Tank
This endorsement is required to haul any liquid or gaseous materials in a tank or tanks having a capacity of 1,000 gallons or more that is either permanently or temporarily attached to the vehicle or chassis. To receive this endorsement, applicants must pass a test. The test consists of 20 multiple choice questions. To pass, the applicant must answer at least 16 questions correctly. Test questions come from the Florida CDL Handbook. Questions come from chapters covering: Driving Safely, Combination Vehicles and Doubles and Triples. The Tank endorsement can be used with the Class A, B or C CDL.
Number of Question
Passing Score
1. If corrosive materials leak in the trailer, the trailer should be:
Explanation
Parts of a vehicle that have been exposed to a corrosive material must be thoroughly washed with water.
2. Unbaffled tanks are also referred to as ____ tanks.
Explanation
Unbaffled tanks are also often referred to as "smooth bore tanks."
3. Hazardous materials should be loaded and unloaded:
Explanation
Many hazardous materials become more dangerous when exposed to heat. Hazardous materials should be loaded and unloaded away from heat sources.
4. In an emergency situation, you should:
Explanation
Stopping is not always the safest option when responding to an emergency while driving. It is usually safer to steer out of the way when attempting to avoid a crash.
5. Texting while driving a CMV is:
Explanation
Texting while driving a commercial motor vehicle is both illegal and dangerous. Manually entering text into or reading text from any electronic device is considered texting.
6. When checking your vehicle's lights before driving:
Explanation
To check your vehicle's lights before a trip, you should set the parking brake, turn off the engine, remove the key from the ignition, and take the key with you. Turn on your low beam headlights and four-way flashers. Get out of the vehicle to make sure the lights are working properly.
7. When making a tight maneuver, you should:
Explanation
Make a point of checking your mirrors often when making tight maneuvers.
Ranked by best match
Frequently Asked Questions
To obtain a CDL Tank endorsement in Florida, you must follow these steps:
1. Meet the basic requirements: You must be at least 18 years old, hold a valid Florida driver's license, and pass a medical examination to ensure that you are physically fit to operate a commercial vehicle.
2. Obtain a Commercial Driver's License (CDL): You must already have a valid CDL or obtain one by passing the required written and skills tests.
3. Study for the Tank endorsement knowledge test: You must study the Tank endorsement section in the Florida Commercial Driver License Handbook and prepare for the knowledge test.
4. Schedule and pass the Tank endorsement knowledge test: Contact your local Florida Department of Highway Safety and Motor Vehicles (FLHSMV) office to schedule an appointment to take the Tank endorsement knowledge test. The test consists of 20 multiple-choice questions.
5. Schedule and pass the Tank endorsement skills test: Contact your local FLHSMV office to schedule an appointment to take the Tank endorsement skills test. This test will assess your ability to safely operate a commercial vehicle with a tank.
6. Pay the required fees: There are fees associated with obtaining the Tank endorsement, which you will need to pay at your local FLHSMV office.
Once you have successfully completed these steps, you will be issued a CDL with a Tank endorsement, allowing you to legally transport liquid or gaseous materials in tanks on commercial vehicles.
1. Meet the basic requirements: You must be at least 18 years old, hold a valid Florida driver's license, and pass a medical examination to ensure that you are physically fit to operate a commercial vehicle.
2. Obtain a Commercial Driver's License (CDL): You must already have a valid CDL or obtain one by passing the required written and skills tests.
3. Study for the Tank endorsement knowledge test: You must study the Tank endorsement section in the Florida Commercial Driver License Handbook and prepare for the knowledge test.
4. Schedule and pass the Tank endorsement knowledge test: Contact your local Florida Department of Highway Safety and Motor Vehicles (FLHSMV) office to schedule an appointment to take the Tank endorsement knowledge test. The test consists of 20 multiple-choice questions.
5. Schedule and pass the Tank endorsement skills test: Contact your local FLHSMV office to schedule an appointment to take the Tank endorsement skills test. This test will assess your ability to safely operate a commercial vehicle with a tank.
6. Pay the required fees: There are fees associated with obtaining the Tank endorsement, which you will need to pay at your local FLHSMV office.
