Bus
This endorsement is required for driving a school bus. To receive this endorsement, applicants must pass a test. The test consists of 20 multiple choice questions. To pass, the applicant must answer at least 16 questions correctly. Each question has three or four possible answer choices. Test questions come from the Wyoming Driver License Manual for Commercial and Heavy Vehicles. Questions come from chapters covering School Buses, Pre-Trip Vehicle Inspection Test, Basic Vehicle Control Skills Test and On-Road Driving. The School Bus endorsement can be used with the Class A, B or C CDL.
Number of Question
Passing Score
8. If approaching a railroad crossing while driving a placarded vehicle, you should always:
Explanation
If approaching a railroad crossing while driving a transit bus, school bus, or placarded vehicle, special procedures apply. Before crossing, stop your vehicle within 50 feet of, but not less than 15 feet from, the nearest rail. Activate your four-way flashers while crossing. Do not stop, change gears, or change lanes while any part of your vehicle is proceeding across the tracks.
9. At a passive railroad crossing:
Explanation
Passive railroad crossings are not controlled by any traffic control devices. At such crossings, it is entirely a driver's responsibility to determine when it is safe to cross the tracks.
10. When asked about the vehicle's oil during the vehicle inspection test, you must be able to do all of the following, except:
Explanation
During the vehicle inspection test, you must be able to indicate where the oil dipstick is located; show that the oil level is within a safe operating range; and show that the oil level is above the refill mark.
11. Properly adjusted mirrors on a school bus allow the driver to see ____ behind the bus.
Explanation
Proper mirror adjustment is vital to the safe operation of a school bus. A bus's flat mirrors should be adjusted so the driver is able to see 200 feet, or four bus lengths, behind the bus.
12. In the event of a bus evacuation, students should be led at least ____ away from the road.
Explanation
If it is necessary to evacuate a school bus, students should be led by the driver in the direction of oncoming traffic to a safe location that is at least 100 feet off the road. This will help to ensure that they are not hit by flying debris if another vehicle hits the bus.
13. A bus driver approaching a bus stop should stop at least 10 feet away from waiting students because:
Explanation
At a stop, a school bus should be stopped with the front bumper at least 10 feet away from the students. This forces the students to walk toward the bus, allowing the driver to keep an eye on their movements.
14. If you must drive in reverse at a student pick-up point, you should:
Explanation
Backing in a school bus is strongly discouraged and should be done only if there is no other safe way to move the vehicle. If you must drive in reverse at a student pick-up point, you should wait until all students have first loaded the bus.
Ranked by best match
Frequently Asked Questions
Here are the steps to obtain a CDL Bus endorsement in Wyoming:
1. Obtain a Wyoming CDL learner's permit by passing the general knowledge test and any other required tests for the type of CDL you need (Class A, B, or C).
2. Meet the requirements for obtaining a CDL Bus endorsement, which includes being at least 18 years old, having a valid Wyoming driver's license, and passing a Department of Transportation (DOT) physical exam.
3. Study for and pass the CDL bus endorsement knowledge test at a Wyoming Department of Transportation (WYDOT) Driver Services office.
4. Schedule and pass a CDL bus endorsement skills test with an approved third-party tester or at a WYDOT Driver Services office.
5. Once you have passed the skills test, take your paperwork to a WYDOT Driver Services office to have your CDL Bus endorsement added to your CDL.
It's important to note that you may need additional endorsements if you plan to transport hazardous materials or passengers in specific types of vehicles. Be sure to check with WYDOT for any other requirements or restrictions that may apply.
1. Obtain a Wyoming CDL learner's permit by passing the general knowledge test and any other required tests for the type of CDL you need (Class A, B, or C).
2. Meet the requirements for obtaining a CDL Bus endorsement, which includes being at least 18 years old, having a valid Wyoming driver's license, and passing a Department of Transportation (DOT) physical exam.
3. Study for and pass the CDL bus endorsement knowledge test at a Wyoming Department of Transportation (WYDOT) Driver Services office.
