Tank
This endorsement is required to haul any liquid or gaseous materials in a tank or tanks having a capacity of 1,000 gallons or more that is either permanently or temporarily attached to the vehicle or chassis. To receive this endorsement, applicants must pass a test. The test consists of 20 multiple choice questions. Each question has three or four possible answer choices. To pass, the applicant must answer at least 16 questions correctly. Test questions come from the Wyoming Driver License Manual for Commercial and Heavy Vehicles. Questions come from chapters covering: Driving Safely, Tank Vehicles, Hazardous Materials and Combination Vehicles. The Tank endorsement can be used with the Class A, B or C CDL.
Number of Question
Passing Score
1. What happens when the wheels of a trailer lock up?
Explanation
A trailer tends to swing around, potentially resulting in a trailer jackknife, if its wheels lock up.
2. Which of the following is not a type of distraction?
Explanation
Distractions that can affect safe driving can be classified as physical (such as reaching for an object), mental (such as talking with passenger), or both (such as talking on a hand-held phone).
3. Keeping cargo low can:
Explanation
Rollovers can happen when a combination vehicle is turned too quickly. To help prevent the risk of rollover, it is important to keep the vehicle's center of gravity low by loading cargo as close to the ground as possible.
4. After coupling, there should be ____ between the upper and lower fifth wheel.
Explanation
Before a trip, be sure to inspect all couplings. There should be no space between the upper and lower fifth wheel.
5. If you need to travel down a hill, you should switch into a lower gear:
Explanation
Always downshift before beginning to drive downhill. Forcing an automatic transmission into a lower gear at a high speed could damage the transmission and also lead to a loss of ability to engine brake. Drive at a speed that will allow you to control your vehicle without overusing your brakes. When determining a safe speed to drive, you should take into account the steepness of the grade, the length of the grade, the weight of your vehicle, road conditions, and weather conditions.
6. A placard indicating hazardous materials is which shape?
Explanation
In general, vehicles carrying hazardous materials are required to display diamond-shaped warning signs on all four sides. These warning signs are called "placards."
7. The service air line is attached to the:
Explanation
The service air line carries air and is controlled by either the foot brake or trailer hand brake. The service air line is attached to relay valves, which allow the trailer brakes to be applied quickly.
Ranked by best match
Frequently Asked Questions
To obtain a CDL Tank endorsement in Wyoming, follow these steps:
1. Ensure that you have a valid Wyoming CDL.
2. Obtain a Wyoming Commercial Driver License Manual and study it thoroughly, paying particular attention to the section on tanks.
3. Schedule an appointment at a CDL testing site in your area.
4. Pay the required fee for the Tank endorsement.
5. Pass a written test that focuses on tank-related rules and regulations.
6. Complete a Tank endorsement skills test, which includes a pre-trip inspection, basic control skills test, and an on-road driving test.
7. If you pass both tests, you will receive your CDL with Tank endorsement added to it.
Note: It is important to note that before taking the Tank endorsement skills test, you must already have passed the basic CDL skills test and have a CDL permit with Tank endorsement.
1. Ensure that you have a valid Wyoming CDL.
2. Obtain a Wyoming Commercial Driver License Manual and study it thoroughly, paying particular attention to the section on tanks.
3. Schedule an appointment at a CDL testing site in your area.
4. Pay the required fee for the Tank endorsement.
5. Pass a written test that focuses on tank-related rules and regulations.
6. Complete a Tank endorsement skills test, which includes a pre-trip inspection, basic control skills test, and an on-road driving test.
7. If you pass both tests, you will receive your CDL with Tank endorsement added to it.
Note: It is important to note that before taking the Tank endorsement skills test, you must already have passed the basic CDL skills test and have a CDL permit with Tank endorsement.
To obtain a CDL Tank endorsement in Wyoming, you must meet the following requirements:
1. You must be at least 18 years old to drive within Wyoming and 21 years old to drive outside of Wyoming or transport hazardous materials.
2. You must have a valid Wyoming CDL.
3. You must have a good driving record and not have any disqualifying offenses.
4. You must pass a written test that focuses on tanks and tank-related rules and regulations.
5. You must pass a Tank endorsement skills test, which includes a pre-trip inspection, basic control skills test, and an on-road driving test.
6. You must pay the required fee for the Tank endorsement.
Note: Before taking the Tank endorsement skills test, you must already have passed the basic CDL skills test and have a CDL permit with Tank endorsement. Additionally, if you plan to transport hazardous materials, you will need to pass an additional Hazardous Materials (Hazmat) endorsement test and submit to a federal background check.
