Tank
This endorsement is required to haul any liquid or gaseous materials in a tank or tanks having a capacity of 1,000 gallons or more that is either permanently or temporarily attached to the vehicle or chassis. To receive this endorsement, applicants must pass a test. The test consists of 20 multiple choice questions. Each question has four possible answer choices. To pass, the applicant must answer at least 16 questions correctly. Test questions come from the North Dakota Commercial Driver Guide. Questions come from chapters covering: Driving Safely, Transporting Cargo, Air Brakes, Tank Vehicles, Hazardous Materials and Combination Vehicles. The Tank endorsement can be used with the Class A, B or C CDL.
Number of Question
Passing Score
1. If something is found to be unsafe during a pre-trip inspection, you should:
Explanation
If a pre-trip inspection reveals anything unsafe about your vehicle, you must get it repaired. It is illegal to operate an unsafe vehicle.
2. Hydroplaning usually occurs:
Explanation
In places where water collects on the road, it is possible for a vehicle to hydroplane. Low tire pressure or worn tire tread makes this more likely to happen. If there is enough water on a road surface, hydroplaning can occur at speeds as low as 30 mph.
3. A fatigued driver:
Explanation
If you are fatigued, you will not see or react to hazards as quickly as you would if you were fully energized and awake. You will be impaired in making critical decisions.
4. When checking the exhaust system, it should be:
Explanation
When checking the exhaust system, you should verify that no parts of the system are loose, broken, or missing.
5. When approaching an active railroad crossing:
Explanation
At a railroad crossing, do not assume that you will hear an approaching train. Trains may be prohibited from sounding their horns in certain areas, or the sound of its horn may be covered by noise from your vehicle. Do not assume that warning lights or other signals will announce a train.
6. When a driver is not in their vehicle, hazardous materials' shipping papers should be:
Explanation
Shipping papers for hazardous materials should always be easily accessible. When a driver is not in their vehicle, hazardous materials' shipping papers should be left on the driver's seat.
7. What happens if brakes become too hot?
Explanation
If brakes are overused, they may overheat and stop working. This is referred to as brake fade.
Ranked by best match
Frequently Asked Questions
To obtain a CDL Tank endorsement in North Dakota, you will need to follow these steps:
1. Obtain a commercial learner's permit (CLP) - You must pass a written test and a vision screening to obtain a CLP.
2. Complete tank endorsement training - You must complete training from an approved training provider or employer, which includes classroom instruction and behind-the-wheel training.
3. Pass the Tank endorsement knowledge test - This test covers the knowledge necessary for operating a vehicle with a tank.
4. Pass the Tank endorsement skills test - This test will evaluate your ability to safely operate a vehicle with a tank.
5. Submit required documents - You will need to provide proof of identity and residency, as well as your CLP and any other necessary documents.
6. Pay the Tank endorsement fee - The fee for a Tank endorsement in North Dakota is $5.
Once you have completed all of these steps, you will receive your CDL with the Tank endorsement. It's important to note that you must renew your Tank endorsement every four years by passing the knowledge test.
1. Obtain a commercial learner's permit (CLP) - You must pass a written test and a vision screening to obtain a CLP.
2. Complete tank endorsement training - You must complete training from an approved training provider or employer, which includes classroom instruction and behind-the-wheel training.
3. Pass the Tank endorsement knowledge test - This test covers the knowledge necessary for operating a vehicle with a tank.
4. Pass the Tank endorsement skills test - This test will evaluate your ability to safely operate a vehicle with a tank.
5. Submit required documents - You will need to provide proof of identity and residency, as well as your CLP and any other necessary documents.
6. Pay the Tank endorsement fee - The fee for a Tank endorsement in North Dakota is $5.
Once you have completed all of these steps, you will receive your CDL with the Tank endorsement. It's important to note that you must renew your Tank endorsement every four years by passing the knowledge test.
To obtain a CDL Tank license in North Dakota, you must meet the following requirements:
1. Be at least 21 years of age - To operate a commercial vehicle across state lines or transport hazardous materials, you must be at least 21 years old.
