Knowledge Test Class A
This license is required for driving any legal combination of vehicles, with a gross combination weight rating of 26,001 pounds or more, provided the GVWR of a trailer exceeds 10,000 pounds. To receive this license, applicants must pass a 50-question test. Test questions come from the Florida CDL Handbook. To pass, applicants must answer 40 questions correctly. Questions come from chapters covering: Introduction, Driving Safely, Transporting Cargo Safely, Air Brakes (if applicable), Combination Vehicles, Pre-Trip Vehicle Inspection Test, Basic Vehicle Control Skills Test and On-Road Driving. Endorsements that may be used with a Class A CDL are: Hazardous materials, Tank, Passenger, Doubles/Triples, HazMat, Tank, Air Brakes and School bus.
Number of Question
Passing Score
1. When checking its automatic transmission fluid, the vehicle:
Explanation
Your vehicle's engine may need to be running in order for you to check the level of its automatic transmission fluid.
2. If driving a truck that requires a CDL for operation:
Explanation
For safety, you must wear your seat belt at all times while operating a CMV.
3. Header boards:
Explanation
Front-end header boards, also known as "headache racks," protect the driver from cargo moving in the event of a crash or emergency stop.
4. For safety purposes, when should you turn off a retarder?
Explanation
Retarders are mechanisms in some vehicles that help slow a vehicle and reduce the need for braking. However, using a retarder may cause wheels to skid when they have poor traction. Turn off retarders when traveling under wet, snowy, or icy conditions.
5. In a newer vehicle, you apply the parking brake:
Explanation
In a newer vehicle with air brakes, the parking brake is controlled by a diamond-shaped yellow knob. The knob is pulled out to apply the parking brakes and pushed in to release them.
6. If federal inspectors judge your vehicle to be unsafe, they can:
Explanation
If a federal or state inspector judges a CMV to be unsafe, they may put it out-of-service until it is fixed.
7. If driving a school bus, your four-way flashers should:
Explanation
When driving a school bus, you must activate your four-way flashers while approaching and crossing a railroad crossing. Deactivate the flashers once your entire vehicle has cleared the tracks.
Ranked by best match
Frequently Asked Questions
A Class A CDL (Commercial Driver's License) license in Florida is a type of license that allows drivers to operate a combination of vehicles with a total weight of 26,001 pounds or more, provided that the weight of the vehicle being towed is more than 10,000 pounds.
Step-by-step process to obtain a Class A CDL license in Florida:
1. Obtain a Commercial Learner's Permit (CLP): To obtain a Class A CDL license in Florida, you'll need to first obtain a Commercial Learner's Permit (CLP) by passing the written knowledge test. You'll need to pass the General Knowledge test and any additional tests for endorsements you may need.
2. Practice driving with your CLP: With your CLP, you can start practicing driving with a qualified CDL holder who is at least 21 years old and has a valid Class A CDL license.
3. Pass the Skills Test: Once you feel confident in your driving skills, you can schedule an appointment to take the Skills Test at a Florida Department of Highway Safety and Motor Vehicles (DHSMV) office or an approved third-party testing site.
4. Pass a Medical Examination: You will need to pass a medical examination and obtain a Medical Examiner's Certificate (MEC) from an approved healthcare provider.
5. Submit required documents: You will need to submit several documents, including proof of identity, residence, and Social Security number, as well as your CLP and MEC.
6. Pay the required fees: You will need to pay the required fees for your CDL license, which vary based on the type of license and endorsements you need.
7. Receive your Class A CDL: Once you have completed all the steps outlined above and passed the Skills Test, you will receive your Class A CDL from the DHSMV or third-party testing site where you took your exam.
Step-by-step process to obtain a Class A CDL license in Florida:
1. Obtain a Commercial Learner's Permit (CLP): To obtain a Class A CDL license in Florida, you'll need to first obtain a Commercial Learner's Permit (CLP) by passing the written knowledge test. You'll need to pass the General Knowledge test and any additional tests for endorsements you may need.
2. Practice driving with your CLP: With your CLP, you can start practicing driving with a qualified CDL holder who is at least 21 years old and has a valid Class A CDL license.