1. You must be at least 18 years old to drive within Wyoming and 21 years old to drive outside of Wyoming or transport hazardous materials.
2. You must have a valid Wyoming CDL.
3. You must have a good driving record and not have any disqualifying offenses.
4. You must pass a written test that focuses on tanks and tank-related rules and regulations.
5. You must pass a Tank endorsement skills test, which includes a pre-trip inspection, basic control skills test, and an on-road driving test.
6. You must pay the required fee for the Tank endorsement.
Note: Before taking the Tank endorsement skills test, you must already have passed the basic CDL skills test and have a CDL permit with Tank endorsement. Additionally, if you plan to transport hazardous materials, you will need to pass an additional Hazardous Materials (Hazmat) endorsement test and submit to a federal background check.
There is no specific training or experience required to obtain a CDL Tank endorsement in Wyoming, but having experience and training can be helpful in passing the skills tests. However, it is important to note that to obtain a CDL in Wyoming, you must first complete a certified CDL training program or have equivalent experience and pass the basic CDL skills test.
In addition to the basic CDL skills test, you will need to pass a Tank endorsement skills test, which includes a pre-trip inspection, basic control skills test, and an on-road driving test. It is recommended that you study the Wyoming Commercial Driver License Manual and practice operating a vehicle with a tank before taking the Tank endorsement skills test.
If you plan to transport hazardous materials, you will need to complete specialized training and pass an additional Hazardous Materials (Hazmat) endorsement test.
In addition to the basic CDL skills test, you will need to pass a Tank endorsement skills test, which includes a pre-trip inspection, basic control skills test, and an on-road driving test. It is recommended that you study the Wyoming Commercial Driver License Manual and practice operating a vehicle with a tank before taking the Tank endorsement skills test.
If you plan to transport hazardous materials, you will need to complete specialized training and pass an additional Hazardous Materials (Hazmat) endorsement test.
Yes, in addition to the standard CDL written test, you will need to pass a written test specifically for the Tank endorsement. This test will cover the knowledge and skills necessary to safely transport liquids, gases, and other materials in tanks. The topics covered include:
1. Tank vehicles inspection, driving, and safety
2. Hazardous materials regulations and requirements
3. Liquids and gases loading and unloading procedures
4. Tank vehicle emergency response procedures
You can prepare for this written test by studying the Wyoming CDL Manual and taking practice tests specifically for the Tank endorsement. You can find study materials and practice tests on the Wyoming Department of Transportation website or through commercial driving schools.
1. Tank vehicles inspection, driving, and safety
2. Hazardous materials regulations and requirements
3. Liquids and gases loading and unloading procedures
4. Tank vehicle emergency response procedures
You can prepare for this written test by studying the Wyoming CDL Manual and taking practice tests specifically for the Tank endorsement. You can find study materials and practice tests on the Wyoming Department of Transportation website or through commercial driving schools.
The CDL Tank endorsement written test covers the knowledge and skills necessary to safely transport liquids, gases, and other materials in tanks. The test will assess your understanding of the following topics:
1. Tank vehicle inspection and maintenance: This includes knowledge of the different types of tanks, their components, and how to inspect and maintain them.
2. Driving a tank vehicle: This section covers topics such as how to handle the unique characteristics of a tank vehicle, including its high center of gravity and liquid sloshing.
3. Safe tank operation: This section covers how to safely load, unload, and transport hazardous materials in a tank vehicle.
4. Hazardous materials regulations: You will need to be familiar with the federal regulations concerning hazardous materials transportation, including the requirement for placards and proper documentation.
5. Emergency response procedures: You will need to know how to respond to emergencies that may occur while transporting hazardous materials in a tank vehicle.
It is important that you study these topics thoroughly before taking the Tank endorsement written test. You can find study materials and practice tests on the Wyoming Department of Transportation website or through commercial driving schools.
1. Tank vehicle inspection and maintenance: This includes knowledge of the different types of tanks, their components, and how to inspect and maintain them.
2. Driving a tank vehicle: This section covers topics such as how to handle the unique characteristics of a tank vehicle, including its high center of gravity and liquid sloshing.
3. Safe tank operation: This section covers how to safely load, unload, and transport hazardous materials in a tank vehicle.