2. Hold a valid North Dakota driver's license - You must hold a valid North Dakota driver's license or be eligible to obtain one.
3. Obtain a commercial learner's permit (CLP) - You must obtain a CLP by passing a written test and a vision screening.
4. Complete Tank endorsement training - You must complete training from an approved training provider or employer, which includes classroom instruction and behind-the-wheel training.
5. Pass the Tank endorsement knowledge test - This test covers the knowledge necessary for operating a vehicle with a tank.
6. Pass the Tank endorsement skills test - This test will evaluate your ability to safely operate a vehicle with a tank.
7. Meet medical requirements - You must meet the medical requirements set by the Federal Motor Carrier Safety Administration (FMCSA) to ensure that you are physically able to operate a commercial vehicle.
8. Provide required documentation - You will need to provide proof of identity and residency, as well as your CLP and any other necessary documents.
9. Pay the Tank endorsement fee - The fee for a Tank endorsement in North Dakota is $5.
Once you have met these requirements, you will be eligible to receive your CDL with the Tank endorsement.
1. Be at least 21 years of age - To operate a commercial vehicle across state lines or transport hazardous materials, you must be at least 21 years old.
2. Hold a valid North Dakota driver's license - You must hold a valid North Dakota driver's license or be eligible to obtain one.
3. Obtain a commercial learner's permit (CLP) - You must obtain a CLP by passing a written test and a vision screening.
4. Complete Tank endorsement training - You must complete training from an approved training provider or employer, which includes classroom instruction and behind-the-wheel training.
5. Pass the Tank endorsement knowledge test - This test covers the knowledge necessary for operating a vehicle with a tank.
6. Pass the Tank endorsement skills test - This test will evaluate your ability to safely operate a vehicle with a tank.
7. Meet medical requirements - You must meet the medical requirements set by the Federal Motor Carrier Safety Administration (FMCSA) to ensure that you are physically able to operate a commercial vehicle.
8. Provide required documentation - You will need to provide proof of identity and residency, as well as your CLP and any other necessary documents.
9. Pay the Tank endorsement fee - The fee for a Tank endorsement in North Dakota is $5.
Once you have met these requirements, you will be eligible to receive your CDL with the Tank endorsement.
Yes, you will need specific training and experience to obtain a CDL Tank endorsement in North Dakota.
First, you must have a valid commercial driver's license (CDL) or a commercial learner's permit (CLP) before you can obtain a Tank endorsement. Additionally, you must complete Tank endorsement training, which includes classroom instruction and behind-the-wheel training.
The training must cover topics specific to the operation of a vehicle with a tank, such as the proper loading and unloading of liquids and gases, the effects of liquid surge, and the importance of proper cargo distribution.
You can receive this training from an approved training provider or from your employer if they have a certified tank endorsement trainer.
After completing the training, you must pass both a Tank endorsement knowledge test and a Tank endorsement skills test to obtain your CDL with the Tank endorsement.
It's important to note that the FMCSA also requires drivers with a Tank endorsement to complete additional training every three years to maintain their certification.
First, you must have a valid commercial driver's license (CDL) or a commercial learner's permit (CLP) before you can obtain a Tank endorsement. Additionally, you must complete Tank endorsement training, which includes classroom instruction and behind-the-wheel training.
The training must cover topics specific to the operation of a vehicle with a tank, such as the proper loading and unloading of liquids and gases, the effects of liquid surge, and the importance of proper cargo distribution.
You can receive this training from an approved training provider or from your employer if they have a certified tank endorsement trainer.
After completing the training, you must pass both a Tank endorsement knowledge test and a Tank endorsement skills test to obtain your CDL with the Tank endorsement.
It's important to note that the FMCSA also requires drivers with a Tank endorsement to complete additional training every three years to maintain their certification.
