Double
This endorsement is required if the driver will pull two or three trailers. To receive this endorsement, applicants must pass a test. The test consists of 20 multiple choice questions. To pass, the applicant must answer at least 16 questions correctly. Each question has three or four possible answer choices. Test questions come from the Montana Commercial Driver License Manual. Questions come from chapters covering: Driving Safely, Air Brakes (if applicable), Combination Vehicles and Doubles and Triples. The Double/Triple endorsement can be used with the Class A CDL.
Number of Question
Passing Score
1. Before coupling, you can secure a second trailer by:
Explanation
If you are attaching a second trailer to a combination but you have doubts about the trailer's brakes, you should use wheel chocks to secure the trailer in place while coupling.
2. When parked on the side of the road, you should:
Explanation
Always turn on your four-way emergency flashers if you must park on the side of the road. This is especially important when traveling at night.
3. Accelerating roughly is:
Explanation
When accelerating, speed up smoothly and gradually so your vehicle does not jerk. Rough acceleration can cause mechanical damage.
4. When an engine is started:
Explanation
After a vehicle is started, the warning lights and buzzers should go out after a few seconds. If the warning signals do not turn off, there may be something wrong with the vehicle.
5. During an applied leakage test, the maximum leakage rate for a triple combination vehicle is ____ in a minute.
Explanation
It is important to know the maximum air loss rate that is safe for your specific vehicle. A triple combination should have a leakage rate no higher than 6 psi in a minute during an applied leakage test.
6. When driving a bobtail tractor, you should be aware that:
Explanation
Bobtail tractors are tractors that are not attached to any semitrailers. When operating a bobtail, you should be aware that stopping can be difficult and that it will take a longer distance to bring the bobtail to a complete stop than it would a tractor attached to a loaded semitrailer.
7. What is sleep debt?
Explanation
You can build up a "debt" of sleep if you do not sleep for adequate amounts of time. You can only catch up on the time that you "owe" by getting more sleep.
Ranked by best match
Frequently Asked Questions
To obtain a Doubles/Triples endorsement for a Commercial Driver's License (CDL) in Montana, you need to follow these steps:
1. Obtain a Montana CDL: You must have a Montana CDL or be applying for a Montana CDL.
2. Study the Montana CDL Driver Manual: You need to study the Montana CDL Driver Manual, which includes information about driving double and triple trailers.
3. Schedule an appointment at a Montana MVD: You need to schedule an appointment at a Montana Motor Vehicle Division (MVD) office that offers CDL testing.
4. Pass the Doubles/Triples knowledge test: You need to pass the Doubles/Triples knowledge test, which is a written exam that covers information about driving double and triple trailers.
5. Pass the Doubles/Triples skills test: Once you pass the knowledge test, you need to take and pass the Doubles/Triples skills test, which is a driving exam that tests your ability to safely operate double and triple trailers.
6. Pay the fee: You will need to pay a fee for the endorsement.
7. Receive your endorsement: Once you pass both tests and pay the fee, you will receive your Doubles/Triples endorsement on your Montana CDL.
It is important to note that you must already have your Montana CDL or be applying for it in order to obtain a Doubles/Triples endorsement.
1. Obtain a Montana CDL: You must have a Montana CDL or be applying for a Montana CDL.
2. Study the Montana CDL Driver Manual: You need to study the Montana CDL Driver Manual, which includes information about driving double and triple trailers.
3. Schedule an appointment at a Montana MVD: You need to schedule an appointment at a Montana Motor Vehicle Division (MVD) office that offers CDL testing.
4. Pass the Doubles/Triples knowledge test: You need to pass the Doubles/Triples knowledge test, which is a written exam that covers information about driving double and triple trailers.
5. Pass the Doubles/Triples skills test: Once you pass the knowledge test, you need to take and pass the Doubles/Triples skills test, which is a driving exam that tests your ability to safely operate double and triple trailers.
6. Pay the fee: You will need to pay a fee for the endorsement.
7. Receive your endorsement: Once you pass both tests and pay the fee, you will receive your Doubles/Triples endorsement on your Montana CDL.
It is important to note that you must already have your Montana CDL or be applying for it in order to obtain a Doubles/Triples endorsement.