3. Pass the Skills Test: Once you feel confident in your driving skills, you can schedule an appointment to take the Skills Test at a Florida Department of Highway Safety and Motor Vehicles (DHSMV) office or an approved third-party testing site.
4. Pass a Medical Examination: You will need to pass a medical examination and obtain a Medical Examiner's Certificate (MEC) from an approved healthcare provider.
5. Submit required documents: You will need to submit several documents, including proof of identity, residence, and Social Security number, as well as your CLP and MEC.
6. Pay the required fees: You will need to pay the required fees for your CDL license, which vary based on the type of license and endorsements you need.
7. Receive your Class A CDL: Once you have completed all the steps outlined above and passed the Skills Test, you will receive your Class A CDL from the DHSMV or third-party testing site where you took your exam.
With a Class A CDL license in Florida, you can operate a combination of vehicles with a total weight of 26,001 pounds or more, provided that the weight of the vehicle being towed is more than 10,000 pounds. This includes:
1. Tractor-trailers (also known as semi-trucks or 18-wheelers)
2. Truck and trailer combinations
3. Livestock carriers
4. Flatbeds
5. Tanker vehicles
6. Double and triple trailers
7. Any other combination of vehicles with a total weight of over 26,001 pounds.
It's important to note that if you want to operate a vehicle that requires additional endorsements, such as hazardous materials, passenger transport, or tanker vehicles, you'll need to obtain those endorsements in addition to your Class A CDL license.
1. Tractor-trailers (also known as semi-trucks or 18-wheelers)
2. Truck and trailer combinations
3. Livestock carriers
4. Flatbeds
5. Tanker vehicles
6. Double and triple trailers
7. Any other combination of vehicles with a total weight of over 26,001 pounds.
It's important to note that if you want to operate a vehicle that requires additional endorsements, such as hazardous materials, passenger transport, or tanker vehicles, you'll need to obtain those endorsements in addition to your Class A CDL license.
To obtain a Class A CDL (Commercial Driver's License) license in Florida, you will need to meet the following requirements:
1. Age: You must be at least 18 years old to obtain a Class A CDL license, but you will be limited to intrastate (within Florida) driving. If you want to drive across state lines, you must be at least 21 years old.
2. Driver's License: You must have a valid Florida driver's license.
3. Medical Certificate: You must pass a medical examination and obtain a Medical Examiner's Certificate (MEC) from an approved healthcare provider.
4. Commercial Learner's Permit (CLP): You must obtain a Commercial Learner's Permit (CLP) by passing the written knowledge test for the General Knowledge and any additional tests for endorsements you may need.
5. Driving Experience: You must have at least one year of driving experience with a regular driver's license before obtaining your Class A CDL.
6. Skills Test: You must pass the Skills Test, which includes a pre-trip vehicle inspection, basic control skills test, and an on-road driving test.
7. Required Documents: You will need to provide several documents, including proof of identity, residency, and Social Security number, as well as your CLP and MEC.
8. Fees: You will need to pay the required fees for your CDL license and any endorsements you need.
It is important to note that if you have a history of certain criminal offenses or traffic violations, it may affect your eligibility to obtain a Class A CDL license in Florida.
1. Age: You must be at least 18 years old to obtain a Class A CDL license, but you will be limited to intrastate (within Florida) driving. If you want to drive across state lines, you must be at least 21 years old.
2. Driver's License: You must have a valid Florida driver's license.
3. Medical Certificate: You must pass a medical examination and obtain a Medical Examiner's Certificate (MEC) from an approved healthcare provider.
4. Commercial Learner's Permit (CLP): You must obtain a Commercial Learner's Permit (CLP) by passing the written knowledge test for the General Knowledge and any additional tests for endorsements you may need.
5. Driving Experience: You must have at least one year of driving experience with a regular driver's license before obtaining your Class A CDL.
6. Skills Test: You must pass the Skills Test, which includes a pre-trip vehicle inspection, basic control skills test, and an on-road driving test.
7. Required Documents: You will need to provide several documents, including proof of identity, residency, and Social Security number, as well as your CLP and MEC.
8. Fees: You will need to pay the required fees for your CDL license and any endorsements you need.
It is important to note that if you have a history of certain criminal offenses or traffic violations, it may affect your eligibility to obtain a Class A CDL license in Florida.
