Knowledge Test Class A
This license is required for driving any legal combination of vehicles, with a gross combination weight rating of 26,001 pounds or more, provided the GVWR of a trailer exceeds 10,000 pounds To receive this license, applicants must pass a 50-question test. To pass, applicants must answer 40 questions correctly. Each question has three possible answer choices. Test questions come from the Rhode Island Commercial Driver License Manual. Questions come from chapters covering: Introduction, Driving Safely, Transporting Cargo Safely, Air Brakes (if applicable), Combination, Doubles and Hazardous Materials. Endorsements that may be used with a Class A CDL are: Hazardous materials, Tank, Passenger, HazMat and Tank, Air Brakes and School bus.
Number of Question
Passing Score
8. Dual tires should:
Explanation
When inspecting a vehicle, you should verify that your dual tires do not come into contact with one another, or with any other part of the vehicle.
9. Wheels with welding repairs are:
Explanation
Wheels or rims that have had welding repairs are not safe for use. They should be replaced before the vehicle is taken on the road.
10. Shortly after a tire has been changed, you should:
Explanation
After a tire has been changed, you should stop a short while later to recheck the tightness of the lug nuts.
11. Blocking is used to:
Explanation
Blocking may be used on all sides of a piece of cargo to keep it from sliding while the vehicle is in motion.
12. Of the following, which is the most slippery surface?
Explanation
Ice becomes wet when the weather is just warm enough to melt the ice slightly. Wet ice is much more slippery than ice that is not wet.
13. When driving a truck requiring a CDL:
Explanation
You must be properly restrained by a safety belt at all times when driving a commercial motor vehicle.
14. When taking the basic vehicle control skills test, failing to exit your vehicle properly during any exercise will result in:
Explanation
When exiting your vehicle during the basic vehicle control skills test, you must face the vehicle and maintain three points of contact at all times. If your testing vehicle is a bus, you must maintain contact with the handrail. Exiting the vehicle incorrectly may result in automatic failure of the basic control skills test.
Ranked by best match
Frequently Asked Questions
A Class A CDL (Commercial Driver's License) in Rhode Island allows the driver to operate a combination of vehicles with a total weight of 26,001 pounds or more, provided that the weight of the vehicle being towed is more than 10,000 pounds. This license is required for drivers who operate tractor-trailers, tanker trucks, flatbed trucks, and other large commercial vehicles.
To obtain a Class A CDL in Rhode Island, the driver must first obtain a commercial learner's permit (CLP) by passing a written test and meeting other requirements. Once the driver has held the CLP for at least 14 days, they can take the skills test, which consists of a pre-trip inspection, basic control skills test, and road test.
The driver must also pass a medical examination and provide proof of residency and identity. Additionally, they must provide their driving history from all states where they have held a driver's license in the past 10 years.
It is important for drivers to be familiar with all Rhode Island traffic laws and regulations related to commercial driving before obtaining their Class A CDL.
To obtain a Class A CDL in Rhode Island, the driver must first obtain a commercial learner's permit (CLP) by passing a written test and meeting other requirements. Once the driver has held the CLP for at least 14 days, they can take the skills test, which consists of a pre-trip inspection, basic control skills test, and road test.
The driver must also pass a medical examination and provide proof of residency and identity. Additionally, they must provide their driving history from all states where they have held a driver's license in the past 10 years.
It is important for drivers to be familiar with all Rhode Island traffic laws and regulations related to commercial driving before obtaining their Class A CDL.
With a Class A CDL license in Rhode Island, you can operate combination vehicles with a total weight of 26,001 pounds or more, provided that the weight of the vehicle being towed is more than 10,000 pounds. This includes but is not limited to:
1. Tractor-trailers
2. Livestock carriers
3. Tanker trucks
4. Flatbed trucks
5. Double and triple trailers
6. Refrigerated trucks
It is important to note that drivers with a Class A CDL are also authorized to operate vehicles in Class B and Class C categories, which include buses and other commercial vehicles with lower weight ratings. However, drivers must obtain the appropriate endorsements for these types of vehicles before operating them commercially.