To obtain a CDL Doubles/Triples license in Montana, you must meet the following requirements:
1. Age: You must be at least 18 years old to obtain a CDL Doubles/Triples license in Montana. However, you may only operate within the state of Montana and cannot transport hazardous materials.
2. Valid Montana CDL: You must have a valid Montana Commercial Driver's License (CDL) or be applying for a Montana CDL.
3. Clean driving record: You must have a clean driving record, meaning you have not been convicted of certain offenses or had your license suspended or revoked.
4. Pass the Doubles/Triples knowledge test: You must pass the Doubles/Triples knowledge test, which is a written exam that covers information about driving double and triple trailers.
5. Pass the Doubles/Triples skills test: You must pass the Doubles/Triples skills test, which is a driving exam that tests your ability to safely operate double and triple trailers.
6. Pay the fee: You will need to pay a fee for the endorsement.
It is important to note that if you want to operate double and triple trailers across state lines or transport hazardous materials, you must be at least 21 years old and meet additional requirements.
1. Age: You must be at least 18 years old to obtain a CDL Doubles/Triples license in Montana. However, you may only operate within the state of Montana and cannot transport hazardous materials.
2. Valid Montana CDL: You must have a valid Montana Commercial Driver's License (CDL) or be applying for a Montana CDL.
3. Clean driving record: You must have a clean driving record, meaning you have not been convicted of certain offenses or had your license suspended or revoked.
4. Pass the Doubles/Triples knowledge test: You must pass the Doubles/Triples knowledge test, which is a written exam that covers information about driving double and triple trailers.
5. Pass the Doubles/Triples skills test: You must pass the Doubles/Triples skills test, which is a driving exam that tests your ability to safely operate double and triple trailers.
6. Pay the fee: You will need to pay a fee for the endorsement.
It is important to note that if you want to operate double and triple trailers across state lines or transport hazardous materials, you must be at least 21 years old and meet additional requirements.
While you do not necessarily need any specific experience or training to obtain a CDL Doubles/Triples endorsement in Montana, it is highly recommended that you have experience operating commercial vehicles before attempting to operate double and triple trailers.
In addition, you may want to consider enrolling in a training program that specifically covers the operation of double and triple trailers. These programs can provide you with the knowledge and skills necessary to safely operate these types of vehicles. Some employers may also require or prefer that you have completed such a program.
It is also important to note that Montana requires all CDL holders to complete periodic training and evaluation on an ongoing basis to maintain their license, including the Doubles/Triples endorsement. This helps ensure that drivers continue to have the necessary skills and knowledge to safely operate these types of vehicles.
In addition, you may want to consider enrolling in a training program that specifically covers the operation of double and triple trailers. These programs can provide you with the knowledge and skills necessary to safely operate these types of vehicles. Some employers may also require or prefer that you have completed such a program.
It is also important to note that Montana requires all CDL holders to complete periodic training and evaluation on an ongoing basis to maintain their license, including the Doubles/Triples endorsement. This helps ensure that drivers continue to have the necessary skills and knowledge to safely operate these types of vehicles.
Yes, in addition to the standard Montana CDL written test, you will need to pass a written knowledge test specifically for the Doubles/Triples endorsement to obtain this endorsement. The Doubles/Triples endorsement test is designed to assess your knowledge of the additional safety considerations and driving techniques required when operating double and triple trailers.
The Doubles/Triples endorsement knowledge test covers topics such as:
1. Coupling and uncoupling double and triple trailers
2. Inspecting double and triple trailers
3. Driving double and triple trailers safely
4. Special restrictions for double and triple trailers
To pass the Doubles/Triples endorsement test, you must correctly answer a certain number of questions (usually 80% or higher, depending on the state). You may also be required to take a skills test to demonstrate your ability to safely operate double and triple trailers.
It is important to thoroughly study for the Doubles/Triples endorsement test by reviewing the Montana CDL manual and any additional study materials provided by your training program or employer.
The Doubles/Triples endorsement knowledge test covers topics such as:
1. Coupling and uncoupling double and triple trailers
2. Inspecting double and triple trailers
3. Driving double and triple trailers safely
4. Special restrictions for double and triple trailers
To pass the Doubles/Triples endorsement test, you must correctly answer a certain number of questions (usually 80% or higher, depending on the state). You may also be required to take a skills test to demonstrate your ability to safely operate double and triple trailers.