4. Hazardous materials regulations: You will need to be familiar with the federal regulations concerning hazardous materials transportation, including the requirement for placards and proper documentation.
5. Emergency response procedures: You will need to know how to respond to emergencies that may occur while transporting hazardous materials in a tank vehicle.
It is important that you study these topics thoroughly before taking the Tank endorsement written test. You can find study materials and practice tests on the Wyoming Department of Transportation website or through commercial driving schools.
The CDL Tank endorsement test consists of a written test and a skills test. During the skills test, you will need to demonstrate your ability to safely operate a tank vehicle. The skills test will include the following maneuvers:
1. Vehicle inspection: You will need to perform a thorough inspection of the tank vehicle before driving it.
2. Pre-trip inspection: You will need to demonstrate your ability to perform a pre-trip inspection of the tank vehicle.
3. Basic control skills: You will need to demonstrate your ability to safely operate the tank vehicle in a controlled setting, including backing, turning, and parking.
4. On-road driving: You will need to demonstrate your ability to safely drive the tank vehicle on public roads, including merging, changing lanes, and navigating intersections.
During each of these maneuvers, you will be evaluated on your ability to safely operate the tank vehicle and follow all applicable rules and regulations. It is important that you have thorough knowledge and experience in operating a tank vehicle before taking the Tank endorsement test.
1. Vehicle inspection: You will need to perform a thorough inspection of the tank vehicle before driving it.
2. Pre-trip inspection: You will need to demonstrate your ability to perform a pre-trip inspection of the tank vehicle.
3. Basic control skills: You will need to demonstrate your ability to safely operate the tank vehicle in a controlled setting, including backing, turning, and parking.
4. On-road driving: You will need to demonstrate your ability to safely drive the tank vehicle on public roads, including merging, changing lanes, and navigating intersections.
During each of these maneuvers, you will be evaluated on your ability to safely operate the tank vehicle and follow all applicable rules and regulations. It is important that you have thorough knowledge and experience in operating a tank vehicle before taking the Tank endorsement test.
Yes, there are restrictions and limitations for drivers with a CDL Tank endorsement. These restrictions are in place to ensure the safe operation of tank vehicles. Some of the restrictions and limitations include:
1. Endorsement for specific types of tanks: The Tank endorsement is not a blanket endorsement that allows you to operate any type of tank vehicle. You will need to obtain an endorsement for each type of tank that you plan to operate.
2. Transporting specific types of materials: Depending on the type of Tank endorsement you have, you may be restricted in the types of materials you can transport. For example, if you have an endorsement for transporting hazardous materials in a tank vehicle, you will be restricted to transporting only those materials that are authorized under federal regulations.
3. Vehicle weight restrictions: Tank vehicles can be very heavy, and drivers with a Tank endorsement may be subject to weight restrictions on certain roads and bridges.
4. Additional testing requirements: Drivers with a Tank endorsement may be required to undergo additional training and testing on a regular basis to ensure that they are up-to-date on the latest safety regulations and best practices.
It is important that drivers with a CDL Tank endorsement fully understand these restrictions and limitations and comply with all applicable rules and regulations when operating a tank vehicle.
1. Endorsement for specific types of tanks: The Tank endorsement is not a blanket endorsement that allows you to operate any type of tank vehicle. You will need to obtain an endorsement for each type of tank that you plan to operate.
2. Transporting specific types of materials: Depending on the type of Tank endorsement you have, you may be restricted in the types of materials you can transport. For example, if you have an endorsement for transporting hazardous materials in a tank vehicle, you will be restricted to transporting only those materials that are authorized under federal regulations.
3. Vehicle weight restrictions: Tank vehicles can be very heavy, and drivers with a Tank endorsement may be subject to weight restrictions on certain roads and bridges.
4. Additional testing requirements: Drivers with a Tank endorsement may be required to undergo additional training and testing on a regular basis to ensure that they are up-to-date on the latest safety regulations and best practices.
It is important that drivers with a CDL Tank endorsement fully understand these restrictions and limitations and comply with all applicable rules and regulations when operating a tank vehicle.
No, you cannot transport liquid or gas materials in a tank vehicle without a CDL Tank endorsement. The Federal Motor Carrier Safety Administration (FMCSA) requires drivers to obtain a Tank endorsement on their commercial driver's license if they plan to transport liquid or gas materials in a tank vehicle. The Tank endorsement is a specialized endorsement that indicates you have the necessary knowledge and skills to operate a tank vehicle safely.
