Tank
This endorsement is required to haul any liquid or gaseous materials in a tank or tanks having a capacity of 1,000 gallons or more that is either permanently or temporarily attached to the vehicle or chassis. To receive this endorsement, applicants must pass a test. The test consists of 20 multiple choice questions. Each question has four possible answer choices. To pass, the applicant must answer at least 16 questions correctly. Test questions come from the Kansas Commercial Driver License Manual. Questions come from chapters covering: Cargo, Passengers and Tank Vehicles. The Tank endorsement can be used with the Class A, B or C CDL.
Number of Question
Passing Score
1. Looking far ahead of your vehicle while driving is:
Explanation
Good drivers look down the road at least 12 to 15 seconds ahead of their vehicles. This makes it possible to identify hazards early, when drivers are more likely to have time to respond appropriately.
2. If a roadway is covered by fog, it is best for you to:
Explanation
Driving in fog is always dangerous. If possible, you should always avoid driving under foggy conditions.
3. What is another name for the service line?
Explanation
The service line, also called the control line or signal line, carries air to the trailer brakes and is controlled by the foot brake or trailer hand brake.
4. Unbaffled tanks are also referred to as ____ tanks.
Explanation
Unbaffled tanks are also often referred to as "smooth bore tanks."
5. Don't spend too much time looking at a single mirror because:
Explanation
Check you mirrors frequently while driving, but check them quickly. Staring at one mirror for too long can cause you to drive a long distance without knowing what is ahead.
6. Hydraulic brakes can fail due to:
Explanation
Failure of hydraulic brakes is often caused by a loss of hydraulic pressure. Hydraulic brakes may also fade because of overuse on a long downgrade.
7. Which type of material may be required to have a transport index?
Explanation
Some radioactive materials are required to be accompanied by a transport index. A transport index is a number that indicates how much control the material will require during transport. The total transport index of all cargo in a single vehicle may not exceed 50.
Ranked by best match
Frequently Asked Questions
To obtain a CDL Tank endorsement in Kansas, you need to follow these steps:
1. Meet the eligibility requirements: You must be at least 18 years old, hold a valid Kansas CDL, and pass a medical examination to ensure you meet the physical qualifications to operate a commercial vehicle.
2. Study the Kansas CDL Manual: The Tank endorsement test is based on information covered in the CDL Manual. You can obtain a copy of the manual from any Kansas DMV office or download it from the DMV website.
3. Schedule and pass the Tank endorsement knowledge test: Contact your local DMV office to schedule an appointment for the Tank endorsement knowledge test. You must pass this test with a score of at least 80%.
4. Submit required documentation and pay fees: Provide all required documentation, such as your Kansas CDL, proof of residency, and medical examination certificate, and pay the Tank endorsement fee.
5. Practice driving with a tank vehicle: Before taking the Tank endorsement skills test, you must practice driving with a tank vehicle for at least 30 hours under the supervision of a qualified driver.
6. Pass the Tank endorsement skills test: Schedule an appointment for your Tank endorsement skills test at your local DMV office. You will need to demonstrate your ability to operate a tank vehicle safely and effectively.
7. Receive your CDL with Tank endorsement: If you pass both the knowledge and skills tests, you will receive your Kansas CDL with Tank endorsement.
Remember, obtaining a Tank endorsement is just one of several endorsements that you can add to your commercial driver's license in Kansas.
1. Meet the eligibility requirements: You must be at least 18 years old, hold a valid Kansas CDL, and pass a medical examination to ensure you meet the physical qualifications to operate a commercial vehicle.
2. Study the Kansas CDL Manual: The Tank endorsement test is based on information covered in the CDL Manual. You can obtain a copy of the manual from any Kansas DMV office or download it from the DMV website.
3. Schedule and pass the Tank endorsement knowledge test: Contact your local DMV office to schedule an appointment for the Tank endorsement knowledge test. You must pass this test with a score of at least 80%.
4. Submit required documentation and pay fees: Provide all required documentation, such as your Kansas CDL, proof of residency, and medical examination certificate, and pay the Tank endorsement fee.