It is important to thoroughly study for the Doubles/Triples endorsement test by reviewing the Montana CDL manual and any additional study materials provided by your training program or employer.
The specific skills or maneuvers you will need to demonstrate during the CDL Doubles/Triples endorsement skills test in Montana will depend on the testing location and examiner. However, generally, you will need to demonstrate the following skills or maneuvers:
1. Pre-trip Inspection: You will be required to inspect the double or triple trailers for safety before driving and ensure that all components are in good working condition.
2. Coupling and Uncoupling: You will need to demonstrate your ability to properly couple and uncouple double or triple trailers, including attaching and detaching air lines and electrical connections.
3. Straight Line Backing: You will be required to back the double or triple trailers in a straight line for a specific distance.
4. Alley Docking: You may be asked to perform an alley docking maneuver, which involves backing a double or triple trailer into a tight space between two other vehicles or barriers.
5. Offset Backing: You may also be asked to perform an offset backing maneuver, which involves backing a double or triple trailer into a space at an angle.
6. Turning: You will be required to demonstrate your ability to safely turn with a double or triple trailer, including making wide turns and avoiding obstacles.
It is important to practice these maneuvers with a qualified instructor before taking the CDL Doubles/Triples endorsement skills test in Montana. The more practice you have, the better prepared you will be to pass the test and safely operate double and triple trailers on the road.
1. Pre-trip Inspection: You will be required to inspect the double or triple trailers for safety before driving and ensure that all components are in good working condition.
2. Coupling and Uncoupling: You will need to demonstrate your ability to properly couple and uncouple double or triple trailers, including attaching and detaching air lines and electrical connections.
3. Straight Line Backing: You will be required to back the double or triple trailers in a straight line for a specific distance.
4. Alley Docking: You may be asked to perform an alley docking maneuver, which involves backing a double or triple trailer into a tight space between two other vehicles or barriers.
5. Offset Backing: You may also be asked to perform an offset backing maneuver, which involves backing a double or triple trailer into a space at an angle.
6. Turning: You will be required to demonstrate your ability to safely turn with a double or triple trailer, including making wide turns and avoiding obstacles.
It is important to practice these maneuvers with a qualified instructor before taking the CDL Doubles/Triples endorsement skills test in Montana. The more practice you have, the better prepared you will be to pass the test and safely operate double and triple trailers on the road.
No, you cannot legally operate double or triple trailers without a CDL Doubles/Triples endorsement in Montana. The Doubles/Triples endorsement is required by law for drivers who operate vehicles with multiple trailers.
To obtain a Doubles/Triples endorsement, you must pass a written knowledge test and a skills test that specifically assesses your ability to safely operate double or triple trailers. You must also hold a valid Montana commercial driver's license (CDL) with the appropriate class for the combination of vehicles you will be operating.
Operating double or triple trailers without the required endorsement can result in fines, penalties, and even the suspension or revocation of your commercial driver's license. It is important to always follow Montana's CDL laws and regulations to ensure your own safety and the safety of others on the road.
To obtain a Doubles/Triples endorsement, you must pass a written knowledge test and a skills test that specifically assesses your ability to safely operate double or triple trailers. You must also hold a valid Montana commercial driver's license (CDL) with the appropriate class for the combination of vehicles you will be operating.
Operating double or triple trailers without the required endorsement can result in fines, penalties, and even the suspension or revocation of your commercial driver's license. It is important to always follow Montana's CDL laws and regulations to ensure your own safety and the safety of others on the road.
You can add the CDL Doubles/Triples endorsement to your existing CDL license in Montana. To do this, you will need to pass the Doubles/Triples endorsement written knowledge test and skills test, and pay the required fees.
To take the written knowledge test, you can visit a Montana Motor Vehicle Division (MVD) driver's licensing office and complete an application for a CDL Doubles/Triples endorsement. You will need to provide your current CDL license and pass the written test with a score of at least 80%.