4. Schedule and pass a CDL bus endorsement skills test with an approved third-party tester or at a WYDOT Driver Services office.
5. Once you have passed the skills test, take your paperwork to a WYDOT Driver Services office to have your CDL Bus endorsement added to your CDL.
It's important to note that you may need additional endorsements if you plan to transport hazardous materials or passengers in specific types of vehicles. Be sure to check with WYDOT for any other requirements or restrictions that may apply.
To obtain a CDL Bus license in Wyoming, you must meet the following requirements:
1. Be at least 18 years of age.
2. Have a valid Wyoming driver's license.
3. Pass a Department of Transportation (DOT) physical exam to prove that you are physically capable of driving a commercial motor vehicle (CMV).
4. Obtain a CDL learner's permit by passing the general knowledge test and any other required tests for the type of CDL you need (Class A, B, or C).
5. Pass the CDL Bus endorsement knowledge test, which covers topics such as passenger safety, loading and unloading procedures, and emergency procedures.
6. Pass the CDL Bus endorsement skills test, which includes a pre-trip inspection, basic vehicle control, and on-road driving test in a bus or other passenger vehicle.
It's important to note that you may need additional endorsements if you plan to transport hazardous materials or passengers in specific types of vehicles. Before applying for your CDL Bus license, be sure to check with your local Wyoming Department of Transportation (WYDOT) Driver Services office for any other requirements or restrictions that may apply.
1. Be at least 18 years of age.
2. Have a valid Wyoming driver's license.
3. Pass a Department of Transportation (DOT) physical exam to prove that you are physically capable of driving a commercial motor vehicle (CMV).
4. Obtain a CDL learner's permit by passing the general knowledge test and any other required tests for the type of CDL you need (Class A, B, or C).
5. Pass the CDL Bus endorsement knowledge test, which covers topics such as passenger safety, loading and unloading procedures, and emergency procedures.
6. Pass the CDL Bus endorsement skills test, which includes a pre-trip inspection, basic vehicle control, and on-road driving test in a bus or other passenger vehicle.
It's important to note that you may need additional endorsements if you plan to transport hazardous materials or passengers in specific types of vehicles. Before applying for your CDL Bus license, be sure to check with your local Wyoming Department of Transportation (WYDOT) Driver Services office for any other requirements or restrictions that may apply.
While Wyoming does not require specific experience or training to obtain a CDL Bus endorsement, it is highly recommended that you undergo some form of training before taking the CDL Bus endorsement skills test. This will help you learn the proper techniques for operating a bus or other passenger vehicle and increase your chances of passing the skills test.
There are several ways to obtain training for a CDL Bus endorsement, including:
1. Enrolling in a commercial driving school that offers a CDL Bus training program.
2. Taking a course through your employer or a government agency that requires a CDL Bus endorsement.
3. Shadowing an experienced bus driver to learn the ins and outs of operating a passenger vehicle.
In addition, some employers may require specific experience or training before hiring you to drive their buses. Be sure to check with your prospective employer for any additional requirements beyond what is necessary to obtain your CDL Bus endorsement.
There are several ways to obtain training for a CDL Bus endorsement, including:
1. Enrolling in a commercial driving school that offers a CDL Bus training program.
2. Taking a course through your employer or a government agency that requires a CDL Bus endorsement.
3. Shadowing an experienced bus driver to learn the ins and outs of operating a passenger vehicle.
In addition, some employers may require specific experience or training before hiring you to drive their buses. Be sure to check with your prospective employer for any additional requirements beyond what is necessary to obtain your CDL Bus endorsement.
Yes, there are different classes or types of CDL Bus licenses in Wyoming.
The three different classes of CDLs are:
1. Class A CDL: This allows drivers to operate a combination of vehicles with a Gross Combination Weight Rating (GCWR) of 26,001 pounds or more, provided the vehicle being towed weighs more than 10,000 pounds.
2. Class B CDL: This allows drivers to operate a single vehicle with a Gross Vehicle Weight Rating (GVWR) of 26,001 pounds or more, or any such vehicle towing a vehicle weighing less than 10,000 pounds.