The minimum age requirement for a Class A CDL license in Florida is 18 years old. However, drivers who are 18-20 years old are limited to intrastate (within Florida) driving only and cannot operate commercial vehicles across state lines or transport hazardous materials.
If you want to drive across state lines or transport hazardous materials, you must be at least 21 years old to obtain a Class A CDL license.
If you want to drive across state lines or transport hazardous materials, you must be at least 21 years old to obtain a Class A CDL license.
You may need additional endorsements on your Class A CDL license depending on the type of vehicle you plan to operate and the cargo you plan to transport. Some common endorsements for a Class A CDL license in Florida include:
1. Hazmat Endorsement: This endorsement allows you to transport hazardous materials.
2. Tanker Endorsement: This endorsement allows you to operate a vehicle that carries liquids or gases in bulk.
3. Double/Triple Trailer Endorsement: This endorsement allows you to operate a vehicle that pulls two or three trailers.
4. Passenger Endorsement: This endorsement allows you to transport passengers in a commercial vehicle, such as a bus.
To obtain an endorsement, you will need to pass additional knowledge and skills tests specific to the type of endorsement you are seeking. It is important to note that some endorsements, such as the Hazmat endorsement, may require additional background checks and security clearance.
1. Hazmat Endorsement: This endorsement allows you to transport hazardous materials.
2. Tanker Endorsement: This endorsement allows you to operate a vehicle that carries liquids or gases in bulk.
3. Double/Triple Trailer Endorsement: This endorsement allows you to operate a vehicle that pulls two or three trailers.
4. Passenger Endorsement: This endorsement allows you to transport passengers in a commercial vehicle, such as a bus.
To obtain an endorsement, you will need to pass additional knowledge and skills tests specific to the type of endorsement you are seeking. It is important to note that some endorsements, such as the Hazmat endorsement, may require additional background checks and security clearance.
The Class A CDL skills test in Florida consists of three parts:
1. Pre-trip Inspection: In this part of the test, you will be required to perform a thorough inspection of your vehicle. You will need to identify and explain any defects or safety issues you find.
2. Basic Controls: In this part of the test, you will be required to demonstrate your ability to control your vehicle in a controlled environment. This includes backing up, turning, and parking.
3. Road Test: In this part of the test, you will be required to demonstrate your ability to safely operate your vehicle on public roads. This includes merging onto highways, changing lanes, and making turns.
During the skills test, you will be evaluated on your ability to safely operate your vehicle, your knowledge of traffic laws and regulations, and your ability to follow proper procedures for performing pre-trip inspections and basic control maneuvers.
It is important to note that the skills test must be conducted in a vehicle that is representative of the type of vehicle you plan to operate with your Class A CDL license. For example, if you plan to operate a vehicle with air brakes, you must take the skills test in a vehicle equipped with air brakes.
1. Pre-trip Inspection: In this part of the test, you will be required to perform a thorough inspection of your vehicle. You will need to identify and explain any defects or safety issues you find.
2. Basic Controls: In this part of the test, you will be required to demonstrate your ability to control your vehicle in a controlled environment. This includes backing up, turning, and parking.
3. Road Test: In this part of the test, you will be required to demonstrate your ability to safely operate your vehicle on public roads. This includes merging onto highways, changing lanes, and making turns.
During the skills test, you will be evaluated on your ability to safely operate your vehicle, your knowledge of traffic laws and regulations, and your ability to follow proper procedures for performing pre-trip inspections and basic control maneuvers.
It is important to note that the skills test must be conducted in a vehicle that is representative of the type of vehicle you plan to operate with your Class A CDL license. For example, if you plan to operate a vehicle with air brakes, you must take the skills test in a vehicle equipped with air brakes.
Yes, there are some restrictions or limitations for drivers with a Class A CDL license in Florida. Some common restrictions include:
1. Air Brake Restriction: If you take the skills test in a vehicle that is not equipped with air brakes, you will receive an air brake restriction on your license. This means you are not authorized to operate a vehicle with air brakes.