Once you have passed the written knowledge test, you can schedule an appointment to take the Doubles/Triples endorsement skills test. You will need to provide your own vehicle combination for the skills test, including a tractor-trailer with two or three trailers attached.
If you successfully pass both the written knowledge test and skills test, the MVD will add the Doubles/Triples endorsement to your existing CDL license. You will receive a new license with the updated endorsement information.
It is important to note that adding a Doubles/Triples endorsement may also require additional medical certifications or endorsements, depending on your specific situation. Be sure to check with the Montana MVD for any additional requirements before applying for the endorsement.
To take the written knowledge test, you can visit a Montana Motor Vehicle Division (MVD) driver's licensing office and complete an application for a CDL Doubles/Triples endorsement. You will need to provide your current CDL license and pass the written test with a score of at least 80%.
Once you have passed the written knowledge test, you can schedule an appointment to take the Doubles/Triples endorsement skills test. You will need to provide your own vehicle combination for the skills test, including a tractor-trailer with two or three trailers attached.
If you successfully pass both the written knowledge test and skills test, the MVD will add the Doubles/Triples endorsement to your existing CDL license. You will receive a new license with the updated endorsement information.
It is important to note that adding a Doubles/Triples endorsement may also require additional medical certifications or endorsements, depending on your specific situation. Be sure to check with the Montana MVD for any additional requirements before applying for the endorsement.
Yes, there are some restrictions and limitations for drivers with a CDL Doubles/Triples endorsement in Montana. These restrictions are in place to ensure the safety of the driver, other motorists, and pedestrians.
Here are some of the main restrictions and limitations for drivers with a Doubles/Triples endorsement:
1. Length and weight restrictions: Montana law limits the length and weight of commercial vehicles that can be operated on state roads. Drivers with a Doubles/Triples endorsement must comply with these restrictions.
2. Specific routes: Some roads in Montana are not suitable for larger commercial vehicles, such as those with multiple trailers. Drivers with a Doubles/Triples endorsement must be aware of these restrictions and plan their routes accordingly.
3. Speed limits: Montana law sets specific speed limits for commercial vehicles based on their weight. Drivers with a Doubles/Triples endorsement must follow these speed limits.
4. Parking limitations: Commercial vehicles with multiple trailers may require more space to park than standard commercial vehicles. Drivers with a Doubles/Triples endorsement must be aware of any parking limitations or restrictions in Montana.
It is important for drivers with a Doubles/Triples endorsement to be aware of these restrictions and limitations to avoid fines, penalties, or accidents on the road. Additionally, it is important to regularly review Montana's CDL laws and regulations to stay up-to-date on any changes or updates that may affect your driving privileges.
Here are some of the main restrictions and limitations for drivers with a Doubles/Triples endorsement:
1. Length and weight restrictions: Montana law limits the length and weight of commercial vehicles that can be operated on state roads. Drivers with a Doubles/Triples endorsement must comply with these restrictions.
2. Specific routes: Some roads in Montana are not suitable for larger commercial vehicles, such as those with multiple trailers. Drivers with a Doubles/Triples endorsement must be aware of these restrictions and plan their routes accordingly.
3. Speed limits: Montana law sets specific speed limits for commercial vehicles based on their weight. Drivers with a Doubles/Triples endorsement must follow these speed limits.
4. Parking limitations: Commercial vehicles with multiple trailers may require more space to park than standard commercial vehicles. Drivers with a Doubles/Triples endorsement must be aware of any parking limitations or restrictions in Montana.
It is important for drivers with a Doubles/Triples endorsement to be aware of these restrictions and limitations to avoid fines, penalties, or accidents on the road. Additionally, it is important to regularly review Montana's CDL laws and regulations to stay up-to-date on any changes or updates that may affect your driving privileges.
In Montana, the maximum weight and length limits for double/triple trailers with a CDL Doubles/Triples endorsement are determined by federal and state regulations.
According to the Federal Motor Carrier Safety Administration (FMCSA), the maximum weight of a commercial vehicle with a double/triple trailer combination is 80,000 pounds. This weight limit includes the weight of the tractor, trailer(s), and cargo.
In addition to weight restrictions, Montana law also sets a maximum length limit for commercial vehicles with double/triple trailers. According to Montana law, the maximum length of a commercial vehicle with a double/triple trailer is 28 feet for each trailer, or a combined length of 85 feet.