Once you have successfully completed these steps, you will be issued a CDL with a Tank endorsement, allowing you to legally transport liquid or gaseous materials in tanks on commercial vehicles.
To get a CDL Tank license in Florida, you must meet the following requirements:
1. Age: You must be at least 18 years of age to apply for a CDL with a Tank endorsement. However, you must be at least 21 years of age to operate a commercial vehicle across state lines or transport hazardous materials.
2. Valid driver's license: You must hold a valid Florida driver's license.
3. Medical exam: You must pass a medical examination and obtain a medical certificate that proves that you are physically fit to operate a commercial vehicle with a tank.
4. CDL: You must already have a valid Commercial Driver's License (CDL) or obtain one by passing the required written and skills tests.
5. Tank endorsement knowledge test: You must pass the Tank endorsement knowledge test, which covers topics such as loading and unloading tank vehicles, proper braking techniques, and determining safe cargo weights.
6. Tank endorsement skills test: You must pass the Tank endorsement skills test, which assesses your ability to safely operate a commercial vehicle with a tank.
7. Fees: There are fees associated with obtaining the Tank endorsement, which you will need to pay at your local FLHSMV office.
It is important to note that you may also be required to undergo additional training and meet other requirements depending on the type of tank vehicle you will be operating and the materials you will be transporting.
1. Age: You must be at least 18 years of age to apply for a CDL with a Tank endorsement. However, you must be at least 21 years of age to operate a commercial vehicle across state lines or transport hazardous materials.
2. Valid driver's license: You must hold a valid Florida driver's license.
3. Medical exam: You must pass a medical examination and obtain a medical certificate that proves that you are physically fit to operate a commercial vehicle with a tank.
4. CDL: You must already have a valid Commercial Driver's License (CDL) or obtain one by passing the required written and skills tests.
5. Tank endorsement knowledge test: You must pass the Tank endorsement knowledge test, which covers topics such as loading and unloading tank vehicles, proper braking techniques, and determining safe cargo weights.
6. Tank endorsement skills test: You must pass the Tank endorsement skills test, which assesses your ability to safely operate a commercial vehicle with a tank.
7. Fees: There are fees associated with obtaining the Tank endorsement, which you will need to pay at your local FLHSMV office.
It is important to note that you may also be required to undergo additional training and meet other requirements depending on the type of tank vehicle you will be operating and the materials you will be transporting.
Yes, you may need specific training or experience to obtain a CDL Tank endorsement in Florida. The requirements for training and experience may vary depending on the type of tank vehicle you will be operating and the materials you will be transporting.
For example, if you will be operating a tank vehicle that transports hazardous materials, you will need to complete additional training and obtain a Hazardous Materials (Hazmat) endorsement on your CDL. This training covers topics such as recognizing hazardous materials, handling emergencies, and complying with federal regulations.
In addition to Hazmat training, you may also need to complete specialized training for the specific type of tank vehicle you will be operating. This could include training on the proper loading and unloading of tank vehicles, as well as techniques for preventing spills or leaks.
It is important to note that some employers may also require applicants for Tank endorsement positions to have previous experience operating tank vehicles or transporting specific types of materials.
Before obtaining a CDL Tank endorsement, it is recommended that you research the specific requirements for the type of tank vehicle you will be operating and consult with your employer or a qualified training provider to ensure that you have met all necessary requirements.
For example, if you will be operating a tank vehicle that transports hazardous materials, you will need to complete additional training and obtain a Hazardous Materials (Hazmat) endorsement on your CDL. This training covers topics such as recognizing hazardous materials, handling emergencies, and complying with federal regulations.
In addition to Hazmat training, you may also need to complete specialized training for the specific type of tank vehicle you will be operating. This could include training on the proper loading and unloading of tank vehicles, as well as techniques for preventing spills or leaks.
It is important to note that some employers may also require applicants for Tank endorsement positions to have previous experience operating tank vehicles or transporting specific types of materials.
Before obtaining a CDL Tank endorsement, it is recommended that you research the specific requirements for the type of tank vehicle you will be operating and consult with your employer or a qualified training provider to ensure that you have met all necessary requirements.
