general knowledge test, as well as any applicable endorsement knowledge tests (such as the Passenger or School Bus endorsement).
Once you have obtained your CDL, you must complete behind-the-wheel training and practice driving a bus with a qualified CDL holder before taking the CDL Bus endorsement skills test.
The Minnesota Department of Public Safety Driver and Vehicle Services (DVS) recommends that you obtain at least 40 hours of behind-the-wheel training in a bus, including at least 10 hours of actual driving time. This training should cover topics such as:
- Pre-trip inspection
- Basic control skills
- On-road driving
- Loading and unloading passengers
- Emergency procedures
Additionally, some bus companies or training schools may require additional training or experience beyond what is required by the state. It's important to check with your employer or training provider for specific requirements.
Yes, there are different classes and types of CDL Bus licenses in Minnesota, depending on the size and type of bus you will be driving.
The three classes of CDLs are:
1. Class A: Allows you to operate a combination of vehicles with a gross combination weight rating (GCWR) of 26,001 pounds or more, provided that the vehicle being towed weighs more than 10,000 pounds.
2. Class B: Allows you to operate a single vehicle with a GVWR of 26,001 pounds or more, or a combination of vehicles with a GVWR of less than 26,001 pounds, but with a vehicle being towed that weighs less than 10,000 pounds.
3. Class C: Allows you to operate single or combination vehicles that do not meet the criteria for Class A or B, but that are designed to transport 16 or more passengers (including the driver) or hazardous materials.
In addition to the class of license, there are also different types of endorsements that may be required for certain types of bus driving. The most common endorsements for CDL Bus drivers are:
1. Passenger endorsement: Required for drivers of vehicles designed to transport 16 or more passengers (including the driver).
2. School Bus endorsement: Required for drivers of school buses designed to transport students.
3. Hazardous Materials (HazMat) endorsement: Required for drivers who transport hazardous materials in certain quantities.
4. Tanker endorsement: Required for drivers who transport liquids or gases in bulk containers.
It's important to carefully review the requirements for your specific situation and ensure that you obtain the appropriate class and endorsements for the type of bus driving you will be doing.
The three classes of CDLs are:
1. Class A: Allows you to operate a combination of vehicles with a gross combination weight rating (GCWR) of 26,001 pounds or more, provided that the vehicle being towed weighs more than 10,000 pounds.
2. Class B: Allows you to operate a single vehicle with a GVWR of 26,001 pounds or more, or a combination of vehicles with a GVWR of less than 26,001 pounds, but with a vehicle being towed that weighs less than 10,000 pounds.
3. Class C: Allows you to operate single or combination vehicles that do not meet the criteria for Class A or B, but that are designed to transport 16 or more passengers (including the driver) or hazardous materials.
In addition to the class of license, there are also different types of endorsements that may be required for certain types of bus driving. The most common endorsements for CDL Bus drivers are:
1. Passenger endorsement: Required for drivers of vehicles designed to transport 16 or more passengers (including the driver).
2. School Bus endorsement: Required for drivers of school buses designed to transport students.
3. Hazardous Materials (HazMat) endorsement: Required for drivers who transport hazardous materials in certain quantities.
4. Tanker endorsement: Required for drivers who transport liquids or gases in bulk containers.
It's important to carefully review the requirements for your specific situation and ensure that you obtain the appropriate class and endorsements for the type of bus driving you will be doing.
No, you cannot use your personal vehicle for the CDL Bus driving test in Minnesota.
The Minnesota Department of Public Safety Driver and Vehicle Services (DVS) requires that you use a vehicle that meets the requirements for the specific type of CDL test you are taking. This means that if you are taking the CDL Bus driving test, you must use a bus that meets the requirements for the class and endorsement(s) you are testing for.
The bus used for the driving test must be provided by a third-party tester or by the training school where you completed your behind-the-wheel training. It must also be in safe and operable condition, with all required equipment and features (such as mirrors, brakes, lights, etc.) in working order.
Additionally, before taking the CDL Bus driving test, you will need to complete a pre-trip inspection of the bus to ensure that it is safe to operate. This inspection includes checking various parts of the bus such as brakes, tires, lights, and emergency exits.
The Minnesota Department of Public Safety Driver and Vehicle Services (DVS) requires that you use a vehicle that meets the requirements for the specific type of CDL test you are taking. This means that if you are taking the CDL Bus driving test, you must use a bus that meets the requirements for the class and endorsement(s) you are testing for.
The bus used for the driving test must be provided by a third-party tester or by the training school where you completed your behind-the-wheel training. It must also be in safe and operable condition, with all required equipment and features (such as mirrors, brakes, lights, etc.) in working order.
Additionally, before taking the CDL Bus driving test, you will need to complete a pre-trip inspection of the bus to ensure that it is safe to operate. This inspection includes checking various parts of the bus such as brakes, tires, lights, and emergency exits.