1. Tractor-trailers
2. Livestock carriers
3. Tanker trucks
4. Flatbed trucks
5. Double and triple trailers
6. Refrigerated trucks
It is important to note that drivers with a Class A CDL are also authorized to operate vehicles in Class B and Class C categories, which include buses and other commercial vehicles with lower weight ratings. However, drivers must obtain the appropriate endorsements for these types of vehicles before operating them commercially.
To obtain a Class A Commercial Driver's License (CDL) in Rhode Island, you must meet the following requirements:
1. Age: You must be at least 18 years old to obtain a CDL, but you will be restricted to intrastate operation only. If you want to operate across state lines, you must be at least 21 years old.
2. Valid driver's license: You must have a valid Rhode Island driver's license.
3. Medical certificate: You must pass a medical examination and obtain a valid medical certificate from an approved medical examiner.
4. Commercial Learner's Permit (CLP): You must obtain a CLP by passing a written knowledge test and paying the required fee. You must hold the CLP for at least 14 days before taking the CDL skills test.
5. Driving Record: You must provide your driving record from all states where you have held a driver's license in the past 10 years.
6. Skills test: You must pass a skills test consisting of a pre-trip inspection, basic control skills test, and road test.
7. Fees: You must pay the required fees for obtaining the CDL and any endorsements.
It is important to note that additional requirements may apply depending on your specific situation or the type of vehicle you plan to operate.
1. Age: You must be at least 18 years old to obtain a CDL, but you will be restricted to intrastate operation only. If you want to operate across state lines, you must be at least 21 years old.
2. Valid driver's license: You must have a valid Rhode Island driver's license.
3. Medical certificate: You must pass a medical examination and obtain a valid medical certificate from an approved medical examiner.
4. Commercial Learner's Permit (CLP): You must obtain a CLP by passing a written knowledge test and paying the required fee. You must hold the CLP for at least 14 days before taking the CDL skills test.
5. Driving Record: You must provide your driving record from all states where you have held a driver's license in the past 10 years.
6. Skills test: You must pass a skills test consisting of a pre-trip inspection, basic control skills test, and road test.
7. Fees: You must pay the required fees for obtaining the CDL and any endorsements.
It is important to note that additional requirements may apply depending on your specific situation or the type of vehicle you plan to operate.
In Rhode Island, the minimum age requirement for obtaining a Class A CDL license is 18 years old. However, if you are under 21 years old, you will be restricted to intrastate operation only. This means that you can only operate commercial vehicles within the state of Rhode Island and cannot operate across state lines.
If you want to operate commercial vehicles across state lines, you must be at least 21 years old to obtain a Class A CDL license.
If you want to operate commercial vehicles across state lines, you must be at least 21 years old to obtain a Class A CDL license.
Yes, depending on the type of vehicle you plan to operate, you may need to obtain additional endorsements to your Class A CDL license.
The most common endorsements for a Class A CDL license are:
1. T - Double/Triple Trailers: This endorsement allows you to tow double or triple trailers.
2. P - Passenger: This endorsement allows you to operate a vehicle designed to transport 16 or more passengers, including the driver.
3. N - Tank Vehicles: This endorsement allows you to operate a vehicle designed to transport liquids or gases.
4. H - Hazardous Materials: This endorsement allows you to transport hazardous materials as defined by the Federal Motor Carrier Safety Administration (FMCSA).
To obtain an endorsement, you must pass additional knowledge and skills tests and pay the required fees. It is important to note that some endorsements may have additional requirements, such as background checks or TSA security threat assessments for the Hazardous Materials endorsement.
The most common endorsements for a Class A CDL license are:
1. T - Double/Triple Trailers: This endorsement allows you to tow double or triple trailers.
2. P - Passenger: This endorsement allows you to operate a vehicle designed to transport 16 or more passengers, including the driver.