Yes, in North Dakota, you will need to pass a Tank endorsement knowledge test to obtain a CDL Tank endorsement. This test covers the knowledge necessary for operating a vehicle with a tank. The test will cover topics such as:
1. Tank vehicle inspection
2. Safe driving practices for tank vehicles
3. Loading and unloading tank vehicles
4. Bulkhead and baffle requirements
5. Hazardous materials regulations
6. Emergency procedures
In addition to the Tank endorsement knowledge test, you will also need to pass the general knowledge test and any other necessary endorsement tests for the type of commercial vehicle you plan on driving.
It's important to note that studying and preparing for these tests is crucial for success, as they are designed to ensure that drivers have the knowledge necessary to safely operate commercial vehicles on the road.
1. Tank vehicle inspection
2. Safe driving practices for tank vehicles
3. Loading and unloading tank vehicles
4. Bulkhead and baffle requirements
5. Hazardous materials regulations
6. Emergency procedures
In addition to the Tank endorsement knowledge test, you will also need to pass the general knowledge test and any other necessary endorsement tests for the type of commercial vehicle you plan on driving.
It's important to note that studying and preparing for these tests is crucial for success, as they are designed to ensure that drivers have the knowledge necessary to safely operate commercial vehicles on the road.
The CDL Tank endorsement written test covers the knowledge and skills necessary to safely operate a commercial vehicle with a tank. In North Dakota, the test consists of 20 multiple-choice questions, and you must answer at least 16 questions correctly to pass.
Here are the topics that are covered in the Tank endorsement written test:
1. Tank vehicle inspection: This includes checking the tank for leaks, ensuring that all valves and hoses are secure, and making sure that the tank is properly labeled.
2. Safe driving practices for tank vehicles: This includes topics like controlling liquid surge, understanding how a full or partially filled tank affects handling and braking, and techniques for preventing rollovers.
3. Loading and unloading tank vehicles: This includes understanding how to safely load and unload liquids and gases, as well as how to properly secure the cargo.
4. Bulkhead and baffle requirements: This includes understanding the purpose of bulkheads and baffles in a tank vehicle, as well as how to properly maintain them.
5. Hazardous materials regulations: This includes understanding the regulations related to transporting hazardous materials in a tank vehicle, including placarding requirements.
6. Emergency procedures: This includes understanding what to do in case of an emergency, such as a leak or spill, as well as understanding how to use emergency equipment like fire extinguishers.
It's important to note that studying and preparing for this test is crucial for success, as it will ensure that you have the knowledge necessary to safely operate a commercial vehicle with a tank.
Here are the topics that are covered in the Tank endorsement written test:
1. Tank vehicle inspection: This includes checking the tank for leaks, ensuring that all valves and hoses are secure, and making sure that the tank is properly labeled.
2. Safe driving practices for tank vehicles: This includes topics like controlling liquid surge, understanding how a full or partially filled tank affects handling and braking, and techniques for preventing rollovers.
3. Loading and unloading tank vehicles: This includes understanding how to safely load and unload liquids and gases, as well as how to properly secure the cargo.
4. Bulkhead and baffle requirements: This includes understanding the purpose of bulkheads and baffles in a tank vehicle, as well as how to properly maintain them.
5. Hazardous materials regulations: This includes understanding the regulations related to transporting hazardous materials in a tank vehicle, including placarding requirements.
6. Emergency procedures: This includes understanding what to do in case of an emergency, such as a leak or spill, as well as understanding how to use emergency equipment like fire extinguishers.
It's important to note that studying and preparing for this test is crucial for success, as it will ensure that you have the knowledge necessary to safely operate a commercial vehicle with a tank.
No, in North Dakota, there is no additional skills or maneuvers test required to obtain a CDL Tank endorsement. However, it's important to note that you will need to demonstrate your ability to safely operate a commercial vehicle with a tank during your road test for your initial CDL license. This will include maneuvers such as backing up, turning, and parking the vehicle.
During the road test, the examiner will also be assessing your ability to safely handle the tank vehicle and cargo. This includes demonstrating proper control of liquid surge, understanding how a full or partially filled tank affects handling and braking, and techniques for preventing rollovers.
Additionally, you may be required to demonstrate knowledge of emergency procedures and how to use emergency equipment like fire extinguishers.