3. Class C CDL: This allows drivers to operate a single or combination vehicle that does not meet the criteria for either Class A or B and is designed to transport 16 or more passengers (including the driver) or hazardous materials.
In addition to the three classes of CDLs, there are also various endorsements that you may need to obtain in order to operate certain types of buses or other passenger vehicles. For example, you may need a Passenger (P) endorsement to operate a bus with 16 or more passengers, a School Bus (S) endorsement to operate a school bus, or a Hazardous Materials (H) endorsement to transport hazardous materials on your bus.
The three different classes of CDLs are:
1. Class A CDL: This allows drivers to operate a combination of vehicles with a Gross Combination Weight Rating (GCWR) of 26,001 pounds or more, provided the vehicle being towed weighs more than 10,000 pounds.
2. Class B CDL: This allows drivers to operate a single vehicle with a Gross Vehicle Weight Rating (GVWR) of 26,001 pounds or more, or any such vehicle towing a vehicle weighing less than 10,000 pounds.
3. Class C CDL: This allows drivers to operate a single or combination vehicle that does not meet the criteria for either Class A or B and is designed to transport 16 or more passengers (including the driver) or hazardous materials.
In addition to the three classes of CDLs, there are also various endorsements that you may need to obtain in order to operate certain types of buses or other passenger vehicles. For example, you may need a Passenger (P) endorsement to operate a bus with 16 or more passengers, a School Bus (S) endorsement to operate a school bus, or a Hazardous Materials (H) endorsement to transport hazardous materials on your bus.
No, you cannot use your personal vehicle for the CDL Bus driving test in Wyoming. The Wyoming Department of Transportation requires that you take the driving test in a vehicle that meets certain specifications for the class of CDL that you are testing for.
For example, if you are testing for a Class B CDL with a Passenger (P) endorsement, you must take the driving test in a Class B bus that is designed to transport 16 or more passengers. The bus must also have a GVWR of at least 26,001 pounds and meet other requirements set forth by the Wyoming Department of Transportation.
It is important to note that you cannot take the driving test in a rental vehicle or a vehicle provided by the testing facility. You must provide your own vehicle that meets the requirements for the class of CDL and endorsement that you are testing for.
Before taking the driving test, be sure to carefully review the Wyoming Commercial Driver License Manual and contact your nearest driver exam station to ensure that you meet all of the requirements for taking the test.
For example, if you are testing for a Class B CDL with a Passenger (P) endorsement, you must take the driving test in a Class B bus that is designed to transport 16 or more passengers. The bus must also have a GVWR of at least 26,001 pounds and meet other requirements set forth by the Wyoming Department of Transportation.
It is important to note that you cannot take the driving test in a rental vehicle or a vehicle provided by the testing facility. You must provide your own vehicle that meets the requirements for the class of CDL and endorsement that you are testing for.
Before taking the driving test, be sure to carefully review the Wyoming Commercial Driver License Manual and contact your nearest driver exam station to ensure that you meet all of the requirements for taking the test.
Yes, there are specific skills and maneuvers that you will need to demonstrate during the CDL Bus driving test in Wyoming. The purpose of the test is to ensure that you have the knowledge and skills to safely operate a commercial vehicle on the road.
During the driving test, you will be evaluated on your ability to perform basic vehicle maneuvers, including:
1. Pre-trip inspection: You will need to show that you can perform a thorough pre-trip inspection of your vehicle and identify any potential safety hazards.
2. Backing: You will be asked to back up your vehicle in a straight line for a distance of at least 50 feet and into a space that is 8 1/2 feet wide.
3. Parallel parking: You will need to parallel park your vehicle within a space that is 24 feet long and 8 feet wide.
4. Cornering: You will be evaluated on your ability to safely navigate turns and corners while maintaining proper lane positioning.
5. Lane changes: You will need to demonstrate that you can safely change lanes, check your mirrors, signal properly, and adjust your speed as necessary.
6. Braking: You will be asked to demonstrate emergency braking and stopping your vehicle as quickly as possible without skidding or losing control.