Yes, you will need to pass a written test specifically for the Tank endorsement in order to obtain a CDL with a Tank endorsement in Florida. The Tank endorsement knowledge test assesses your understanding of the rules and regulations related to operating a commercial vehicle with a tank.
The Tank endorsement knowledge test will cover topics such as:
- Inspection and maintenance of tank vehicles
- Proper loading and unloading techniques
- Safe driving practices for tank vehicles
- Identification of hazards and emergency response procedures
- Federal regulations related to the transportation of liquids and gases
You will also need to pass a skills test for the Tank endorsement, which assesses your ability to safely operate a commercial vehicle with a tank. The skills test will include a pre-trip inspection, basic control skills, and an on-road driving test.
It is important to note that if you are also required to obtain a Hazmat endorsement for your CDL, you will need to pass an additional written test specifically for Hazmat. This exam covers topics related to handling hazardous materials, emergency response procedures, and federal regulations related to Hazmat transportation.
Before taking any CDL endorsement tests, it is recommended that you study the Florida CDL Handbook and take practice exams to ensure that you are fully prepared.
The Tank endorsement knowledge test will cover topics such as:
- Inspection and maintenance of tank vehicles
- Proper loading and unloading techniques
- Safe driving practices for tank vehicles
- Identification of hazards and emergency response procedures
- Federal regulations related to the transportation of liquids and gases
You will also need to pass a skills test for the Tank endorsement, which assesses your ability to safely operate a commercial vehicle with a tank. The skills test will include a pre-trip inspection, basic control skills, and an on-road driving test.
It is important to note that if you are also required to obtain a Hazmat endorsement for your CDL, you will need to pass an additional written test specifically for Hazmat. This exam covers topics related to handling hazardous materials, emergency response procedures, and federal regulations related to Hazmat transportation.
Before taking any CDL endorsement tests, it is recommended that you study the Florida CDL Handbook and take practice exams to ensure that you are fully prepared.
The CDL Tank endorsement written test covers a range of topics related to the safe operation of commercial vehicles with tanks. The specific topics covered on the test may vary depending on the state, but in general, the test will cover the following areas:
1. Tank Vehicle Inspection: This section covers the proper procedures for inspecting tank vehicles, including checking for leaks, damage, and other potential safety hazards.
2. Safe Loading and Unloading Procedures: This section will assess your knowledge of how to safely load and unload tank vehicles, including proper procedures for securing cargo and avoiding spills or leaks.
3. Driving Tank Vehicles: This section will cover safe driving practices for tank vehicles, including maintaining a safe following distance, adjusting driving habits based on weather and road conditions, and avoiding sudden stops or turns.
4. Hazardous Materials: If you are transporting hazardous materials in your tank vehicle, this section will cover the rules and regulations related to handling these materials safely.
5. Emergency Procedures: This section will assess your knowledge of how to respond to emergencies while operating a tank vehicle, including procedures for stopping or containing spills or leaks.
6. Federal Regulations: The written test will also cover federal regulations related to the operation of tank vehicles, including weight limits, hours of service requirements, and record-keeping requirements.
It is important to study all of these topics thoroughly before taking the CDL Tank endorsement written test. You can find more information about these topics in the Florida CDL Handbook or by taking practice exams online.
1. Tank Vehicle Inspection: This section covers the proper procedures for inspecting tank vehicles, including checking for leaks, damage, and other potential safety hazards.
2. Safe Loading and Unloading Procedures: This section will assess your knowledge of how to safely load and unload tank vehicles, including proper procedures for securing cargo and avoiding spills or leaks.
3. Driving Tank Vehicles: This section will cover safe driving practices for tank vehicles, including maintaining a safe following distance, adjusting driving habits based on weather and road conditions, and avoiding sudden stops or turns.
4. Hazardous Materials: If you are transporting hazardous materials in your tank vehicle, this section will cover the rules and regulations related to handling these materials safely.
5. Emergency Procedures: This section will assess your knowledge of how to respond to emergencies while operating a tank vehicle, including procedures for stopping or containing spills or leaks.
6. Federal Regulations: The written test will also cover federal regulations related to the operation of tank vehicles, including weight limits, hours of service requirements, and record-keeping requirements.