It's important to be thoroughly prepared for both the Tank endorsement written test and the road test by studying and practicing safe driving practices for tank vehicles. This will help ensure that you have the knowledge and skills necessary to pass both tests and safely operate a commercial vehicle with a tank.
During the road test, the examiner will also be assessing your ability to safely handle the tank vehicle and cargo. This includes demonstrating proper control of liquid surge, understanding how a full or partially filled tank affects handling and braking, and techniques for preventing rollovers.
Additionally, you may be required to demonstrate knowledge of emergency procedures and how to use emergency equipment like fire extinguishers.
It's important to be thoroughly prepared for both the Tank endorsement written test and the road test by studying and practicing safe driving practices for tank vehicles. This will help ensure that you have the knowledge and skills necessary to pass both tests and safely operate a commercial vehicle with a tank.
Yes, there are some restrictions or limitations for drivers with a CDL Tank endorsement in North Dakota. These restrictions are in place to ensure the safety of the driver, other motorists, and the environment.
One of the main restrictions for drivers with a CDL Tank endorsement is related to the transportation of hazardous materials. If you are transporting hazardous materials, you will need to comply with Department of Transportation (DOT) regulations, which include specific training and certification requirements.
In addition to this, drivers with a CDL Tank endorsement may also be subject to additional state-specific restrictions. For example, North Dakota requires drivers transporting flammable liquids or gases in a cargo tank to have a special permit.
It's important to be aware of any restrictions or limitations related to your CDL Tank endorsement and comply with all applicable regulations. Failure to do so could result in fines, suspension or revocation of your CDL license, and even criminal charges if safety is compromised.
One of the main restrictions for drivers with a CDL Tank endorsement is related to the transportation of hazardous materials. If you are transporting hazardous materials, you will need to comply with Department of Transportation (DOT) regulations, which include specific training and certification requirements.
In addition to this, drivers with a CDL Tank endorsement may also be subject to additional state-specific restrictions. For example, North Dakota requires drivers transporting flammable liquids or gases in a cargo tank to have a special permit.
It's important to be aware of any restrictions or limitations related to your CDL Tank endorsement and comply with all applicable regulations. Failure to do so could result in fines, suspension or revocation of your CDL license, and even criminal charges if safety is compromised.
It depends on the amount of material you are transporting and the type of vehicle you are driving. In general, if you are transporting hazardous materials in quantities that require placards, you will need a CDL with a Tank endorsement.
For example, if you are driving a vehicle with a cargo tank that has a capacity of 1,000 gallons or more, you will need a CDL with a Tank endorsement to transport any liquid or gas materials. This includes transport of materials such as gasoline, diesel fuel, propane, or other flammable or hazardous liquids or gases.
If you are transporting smaller quantities of hazardous materials that do not require placards, you may not need a CDL with a Tank endorsement. However, you will still need to comply with all applicable DOT regulations and have proper training and certifications.
It's important to note that the regulations related to the transportation of hazardous materials can be complex and vary depending on the type and quantity of material being transported. If you are unsure about whether you need a CDL Tank endorsement for your particular situation, it's best to consult with the North Dakota Department of Transportation or an experienced commercial driver training program.
For example, if you are driving a vehicle with a cargo tank that has a capacity of 1,000 gallons or more, you will need a CDL with a Tank endorsement to transport any liquid or gas materials. This includes transport of materials such as gasoline, diesel fuel, propane, or other flammable or hazardous liquids or gases.
If you are transporting smaller quantities of hazardous materials that do not require placards, you may not need a CDL with a Tank endorsement. However, you will still need to comply with all applicable DOT regulations and have proper training and certifications.
It's important to note that the regulations related to the transportation of hazardous materials can be complex and vary depending on the type and quantity of material being transported. If you are unsure about whether you need a CDL Tank endorsement for your particular situation, it's best to consult with the North Dakota Department of Transportation or an experienced commercial driver training program.
You can add a CDL Tank endorsement to your existing CDL license in North Dakota. To add the Tank endorsement, you will need to pass the Tanker Vehicles endorsement written test and complete a Tanker Vehicles skills test in a vehicle that requires a Tank endorsement.