Without a Tank endorsement, you may be subject to fines and other penalties if you are caught transporting liquid or gas materials in a tank vehicle. Additionally, operating a tank vehicle without the proper training and endorsements can be extremely dangerous. Tank vehicles have unique handling characteristics that require specialized training and skill to operate safely.
So it is important to obtain the appropriate endorsements and comply with all applicable regulations when transporting liquid or gas materials in a tank vehicle.
Without a Tank endorsement, you may be subject to fines and other penalties if you are caught transporting liquid or gas materials in a tank vehicle. Additionally, operating a tank vehicle without the proper training and endorsements can be extremely dangerous. Tank vehicles have unique handling characteristics that require specialized training and skill to operate safely.
So it is important to obtain the appropriate endorsements and comply with all applicable regulations when transporting liquid or gas materials in a tank vehicle.
You can add the CDL Tank endorsement to your existing CDL license. You do not need to apply for a new license. To add the Tank endorsement to your CDL, you will need to pass a knowledge test and a skills test that are specific to tank vehicles.
The knowledge test will cover topics such as tank vehicle inspection, loading and unloading procedures, and safe driving practices when operating a tank vehicle. The skills test will evaluate your ability to safely operate a tank vehicle in various situations, such as turning, stopping, and backing up.
You should contact your state's Department of Motor Vehicles (DMV) or Department of Transportation (DOT) for information on how to add the Tank endorsement to your CDL license. They will be able to provide you with the necessary application forms, testing requirements, and fees associated with obtaining the Tank endorsement.
It is important to note that you must meet all federal and state requirements for obtaining a Tank endorsement before you can legally operate a tank vehicle. This includes passing the necessary tests, meeting age requirements, and complying with any other specific regulations related to tank vehicles in your state.
The knowledge test will cover topics such as tank vehicle inspection, loading and unloading procedures, and safe driving practices when operating a tank vehicle. The skills test will evaluate your ability to safely operate a tank vehicle in various situations, such as turning, stopping, and backing up.
You should contact your state's Department of Motor Vehicles (DMV) or Department of Transportation (DOT) for information on how to add the Tank endorsement to your CDL license. They will be able to provide you with the necessary application forms, testing requirements, and fees associated with obtaining the Tank endorsement.
It is important to note that you must meet all federal and state requirements for obtaining a Tank endorsement before you can legally operate a tank vehicle. This includes passing the necessary tests, meeting age requirements, and complying with any other specific regulations related to tank vehicles in your state.
Yes, there are specific requirements and regulations for handling hazardous materials with a CDL Tank endorsement. The Federal Motor Carrier Safety Administration (FMCSA) requires drivers who transport hazardous materials in a tank vehicle to obtain a Hazardous Materials (HazMat) endorsement in addition to the Tank endorsement on their commercial driver's license (CDL).
In addition to the requirements for the Tank endorsement, drivers with a HazMat endorsement must also complete a background check and pass a knowledge test that covers topics such as hazardous materials classification, packaging, labeling, and emergency response procedures.
Drivers transporting hazardous materials must also comply with specific regulations related to the handling, loading, and unloading of these materials. These regulations include requirements for proper packaging and labeling of hazardous materials, as well as procedures for handling spills and other emergencies that may occur during transport.
Drivers with a HazMat endorsement are also required to participate in regular training sessions that cover updates to hazardous material regulations and procedures. This training must be completed every three years.
It is important to note that transporting hazardous materials requires specialized knowledge and skills, as well as strict compliance with all applicable regulations. Drivers who transport hazardous materials must take their responsibilities seriously to ensure the safety of themselves, other drivers on the road, and the environment.
In addition to the requirements for the Tank endorsement, drivers with a HazMat endorsement must also complete a background check and pass a knowledge test that covers topics such as hazardous materials classification, packaging, labeling, and emergency response procedures.
Drivers transporting hazardous materials must also comply with specific regulations related to the handling, loading, and unloading of these materials. These regulations include requirements for proper packaging and labeling of hazardous materials, as well as procedures for handling spills and other emergencies that may occur during transport.
Drivers with a HazMat endorsement are also required to participate in regular training sessions that cover updates to hazardous material regulations and procedures. This training must be completed every three years.
It is important to note that transporting hazardous materials requires specialized knowledge and skills, as well as strict compliance with all applicable regulations. Drivers who transport hazardous materials must take their responsibilities seriously to ensure the safety of themselves, other drivers on the road, and the environment.