It is important to study all of these topics thoroughly before taking the CDL Tank endorsement written test. You can find more information about these topics in the Florida CDL Handbook or by taking practice exams online.
Yes, there are specific skills and maneuvers that you will need to demonstrate during the CDL Tank endorsement skills test. These skills and maneuvers are designed to assess your ability to safely operate a commercial vehicle with a tank and avoid accidents or spills.
The Tank endorsement skills test will typically include the following components:
1. Pre-Trip Inspection: You will need to demonstrate your ability to conduct a thorough pre-trip inspection of your tank vehicle, checking for leaks, damage, and other potential safety hazards.
2. Basic Control Skills: You will need to demonstrate your ability to control your tank vehicle in a variety of scenarios, including backing up, turning, and parking.
3. On-Road Driving Test: You will need to demonstrate your ability to safely operate your tank vehicle on the road, including maintaining a safe following distance, staying in your lane, and responding appropriately to traffic signals and signs.
In addition to these basic driving skills, you may also be required to demonstrate your ability to handle emergency situations such as brake failure or other mechanical problems.
It is important to note that the specific skill maneuvers required for the Tank endorsement test may vary depending on the state and the testing location. Be sure to check with your local DMV or testing center for more information about the Tank endorsement skills test in your area.
To prepare for the Tank endorsement skills test, it is important to practice driving a tank vehicle under a variety of conditions and scenarios. You may also want to consider taking a commercial driver training course that includes hands-on instruction in operating tank vehicles.
The Tank endorsement skills test will typically include the following components:
1. Pre-Trip Inspection: You will need to demonstrate your ability to conduct a thorough pre-trip inspection of your tank vehicle, checking for leaks, damage, and other potential safety hazards.
2. Basic Control Skills: You will need to demonstrate your ability to control your tank vehicle in a variety of scenarios, including backing up, turning, and parking.
3. On-Road Driving Test: You will need to demonstrate your ability to safely operate your tank vehicle on the road, including maintaining a safe following distance, staying in your lane, and responding appropriately to traffic signals and signs.
In addition to these basic driving skills, you may also be required to demonstrate your ability to handle emergency situations such as brake failure or other mechanical problems.
It is important to note that the specific skill maneuvers required for the Tank endorsement test may vary depending on the state and the testing location. Be sure to check with your local DMV or testing center for more information about the Tank endorsement skills test in your area.
To prepare for the Tank endorsement skills test, it is important to practice driving a tank vehicle under a variety of conditions and scenarios. You may also want to consider taking a commercial driver training course that includes hands-on instruction in operating tank vehicles.
Yes, there are some restrictions and limitations for drivers with a CDL Tank endorsement. These restrictions and limitations are designed to ensure that drivers with a Tank endorsement have the necessary knowledge and skills to operate commercial vehicles with tanks safely.
Here are some common restrictions and limitations that may apply to drivers with a CDL Tank endorsement:
1. Endorsement-Specific: Your CDL Tank endorsement is specific to the type of tank vehicle you are qualified to operate. For example, if you have a Tank endorsement for liquid tanks, you may not be authorized to operate a tank vehicle that transports hazardous materials.
2. Vehicle-Specific: Your CDL Tank endorsement is also specific to the type of vehicle you are authorized to operate. For example, if you have a Tank endorsement for a commercial vehicle with a tank, you may not be authorized to operate other types of commercial vehicles, such as buses or tractor-trailers.
3. Endorsement Renewal: Your CDL Tank endorsement may need to be renewed periodically, depending on the state where you are licensed. You may need to pass additional tests or complete additional training in order to renew your endorsement.
4. Training Requirements: Drivers with a CDL Tank endorsement may be required to complete additional training or certification in order to transport hazardous materials or other types of cargo.
It is important to understand and comply with any restrictions or limitations that apply to your CDL Tank endorsement in order to ensure safe and legal operation of your commercial vehicle with a tank. Be sure to check with your state licensing agency for more information about the specific requirements and regulations that apply in your area.