In addition to these basic maneuvers, you may also be asked to demonstrate your ability to operate your vehicle in traffic, merge onto a highway, or navigate other real-world driving situations.
It is important to practice these skills and maneuvers in advance of the driving test in order to feel confident and prepared on test day.
During the driving test, you will be evaluated on your ability to perform basic vehicle maneuvers, including:
1. Pre-trip inspection: You will need to show that you can perform a thorough pre-trip inspection of your vehicle and identify any potential safety hazards.
2. Backing: You will be asked to back up your vehicle in a straight line for a distance of at least 50 feet and into a space that is 8 1/2 feet wide.
3. Parallel parking: You will need to parallel park your vehicle within a space that is 24 feet long and 8 feet wide.
4. Cornering: You will be evaluated on your ability to safely navigate turns and corners while maintaining proper lane positioning.
5. Lane changes: You will need to demonstrate that you can safely change lanes, check your mirrors, signal properly, and adjust your speed as necessary.
6. Braking: You will be asked to demonstrate emergency braking and stopping your vehicle as quickly as possible without skidding or losing control.
In addition to these basic maneuvers, you may also be asked to demonstrate your ability to operate your vehicle in traffic, merge onto a highway, or navigate other real-world driving situations.
It is important to practice these skills and maneuvers in advance of the driving test in order to feel confident and prepared on test day.
Yes, there are additional medical and physical requirements for obtaining a CDL Bus endorsement in Wyoming. The Federal Motor Carrier Safety Administration (FMCSA) sets the standards for medical qualifications for commercial drivers, and these standards are adopted by the Wyoming Department of Transportation.
To obtain a CDL Bus endorsement, you must meet the following medical requirements:
1. You must have a valid medical certificate issued by a licensed medical examiner who is listed on the National Registry of Certified Medical Examiners.
2. You must meet the minimum vision requirements, including having at least 20/40 vision in each eye (with or without corrective lenses) and at least 70 degrees of peripheral vision in each eye.
3. You must not have any disqualifying medical conditions, such as epilepsy, insulin-dependent diabetes, or certain heart conditions.
In addition to meeting these medical requirements, you must also be able to physically operate the commercial vehicle and perform the required maneuvers and tasks. This includes being able to climb into and out of the vehicle, operate the controls, and perform other physical tasks as necessary.
If you have any questions about the medical or physical requirements for obtaining a CDL Bus endorsement in Wyoming, you should contact your nearest driver exam station or review the Wyoming Commercial Driver License Manual.
To obtain a CDL Bus endorsement, you must meet the following medical requirements:
1. You must have a valid medical certificate issued by a licensed medical examiner who is listed on the National Registry of Certified Medical Examiners.
2. You must meet the minimum vision requirements, including having at least 20/40 vision in each eye (with or without corrective lenses) and at least 70 degrees of peripheral vision in each eye.
3. You must not have any disqualifying medical conditions, such as epilepsy, insulin-dependent diabetes, or certain heart conditions.
In addition to meeting these medical requirements, you must also be able to physically operate the commercial vehicle and perform the required maneuvers and tasks. This includes being able to climb into and out of the vehicle, operate the controls, and perform other physical tasks as necessary.
If you have any questions about the medical or physical requirements for obtaining a CDL Bus endorsement in Wyoming, you should contact your nearest driver exam station or review the Wyoming Commercial Driver License Manual.
No, you cannot legally transport passengers without a CDL Bus endorsement in Wyoming. A CDL Bus endorsement is required for drivers who operate any vehicle designed to transport 16 or more passengers, including the driver. This includes vehicles such as buses, vans, and other passenger-carrying vehicles.
To obtain a CDL Bus endorsement in Wyoming, you must pass a written knowledge test and a driving skills test specific to driving a commercial vehicle designed to transport passengers. You must also meet the medical and physical requirements set by the Federal Motor Carrier Safety Administration (FMCSA) and the Wyoming Department of Transportation.