3. N - Tank Vehicles: This endorsement allows you to operate a vehicle designed to transport liquids or gases.
4. H - Hazardous Materials: This endorsement allows you to transport hazardous materials as defined by the Federal Motor Carrier Safety Administration (FMCSA).
To obtain an endorsement, you must pass additional knowledge and skills tests and pay the required fees. It is important to note that some endorsements may have additional requirements, such as background checks or TSA security threat assessments for the Hazardous Materials endorsement.
The Class A CDL skills test is a two-part examination that includes a pre-trip inspection and a road test.
1. Pre-Trip Inspection: You will be asked to perform a pre-trip inspection of your vehicle to ensure that it is safe to operate. This includes checking the vehicle's brakes, tires, lights, signals, and other important components.
2. Road Test: You will be asked to demonstrate your driving skills on the road. The examiner will evaluate your ability to perform basic driving maneuvers such as turning, backing up, and parking. You will also be asked to demonstrate your ability to change lanes, merge into traffic, and safely navigate intersections.
In addition to these basic driving maneuvers, you may also be asked to demonstrate your ability to operate a vehicle with specific features such as air brakes or double/triple trailers if you have the appropriate endorsements.
It is important to note that the Class A CDL skills test is a rigorous exam that requires significant preparation and practice. It is recommended that you enroll in a CDL training program and practice driving with an experienced CDL driver before attempting the skills test.
1. Pre-Trip Inspection: You will be asked to perform a pre-trip inspection of your vehicle to ensure that it is safe to operate. This includes checking the vehicle's brakes, tires, lights, signals, and other important components.
2. Road Test: You will be asked to demonstrate your driving skills on the road. The examiner will evaluate your ability to perform basic driving maneuvers such as turning, backing up, and parking. You will also be asked to demonstrate your ability to change lanes, merge into traffic, and safely navigate intersections.
In addition to these basic driving maneuvers, you may also be asked to demonstrate your ability to operate a vehicle with specific features such as air brakes or double/triple trailers if you have the appropriate endorsements.
It is important to note that the Class A CDL skills test is a rigorous exam that requires significant preparation and practice. It is recommended that you enroll in a CDL training program and practice driving with an experienced CDL driver before attempting the skills test.
Yes, there are some restrictions and limitations for drivers with a Class A CDL license. Some of the common restrictions include:
1. E - No Manual Transmission - This restriction is placed on drivers who take their skills test in a vehicle with an automatic transmission. It means that the driver is only authorized to operate vehicles with automatic transmissions.
2. L - No Air Brake - This restriction is placed on drivers who have not passed the air brake knowledge test or who have not completed the required training to operate vehicles with air brakes.
3. Z - No Full Air Brake - This restriction is placed on drivers who have not passed the air brake knowledge test or who have not completed the required training to operate vehicles with full air brakes.
4. O - No Tractor-Trailer - This restriction is placed on drivers who have only taken their skills test in a combination vehicle that does not meet the definition of a tractor-trailer.
It is important to note that restrictions can vary depending on the state and circumstances. Additionally, some endorsements may also come with their own set of restrictions or requirements, such as additional training or background checks for the Hazardous Materials endorsement.
Drivers should also be aware of federal regulations regarding hours of service, weight limits, and other important safety considerations when operating a commercial vehicle.
1. E - No Manual Transmission - This restriction is placed on drivers who take their skills test in a vehicle with an automatic transmission. It means that the driver is only authorized to operate vehicles with automatic transmissions.
2. L - No Air Brake - This restriction is placed on drivers who have not passed the air brake knowledge test or who have not completed the required training to operate vehicles with air brakes.
3. Z - No Full Air Brake - This restriction is placed on drivers who have not passed the air brake knowledge test or who have not completed the required training to operate vehicles with full air brakes.
4. O - No Tractor-Trailer - This restriction is placed on drivers who have only taken their skills test in a combination vehicle that does not meet the definition of a tractor-trailer.