Here are some common restrictions and limitations that may apply to drivers with a CDL Tank endorsement:
1. Endorsement-Specific: Your CDL Tank endorsement is specific to the type of tank vehicle you are qualified to operate. For example, if you have a Tank endorsement for liquid tanks, you may not be authorized to operate a tank vehicle that transports hazardous materials.
2. Vehicle-Specific: Your CDL Tank endorsement is also specific to the type of vehicle you are authorized to operate. For example, if you have a Tank endorsement for a commercial vehicle with a tank, you may not be authorized to operate other types of commercial vehicles, such as buses or tractor-trailers.
3. Endorsement Renewal: Your CDL Tank endorsement may need to be renewed periodically, depending on the state where you are licensed. You may need to pass additional tests or complete additional training in order to renew your endorsement.
4. Training Requirements: Drivers with a CDL Tank endorsement may be required to complete additional training or certification in order to transport hazardous materials or other types of cargo.
It is important to understand and comply with any restrictions or limitations that apply to your CDL Tank endorsement in order to ensure safe and legal operation of your commercial vehicle with a tank. Be sure to check with your state licensing agency for more information about the specific requirements and regulations that apply in your area.
No, you cannot transport liquid or gas materials without a CDL Tank endorsement if the gross vehicle weight rating (GVWR) of the vehicle you are operating exceeds 26,000 pounds, or if you are operating a vehicle that is used to transport hazardous materials in placardable quantities (as defined by the U.S. Department of Transportation).
According to federal regulations, any driver who operates a commercial motor vehicle that is designed to transport liquids or gases in bulk containers with a capacity of 1,000 gallons or more, or multiple tanks with an individual capacity of more than 119 gallons, must have a CDL with a Tank endorsement.
The Tank endorsement is a knowledge and skills test that assesses your ability to safely operate a commercial motor vehicle with a tank. It covers topics such as inspection and maintenance procedures, cargo handling and transportation, and emergency response procedures.
If you are caught transporting liquid or gas materials without the proper CDL Tank endorsement, you may be subject to fines and penalties. Additionally, you could be putting yourself and others at risk by operating a commercial motor vehicle without the necessary knowledge and skills.
It is important to comply with all federal and state regulations related to the transportation of liquid or gas materials in commercial motor vehicles. Be sure to check with your state licensing agency for more information about the specific requirements and regulations that apply in your area.
According to federal regulations, any driver who operates a commercial motor vehicle that is designed to transport liquids or gases in bulk containers with a capacity of 1,000 gallons or more, or multiple tanks with an individual capacity of more than 119 gallons, must have a CDL with a Tank endorsement.
The Tank endorsement is a knowledge and skills test that assesses your ability to safely operate a commercial motor vehicle with a tank. It covers topics such as inspection and maintenance procedures, cargo handling and transportation, and emergency response procedures.
If you are caught transporting liquid or gas materials without the proper CDL Tank endorsement, you may be subject to fines and penalties. Additionally, you could be putting yourself and others at risk by operating a commercial motor vehicle without the necessary knowledge and skills.
It is important to comply with all federal and state regulations related to the transportation of liquid or gas materials in commercial motor vehicles. Be sure to check with your state licensing agency for more information about the specific requirements and regulations that apply in your area.
You can add the CDL Tank endorsement to your existing CDL license. The process for adding the Tank endorsement to your CDL may vary depending on the state where you are licensed, but generally involves the following steps:
1. Review the Requirements: Review the requirements for obtaining a CDL Tank endorsement in your state. You may need to meet certain eligibility requirements, such as having a valid CDL and passing a written exam and a skills test.
2. Study the Material: Study the materials provided by your state licensing agency to prepare for the written exam. The materials will cover topics such as inspection and maintenance procedures, cargo handling and transportation, and emergency response procedures.
3. Take the Written Exam: Take and pass the written exam for the CDL Tank endorsement. The exam will test your knowledge of tank vehicle operation and safety practices.
4. Take the Skills Test: Take and pass the skills test for the CDL Tank endorsement. The skills test will evaluate your ability to safely operate a tank vehicle.