Driving a commercial vehicle without the proper endorsement can result in serious consequences, including fines, license suspension or revocation, and even criminal charges in some cases. It is important to ensure that you have the proper endorsements and training before operating any commercial vehicle.
To obtain a CDL Bus endorsement in Wyoming, you must pass a written knowledge test and a driving skills test specific to driving a commercial vehicle designed to transport passengers. You must also meet the medical and physical requirements set by the Federal Motor Carrier Safety Administration (FMCSA) and the Wyoming Department of Transportation.
Driving a commercial vehicle without the proper endorsement can result in serious consequences, including fines, license suspension or revocation, and even criminal charges in some cases. It is important to ensure that you have the proper endorsements and training before operating any commercial vehicle.
You can add a CDL Bus endorsement to your existing CDL license in Wyoming. To add a CDL Bus endorsement, you will need to pass a written knowledge test and a driving skills test specific to driving a commercial vehicle designed to transport passengers. You must also meet the medical and physical requirements set by the Federal Motor Carrier Safety Administration (FMCSA) and the Wyoming Department of Transportation.
To apply for a CDL Bus endorsement, you should visit your nearest driver exam station and bring your current CDL license, proof of your identity, and proof of your legal presence in the United States. You will also need to pay the required fee for adding the endorsement to your license.
Once you have passed the required tests and met all of the requirements, the CDL Bus endorsement will be added to your existing CDL license. It is important to ensure that your license is up-to-date and that you have all of the required endorsements before operating any commercial vehicle.
To apply for a CDL Bus endorsement, you should visit your nearest driver exam station and bring your current CDL license, proof of your identity, and proof of your legal presence in the United States. You will also need to pay the required fee for adding the endorsement to your license.
Once you have passed the required tests and met all of the requirements, the CDL Bus endorsement will be added to your existing CDL license. It is important to ensure that your license is up-to-date and that you have all of the required endorsements before operating any commercial vehicle.
Yes, there are restrictions and limitations for drivers with a CDL Bus endorsement in Wyoming. These restrictions and limitations are designed to ensure the safety of passengers and other road users.
One of the main restrictions for drivers with a CDL Bus endorsement is the maximum number of passengers they can transport. In Wyoming, drivers with a CDL Bus endorsement are not allowed to transport more than 16 passengers, including the driver. If a driver needs to transport more than 16 passengers, they will need to obtain a Passenger (P) endorsement in addition to their CDL Bus endorsement.
Another restriction for drivers with a CDL Bus endorsement is the type of vehicle they can operate. Drivers with a CDL Bus endorsement are only allowed to operate commercial vehicles designed to transport passengers, such as buses and vans. They are not allowed to operate other types of commercial vehicles, such as tractor-trailers or tankers.
Additionally, drivers with a CDL Bus endorsement must comply with all other regulations and requirements related to commercial driving, including hours-of-service regulations, vehicle maintenance requirements, and drug and alcohol testing requirements.
It is important for drivers with a CDL Bus endorsement to be aware of these restrictions and limitations and to comply with all applicable regulations in order to ensure the safety of themselves and others on the road.
One of the main restrictions for drivers with a CDL Bus endorsement is the maximum number of passengers they can transport. In Wyoming, drivers with a CDL Bus endorsement are not allowed to transport more than 16 passengers, including the driver. If a driver needs to transport more than 16 passengers, they will need to obtain a Passenger (P) endorsement in addition to their CDL Bus endorsement.
Another restriction for drivers with a CDL Bus endorsement is the type of vehicle they can operate. Drivers with a CDL Bus endorsement are only allowed to operate commercial vehicles designed to transport passengers, such as buses and vans. They are not allowed to operate other types of commercial vehicles, such as tractor-trailers or tankers.
Additionally, drivers with a CDL Bus endorsement must comply with all other regulations and requirements related to commercial driving, including hours-of-service regulations, vehicle maintenance requirements, and drug and alcohol testing requirements.
It is important for drivers with a CDL Bus endorsement to be aware of these restrictions and limitations and to comply with all applicable regulations in order to ensure the safety of themselves and others on the road.