2. Manual Transmission Restriction: If you take the skills test in a vehicle with an automatic transmission, you will receive a manual transmission restriction on your license. This means you are not authorized to operate a vehicle with a manual transmission.
3. Hazmat Endorsement Background Check: To obtain a Hazmat endorsement, you must pass a background check conducted by the Transportation Security Administration (TSA).
4. Passenger Endorsement: If you obtain a passenger endorsement, there may be restrictions on the number of passengers you are authorized to transport.
It is important to note that some employers may have additional requirements or restrictions for their drivers beyond those required by the state of Florida. It is always important to understand and comply with any restrictions or limitations on your license to ensure safe and legal operation of your vehicle.
1. Air Brake Restriction: If you take the skills test in a vehicle that is not equipped with air brakes, you will receive an air brake restriction on your license. This means you are not authorized to operate a vehicle with air brakes.
2. Manual Transmission Restriction: If you take the skills test in a vehicle with an automatic transmission, you will receive a manual transmission restriction on your license. This means you are not authorized to operate a vehicle with a manual transmission.
3. Hazmat Endorsement Background Check: To obtain a Hazmat endorsement, you must pass a background check conducted by the Transportation Security Administration (TSA).
4. Passenger Endorsement: If you obtain a passenger endorsement, there may be restrictions on the number of passengers you are authorized to transport.
It is important to note that some employers may have additional requirements or restrictions for their drivers beyond those required by the state of Florida. It is always important to understand and comply with any restrictions or limitations on your license to ensure safe and legal operation of your vehicle.
In Florida, the Class A CDL written test is available in multiple languages, including Spanish, Haitian Creole, and French. However, it is important to note that the skills test must be taken in English. Additionally, if you take the written test in a language other than English, you will be required to take the test in person at a Florida Department of Highway Safety and Motor Vehicles (DHSMV) office. You will also need to provide a valid identification document and proof of your social security number. If you have any questions or concerns about taking the Class A CDL written test in a language other than English, it is recommended that you contact your local DHSMV office for more information.
Yes, if you have a disability that may affect your ability to take the Class A CDL written test, you may request accommodations to assist you. The Florida Department of Highway Safety and Motor Vehicles (DHSMV) provides accommodations for individuals with disabilities in accordance with the Americans with Disabilities Act (ADA).
To request accommodations, you must contact the DHSMV's Bureau of Motorist Compliance and provide documentation of your disability and the specific accommodations you are requesting. Examples of accommodations that may be available include extended time to complete the test, a separate testing area, and a reader or interpreter.
It is important to note that requests for accommodations must be made in advance of your scheduled test date. The DHSMV will review your request and determine if the requested accommodations can be provided. If you have any questions or concerns about requesting accommodations for the Class A CDL written test, it is recommended that you contact your local DHSMV office for more information.
To request accommodations, you must contact the DHSMV's Bureau of Motorist Compliance and provide documentation of your disability and the specific accommodations you are requesting. Examples of accommodations that may be available include extended time to complete the test, a separate testing area, and a reader or interpreter.
It is important to note that requests for accommodations must be made in advance of your scheduled test date. The DHSMV will review your request and determine if the requested accommodations can be provided. If you have any questions or concerns about requesting accommodations for the Class A CDL written test, it is recommended that you contact your local DHSMV office for more information.
If you fail the Class A CDL written test in Florida, you are allowed to retake the test. However, you will be required to wait at least one day before retaking the test. You may retake the test as many times as needed until you pass.
It is important to note that there is a fee for each attempt at the Class A CDL written test in Florida. If you fail the test multiple times, these fees can add up quickly. Therefore, it is recommended that you thoroughly study and prepare for the test before taking it.
If you have failed the Class A CDL written test multiple times and are having difficulty passing, it may be helpful to consider taking a commercial driver's license course or seeking additional resources to improve your knowledge and understanding of the material.
It is important to note that there is a fee for each attempt at the Class A CDL written test in Florida. If you fail the test multiple times, these fees can add up quickly. Therefore, it is recommended that you thoroughly study and prepare for the test before taking it.
If you have failed the Class A CDL written test multiple times and are having difficulty passing, it may be helpful to consider taking a commercial driver's license course or seeking additional resources to improve your knowledge and understanding of the material.