It's important to note that these weight and length limits may vary depending on the type of cargo being transported, as well as any specific permits or exemptions granted by Montana authorities. Additionally, drivers with a CDL Doubles/Triples endorsement must also comply with other restrictions and limitations on Montana roads, such as speed limits and parking regulations.
According to the Federal Motor Carrier Safety Administration (FMCSA), the maximum weight of a commercial vehicle with a double/triple trailer combination is 80,000 pounds. This weight limit includes the weight of the tractor, trailer(s), and cargo.
In addition to weight restrictions, Montana law also sets a maximum length limit for commercial vehicles with double/triple trailers. According to Montana law, the maximum length of a commercial vehicle with a double/triple trailer is 28 feet for each trailer, or a combined length of 85 feet.
It's important to note that these weight and length limits may vary depending on the type of cargo being transported, as well as any specific permits or exemptions granted by Montana authorities. Additionally, drivers with a CDL Doubles/Triples endorsement must also comply with other restrictions and limitations on Montana roads, such as speed limits and parking regulations.
Yes, there are specific safety considerations and regulations for driving double/triple trailers with a CDL Doubles/Triples endorsement in Montana. These regulations are in place to ensure the safety of the driver, other motorists, and pedestrians.
Here are some of the main safety considerations and regulations for drivers with a Doubles/Triples endorsement:
1. Proper training: To obtain a CDL Doubles/Triples endorsement in Montana, drivers must undergo specialized training that covers the unique challenges of operating multiple trailers. This training includes topics such as coupling and uncoupling trailers, turning and backing up with multiple trailers, and emergency procedures.
2. Pre-trip inspections: Before operating a commercial vehicle with double/triple trailers, drivers must perform a thorough pre-trip inspection to ensure that the vehicle is in safe working condition. This includes checking the brakes, lights, tires, and other critical components.
3. Coupling and uncoupling: Properly coupling and uncoupling multiple trailers is critical for safe operation of commercial vehicles. Drivers with a Doubles/Triples endorsement must be trained to properly connect and disconnect trailers, including checking for proper alignment and securing connections.
4. Turning and backing up: Turning and backing up with double/triple trailers requires additional skill and caution due to the increased length and weight of the vehicle. Drivers must be trained to navigate tight turns and back up safely without striking other vehicles or objects.
5. Speed management: Due to the increased weight and length of commercial vehicles with double/triple trailers, it is important for drivers to manage their speed carefully to avoid accidents or loss of control.
It is essential that drivers with a Doubles/Triples endorsement follow these safety considerations and regulations when operating commercial vehicles on Montana roads. Failure to do so may result in fines, penalties, or even accidents that could cause injury or loss of life.
Here are some of the main safety considerations and regulations for drivers with a Doubles/Triples endorsement:
1. Proper training: To obtain a CDL Doubles/Triples endorsement in Montana, drivers must undergo specialized training that covers the unique challenges of operating multiple trailers. This training includes topics such as coupling and uncoupling trailers, turning and backing up with multiple trailers, and emergency procedures.
2. Pre-trip inspections: Before operating a commercial vehicle with double/triple trailers, drivers must perform a thorough pre-trip inspection to ensure that the vehicle is in safe working condition. This includes checking the brakes, lights, tires, and other critical components.
3. Coupling and uncoupling: Properly coupling and uncoupling multiple trailers is critical for safe operation of commercial vehicles. Drivers with a Doubles/Triples endorsement must be trained to properly connect and disconnect trailers, including checking for proper alignment and securing connections.
4. Turning and backing up: Turning and backing up with double/triple trailers requires additional skill and caution due to the increased length and weight of the vehicle. Drivers must be trained to navigate tight turns and back up safely without striking other vehicles or objects.
5. Speed management: Due to the increased weight and length of commercial vehicles with double/triple trailers, it is important for drivers to manage their speed carefully to avoid accidents or loss of control.
It is essential that drivers with a Doubles/Triples endorsement follow these safety considerations and regulations when operating commercial vehicles on Montana roads. Failure to do so may result in fines, penalties, or even accidents that could cause injury or loss of life.