Yes, during the CDL Bus driving test in Minnesota, you will need to demonstrate a variety of driving skills and maneuvers. The test is divided into three parts: the pre-trip inspection, basic vehicle control skills test, and the on-road driving test.
During the basic vehicle control skills test, you will need to demonstrate your ability to maneuver the bus through a series of tight spaces and obstacles. This portion of the test is conducted in a controlled environment, such as a closed course or parking lot. You will be evaluated on your ability to perform maneuvers such as:
1. Straight line backing
2. Offset backing
3. Parallel parking
4. Alley docking
During the on-road driving test, you will need to demonstrate your ability to safely operate the bus on public roads and highways. You will be evaluated on your ability to perform tasks such as:
1. Starting, stopping, and shifting smoothly
2. Turning left and right
3. Merging onto highways
4. Changing lanes
5. Maintaining safe following distances
6. Responding appropriately to traffic signals and signs
7. Demonstrating safe driving practices
It's important to practice these maneuvers and skills with a qualified instructor before taking the CDL Bus driving test. This will help you feel confident and prepared for the test, which will increase your chances of passing on your first attempt.
During the basic vehicle control skills test, you will need to demonstrate your ability to maneuver the bus through a series of tight spaces and obstacles. This portion of the test is conducted in a controlled environment, such as a closed course or parking lot. You will be evaluated on your ability to perform maneuvers such as:
1. Straight line backing
2. Offset backing
3. Parallel parking
4. Alley docking
During the on-road driving test, you will need to demonstrate your ability to safely operate the bus on public roads and highways. You will be evaluated on your ability to perform tasks such as:
1. Starting, stopping, and shifting smoothly
2. Turning left and right
3. Merging onto highways
4. Changing lanes
5. Maintaining safe following distances
6. Responding appropriately to traffic signals and signs
7. Demonstrating safe driving practices
It's important to practice these maneuvers and skills with a qualified instructor before taking the CDL Bus driving test. This will help you feel confident and prepared for the test, which will increase your chances of passing on your first attempt.
Yes, there are additional medical and physical requirements for a CDL Bus endorsement in Minnesota.
To obtain a CDL Bus endorsement, you must first have a valid Minnesota commercial driver's license (CDL) and meet the Federal Motor Carrier Safety Administration (FMCSA) medical qualifications. This includes passing a medical examination performed by a certified medical examiner and having a valid Medical Examiner's Certificate.
In addition to the medical examination, you must also meet certain physical requirements to operate a bus. These requirements include:
1. Good hearing - You must be able to hear a forced whisper in one ear at a distance of five feet or less, with or without the use of a hearing aid.
2. Good vision - You must have at least 20/40 vision with or without corrective lenses, and you must be able to distinguish between colors.
3. Adequate blood pressure - Your blood pressure must be below 160/100 to be eligible for a CDL Bus endorsement.
4. No respiratory issues - You cannot have any respiratory issues that could interfere with your ability to safely operate a bus.
5. No history of epilepsy or seizures - If you have epilepsy or seizures, you must be seizure-free for at least 10 years before you can obtain a CDL Bus endorsement.
It's important to note that these requirements are in place to ensure the safety of both the driver and passengers on the bus. If you have any concerns about your ability to meet these requirements, it's important to speak with your healthcare provider and/or a qualified CDL examiner before pursuing a CDL Bus endorsement.
To obtain a CDL Bus endorsement, you must first have a valid Minnesota commercial driver's license (CDL) and meet the Federal Motor Carrier Safety Administration (FMCSA) medical qualifications. This includes passing a medical examination performed by a certified medical examiner and having a valid Medical Examiner's Certificate.
In addition to the medical examination, you must also meet certain physical requirements to operate a bus. These requirements include:
1. Good hearing - You must be able to hear a forced whisper in one ear at a distance of five feet or less, with or without the use of a hearing aid.
2. Good vision - You must have at least 20/40 vision with or without corrective lenses, and you must be able to distinguish between colors.
3. Adequate blood pressure - Your blood pressure must be below 160/100 to be eligible for a CDL Bus endorsement.
4. No respiratory issues - You cannot have any respiratory issues that could interfere with your ability to safely operate a bus.
5. No history of epilepsy or seizures - If you have epilepsy or seizures, you must be seizure-free for at least 10 years before you can obtain a CDL Bus endorsement.
It's important to note that these requirements are in place to ensure the safety of both the driver and passengers on the bus. If you have any concerns about your ability to meet these requirements, it's important to speak with your healthcare provider and/or a qualified CDL examiner before pursuing a CDL Bus endorsement.
No, you cannot legally transport passengers without a valid CDL Bus endorsement in Minnesota.
Federal and state regulations require that drivers of commercial motor vehicles, including buses designed to transport 16 or more passengers, hold a valid CDL with the appropriate endorsements. This is to ensure that drivers have the skills and knowledge necessary to safely operate these vehicles and ensure the safety of passengers and other road users.