5. Pay Fees: Pay any required fees associated with obtaining the CDL Tank endorsement.
Once you have completed these steps, your state licensing agency will add the Tank endorsement to your existing CDL license. You will then be authorized to operate commercial vehicles with tanks that transport liquids or gases in bulk containers with a capacity of 1,000 gallons or more, or multiple tanks with an individual capacity of more than 119 gallons.
It is important to comply with all federal and state regulations related to commercial vehicle operation, including those related to tank vehicles. Be sure to check with your state licensing agency for more information about the specific requirements and regulations that apply in your area.
1. Review the Requirements: Review the requirements for obtaining a CDL Tank endorsement in your state. You may need to meet certain eligibility requirements, such as having a valid CDL and passing a written exam and a skills test.
2. Study the Material: Study the materials provided by your state licensing agency to prepare for the written exam. The materials will cover topics such as inspection and maintenance procedures, cargo handling and transportation, and emergency response procedures.
3. Take the Written Exam: Take and pass the written exam for the CDL Tank endorsement. The exam will test your knowledge of tank vehicle operation and safety practices.
4. Take the Skills Test: Take and pass the skills test for the CDL Tank endorsement. The skills test will evaluate your ability to safely operate a tank vehicle.
5. Pay Fees: Pay any required fees associated with obtaining the CDL Tank endorsement.
Once you have completed these steps, your state licensing agency will add the Tank endorsement to your existing CDL license. You will then be authorized to operate commercial vehicles with tanks that transport liquids or gases in bulk containers with a capacity of 1,000 gallons or more, or multiple tanks with an individual capacity of more than 119 gallons.
It is important to comply with all federal and state regulations related to commercial vehicle operation, including those related to tank vehicles. Be sure to check with your state licensing agency for more information about the specific requirements and regulations that apply in your area.
Yes, there are specific requirements and regulations for handling hazardous materials with a CDL Tank endorsement. If you are transporting hazardous materials, you must also have a Hazardous Materials (HazMat) endorsement on your CDL. The following are some of the requirements and regulations you should be aware of when transporting hazardous materials with a CDL Tank endorsement:
1. HazMat Training: You must complete specialized training on the handling and transportation of hazardous materials. The training must be in compliance with the U.S Department of Transportation's Hazardous Materials Regulations (HMR).
2. Placards: You must display the appropriate placards on your vehicle to indicate that you are transporting hazardous materials. The placards must meet specific size, color, and design requirements.
3. Documentation: You must carry a shipping paper that includes information about the hazardous materials being transported, such as the name of the material, its hazard class, and emergency response information.
4. Inspections: You must perform pre-trip and post-trip inspections of your vehicle to ensure that it is in safe condition for transporting hazardous materials.
5. Parking: You must park your vehicle in designated areas when transporting hazardous materials.
6. Emergency Response: You must be able to respond to emergencies involving hazardous materials, including knowing how to use emergency equipment such as fire extinguishers.
It is important to comply with all federal and state regulations related to the transportation of hazardous materials in commercial motor vehicles. Failure to comply with these regulations can result in fines and penalties, as well as pose serious risks to public safety. Be sure to check with your state licensing agency for more information about the specific requirements and regulations that apply in your area.
1. HazMat Training: You must complete specialized training on the handling and transportation of hazardous materials. The training must be in compliance with the U.S Department of Transportation's Hazardous Materials Regulations (HMR).
2. Placards: You must display the appropriate placards on your vehicle to indicate that you are transporting hazardous materials. The placards must meet specific size, color, and design requirements.
3. Documentation: You must carry a shipping paper that includes information about the hazardous materials being transported, such as the name of the material, its hazard class, and emergency response information.
4. Inspections: You must perform pre-trip and post-trip inspections of your vehicle to ensure that it is in safe condition for transporting hazardous materials.
5. Parking: You must park your vehicle in designated areas when transporting hazardous materials.
6. Emergency Response: You must be able to respond to emergencies involving hazardous materials, including knowing how to use emergency equipment such as fire extinguishers.
It is important to comply with all federal and state regulations related to the transportation of hazardous materials in commercial motor vehicles. Failure to comply with these regulations can result in fines and penalties, as well as pose serious risks to public safety. Be sure to check with your state licensing agency for more information about the specific requirements and regulations that apply in your area.