It is important to note that restrictions can vary depending on the state and circumstances. Additionally, some endorsements may also come with their own set of restrictions or requirements, such as additional training or background checks for the Hazardous Materials endorsement.
Drivers should also be aware of federal regulations regarding hours of service, weight limits, and other important safety considerations when operating a commercial vehicle.
In Rhode Island, the Class A CDL written test is only available in English. The Rhode Island Division of Motor Vehicles (DMV) requires that all applicants for a CDL license demonstrate a proficiency in the English language, as it is the language of instruction and communication in the trucking industry.
However, if you have difficulty reading or understanding English, you may be able to receive assistance from an interpreter. The interpreter must be fluent in both English and your preferred language and must not be a family member or friend.
It is important to note that while an interpreter can assist with the written test, they are not allowed to help you with the actual content of the test or provide any answers. Additionally, all road signs and safety instructions will be in English, so it is important to have a basic understanding of the language before operating a commercial vehicle on the road.
However, if you have difficulty reading or understanding English, you may be able to receive assistance from an interpreter. The interpreter must be fluent in both English and your preferred language and must not be a family member or friend.
It is important to note that while an interpreter can assist with the written test, they are not allowed to help you with the actual content of the test or provide any answers. Additionally, all road signs and safety instructions will be in English, so it is important to have a basic understanding of the language before operating a commercial vehicle on the road.
Yes, if you have a disability that would make it difficult for you to take the Class A CDL written test under standard testing conditions, you may be eligible for accommodations. The Rhode Island Division of Motor Vehicles (DMV) provides reasonable accommodations to ensure that all individuals have an equal opportunity to demonstrate their ability to operate a commercial vehicle safely.
To request accommodations, you must complete the DMV's Request for Reasonable Accommodation form and submit it along with documentation of your disability. The documentation must be from a licensed healthcare provider and should include a diagnosis, a description of your functional limitations, and recommendations for accommodations.
Examples of accommodations that may be provided include extended testing time, a separate testing room, the use of assistive technology, or a test in an alternative format. The DMV will review your request and determine what accommodations are appropriate based on your individual needs.
It is important to note that the DMV may require additional documentation or evaluations to determine eligibility for accommodations. It is recommended that you submit your request as early as possible to allow time for processing.
To request accommodations, you must complete the DMV's Request for Reasonable Accommodation form and submit it along with documentation of your disability. The documentation must be from a licensed healthcare provider and should include a diagnosis, a description of your functional limitations, and recommendations for accommodations.
Examples of accommodations that may be provided include extended testing time, a separate testing room, the use of assistive technology, or a test in an alternative format. The DMV will review your request and determine what accommodations are appropriate based on your individual needs.
It is important to note that the DMV may require additional documentation or evaluations to determine eligibility for accommodations. It is recommended that you submit your request as early as possible to allow time for processing.
If you fail the Class A CDL written test, you will be allowed to retake the test after a waiting period of at least one day. You must pay the testing fee again each time you retake the test.
The exact waiting period may vary depending on the specific test and location, so it is important to check with the Rhode Island Division of Motor Vehicles (DMV) for specific details.
It is also important to note that there is a limit to the number of times you can take the test. If you fail the test a certain number of times (usually three), you may be required to wait a longer period of time before retaking the test or may be required to complete additional training before being allowed to take the test again.
If you continue to have difficulty passing the written test, it may be beneficial to seek additional training or study materials to help improve your understanding of the material. The DMV also offers study guides and practice tests that can help prepare you for the exam.
The exact waiting period may vary depending on the specific test and location, so it is important to check with the Rhode Island Division of Motor Vehicles (DMV) for specific details.
It is also important to note that there is a limit to the number of times you can take the test. If you fail the test a certain number of times (usually three), you may be required to wait a longer period of time before retaking the test or may be required to complete additional training before being allowed to take the test again.
If you continue to have difficulty passing the written test, it may be beneficial to seek additional training or study materials to help improve your understanding of the material. The DMV also offers study guides and practice tests that can help prepare you for the exam.