To obtain the Tanker Vehicles endorsement, you will need to study the North Dakota CDL Manual and pass a written test at a North Dakota Department of Transportation (NDDOT) office. The written test will cover topics such as tanker vehicle safety, inspection, and proper loading and unloading procedures.
After passing the written test, you will need to schedule and pass a skills test in a vehicle that requires a Tank endorsement. The skills test will evaluate your ability to safely operate a tanker vehicle, including backing up, turning, and maneuvering.
Once you have successfully completed both the written and skills tests, you can apply for the Tanker Vehicles endorsement to be added to your existing CDL license. You will need to pay a fee for the endorsement and provide proof of your passing scores on the written and skills tests.
It's important to note that adding a Tanker Vehicles endorsement to your CDL license may also require additional training and certifications depending on the type of material you plan to transport. It's best to consult with the NDDOT or an experienced commercial driver training program for more information on specific requirements.
To obtain the Tanker Vehicles endorsement, you will need to study the North Dakota CDL Manual and pass a written test at a North Dakota Department of Transportation (NDDOT) office. The written test will cover topics such as tanker vehicle safety, inspection, and proper loading and unloading procedures.
After passing the written test, you will need to schedule and pass a skills test in a vehicle that requires a Tank endorsement. The skills test will evaluate your ability to safely operate a tanker vehicle, including backing up, turning, and maneuvering.
Once you have successfully completed both the written and skills tests, you can apply for the Tanker Vehicles endorsement to be added to your existing CDL license. You will need to pay a fee for the endorsement and provide proof of your passing scores on the written and skills tests.
It's important to note that adding a Tanker Vehicles endorsement to your CDL license may also require additional training and certifications depending on the type of material you plan to transport. It's best to consult with the NDDOT or an experienced commercial driver training program for more information on specific requirements.
Yes, there are specific requirements and regulations for handling hazardous materials with a CDL Tank endorsement. The federal government, through the Department of Transportation (DOT), regulates the transportation of hazardous materials to ensure public safety.
In addition to obtaining a CDL with a Tank endorsement, drivers who transport hazardous materials must also complete specialized training and obtain a Hazardous Materials (HazMat) endorsement that is added to their CDL. This training covers topics such as identifying hazardous materials, proper handling and loading procedures, and emergency response procedures.
There are also specific regulations related to the transportation of hazardous materials that drivers must comply with. For example, drivers must follow specific routes and adhere to strict driving and parking regulations. They must also display placards on their vehicles to indicate the type of hazardous material being transported.
Drivers who transport hazardous materials must also comply with specific safety requirements such as maintaining proper vehicle maintenance, using appropriate personal protective equipment (PPE), and following emergency response procedures in case of an accident or spill.
It's important for drivers with a CDL Tank endorsement who transport hazardous materials to stay up-to-date on DOT regulations and any changes in requirements related to the transportation of hazardous materials. This can be done by attending regular training sessions and staying informed through the DOT's website or other reliable industry resources.
In addition to obtaining a CDL with a Tank endorsement, drivers who transport hazardous materials must also complete specialized training and obtain a Hazardous Materials (HazMat) endorsement that is added to their CDL. This training covers topics such as identifying hazardous materials, proper handling and loading procedures, and emergency response procedures.
There are also specific regulations related to the transportation of hazardous materials that drivers must comply with. For example, drivers must follow specific routes and adhere to strict driving and parking regulations. They must also display placards on their vehicles to indicate the type of hazardous material being transported.
Drivers who transport hazardous materials must also comply with specific safety requirements such as maintaining proper vehicle maintenance, using appropriate personal protective equipment (PPE), and following emergency response procedures in case of an accident or spill.
It's important for drivers with a CDL Tank endorsement who transport hazardous materials to stay up-to-date on DOT regulations and any changes in requirements related to the transportation of hazardous materials. This can be done by attending regular training sessions and staying informed through the DOT's website or other reliable industry resources.