Driving a bus without the proper endorsement can result in serious consequences, including fines, license suspension or revocation, and even criminal charges in some cases. Additionally, operating a bus without the proper training and endorsements can put passengers at risk.
It is important to note that if you are driving a smaller-sized bus (less than 16 passengers), you may not need a CDL with a Bus endorsement. However, it is always recommended to check with your state's Department of Motor Vehicles or a qualified CDL instructor to determine the specific requirements for your situation.
Federal and state regulations require that drivers of commercial motor vehicles, including buses designed to transport 16 or more passengers, hold a valid CDL with the appropriate endorsements. This is to ensure that drivers have the skills and knowledge necessary to safely operate these vehicles and ensure the safety of passengers and other road users.
Driving a bus without the proper endorsement can result in serious consequences, including fines, license suspension or revocation, and even criminal charges in some cases. Additionally, operating a bus without the proper training and endorsements can put passengers at risk.
It is important to note that if you are driving a smaller-sized bus (less than 16 passengers), you may not need a CDL with a Bus endorsement. However, it is always recommended to check with your state's Department of Motor Vehicles or a qualified CDL instructor to determine the specific requirements for your situation.
You can add a CDL Bus endorsement to your existing CDL license by passing the required knowledge and skills tests and paying the appropriate fee.
To add a Bus endorsement to your CDL license, you must first pass the written knowledge test for the Bus endorsement. You can find study materials and practice tests on the Minnesota Department of Public Safety website or at a local DMV office. Once you have passed the written test, you must then pass the skills test in a bus that meets the requirements for the type of bus you will be driving.
After passing both tests, you can then apply for the Bus endorsement to be added to your CDL license. You will need to provide proof of passing both tests and pay the appropriate fee.
It is important to note that if your current CDL license is due for renewal, you can add the Bus endorsement at that time. However, if your license is not due for renewal, you may need to pay an additional fee to have the endorsement added outside of your regular renewal period.
If you are unsure about the process for adding a Bus endorsement to your CDL license, it is recommended that you contact your state's Department of Motor Vehicles or a qualified CDL instructor for guidance.
To add a Bus endorsement to your CDL license, you must first pass the written knowledge test for the Bus endorsement. You can find study materials and practice tests on the Minnesota Department of Public Safety website or at a local DMV office. Once you have passed the written test, you must then pass the skills test in a bus that meets the requirements for the type of bus you will be driving.
After passing both tests, you can then apply for the Bus endorsement to be added to your CDL license. You will need to provide proof of passing both tests and pay the appropriate fee.
It is important to note that if your current CDL license is due for renewal, you can add the Bus endorsement at that time. However, if your license is not due for renewal, you may need to pay an additional fee to have the endorsement added outside of your regular renewal period.
If you are unsure about the process for adding a Bus endorsement to your CDL license, it is recommended that you contact your state's Department of Motor Vehicles or a qualified CDL instructor for guidance.
Yes, there are restrictions and limitations for drivers with a CDL Bus endorsement in Minnesota.
One of the main restrictions for drivers with a CDL Bus endorsement is that they are only authorized to operate vehicles that fall under the "bus" category. This means that they cannot operate other types of commercial motor vehicles, such as large trucks or tanker vehicles, unless they hold the appropriate endorsements for those vehicles.
Additionally, drivers with a CDL Bus endorsement may be subject to specific regulations related to the size and weight of the bus they are operating. For example, drivers may be required to comply with weight limits and restrictions on certain roads or bridges.
In some cases, drivers may also be subject to specific regulations related to the transportation of passengers. For example, there may be rules regarding the maximum number of passengers that can be transported or requirements for securing equipment or luggage.
It is important for drivers with a CDL Bus endorsement to be aware of these restrictions and limitations and to comply with all applicable regulations to ensure their safety and the safety of their passengers. If you have any questions about the specific requirements for operating a bus in Minnesota, it is recommended that you contact your state's Department of Motor Vehicles or a qualified CDL instructor for guidance.
One of the main restrictions for drivers with a CDL Bus endorsement is that they are only authorized to operate vehicles that fall under the "bus" category. This means that they cannot operate other types of commercial motor vehicles, such as large trucks or tanker vehicles, unless they hold the appropriate endorsements for those vehicles.
Additionally, drivers with a CDL Bus endorsement may be subject to specific regulations related to the size and weight of the bus they are operating. For example, drivers may be required to comply with weight limits and restrictions on certain roads or bridges.
In some cases, drivers may also be subject to specific regulations related to the transportation of passengers. For example, there may be rules regarding the maximum number of passengers that can be transported or requirements for securing equipment or luggage.
It is important for drivers with a CDL Bus endorsement to be aware of these restrictions and limitations and to comply with all applicable regulations to ensure their safety and the safety of their passengers. If you have any questions about the specific requirements for operating a bus in Minnesota, it is recommended that you contact your state's Department of Motor Vehicles or a qualified CDL instructor for guidance.