5. Practice driving with a tank vehicle: Before taking the Tank endorsement skills test, you must practice driving with a tank vehicle for at least 30 hours under the supervision of a qualified driver.
6. Pass the Tank endorsement skills test: Schedule an appointment for your Tank endorsement skills test at your local DMV office. You will need to demonstrate your ability to operate a tank vehicle safely and effectively.
7. Receive your CDL with Tank endorsement: If you pass both the knowledge and skills tests, you will receive your Kansas CDL with Tank endorsement.
Remember, obtaining a Tank endorsement is just one of several endorsements that you can add to your commercial driver's license in Kansas.
To get a CDL Tank license in Kansas, you must meet the following requirements:
1. Age: You must be at least 18 years old to obtain a CDL Tank license and at least 21 years old to operate a commercial vehicle across state lines or transport hazardous materials.
2. Valid driver's license: You must hold a valid driver's license and have a clean driving record.
3. Commercial Learner's Permit (CLP): Before getting your CDL Tank license, you must obtain a CLP, which requires passing a general knowledge test and any applicable endorsement tests.
4. Medical certification: You must provide a current medical examination certificate that meets the requirements of the Federal Motor Carrier Safety Administration (FMCSA).
5. Tank endorsement knowledge test: You must pass the Tank endorsement knowledge test, which covers topics such as loading and unloading tank vehicles, hazardous materials, and emergency procedures.
6. Tank endorsement skills test: You must pass a skills test that demonstrates your ability to safely operate a tank vehicle.
7. Driving experience: You must have at least 30 hours of supervised driving experience operating a tank vehicle before taking the skills test.
8. Background check: You are required to undergo a background check to ensure that you don't have any disqualifying criminal convictions that would prevent you from obtaining a CDL Tank license.
Once you have met all of these requirements, you will receive your CDL with Tank endorsement, which allows you to legally operate tank vehicles on public roads.
1. Age: You must be at least 18 years old to obtain a CDL Tank license and at least 21 years old to operate a commercial vehicle across state lines or transport hazardous materials.
2. Valid driver's license: You must hold a valid driver's license and have a clean driving record.
3. Commercial Learner's Permit (CLP): Before getting your CDL Tank license, you must obtain a CLP, which requires passing a general knowledge test and any applicable endorsement tests.
4. Medical certification: You must provide a current medical examination certificate that meets the requirements of the Federal Motor Carrier Safety Administration (FMCSA).
5. Tank endorsement knowledge test: You must pass the Tank endorsement knowledge test, which covers topics such as loading and unloading tank vehicles, hazardous materials, and emergency procedures.
6. Tank endorsement skills test: You must pass a skills test that demonstrates your ability to safely operate a tank vehicle.
7. Driving experience: You must have at least 30 hours of supervised driving experience operating a tank vehicle before taking the skills test.
8. Background check: You are required to undergo a background check to ensure that you don't have any disqualifying criminal convictions that would prevent you from obtaining a CDL Tank license.
Once you have met all of these requirements, you will receive your CDL with Tank endorsement, which allows you to legally operate tank vehicles on public roads.
Yes, you are required to have specific training and experience to obtain a CDL Tank endorsement in Kansas. Here are the training requirements:
1. Complete a Commercial Driver's License (CDL) training program: You must complete a CDL training program from an accredited school or organization. The program must include classroom instruction and behind-the-wheel training in operating a tank vehicle.
2. Obtain a Commercial Learner's Permit (CLP): You must obtain a CLP by passing the general knowledge test and any applicable endorsement tests.
3. Obtain a Tank endorsement: You must pass the Tank endorsement knowledge test and skills test, which will demonstrate your ability to safely operate a tank vehicle.
4. Practice driving with a tank vehicle: Before taking the Tank endorsement skills test, you must have at least 30 hours of supervised driving experience operating a tank vehicle.
5. Pass the Tank endorsement skills test: You must pass the Tank endorsement skills test, which will demonstrate your ability to safely operate a tank vehicle.
It's important to note that the regulations for obtaining a CDL Tank endorsement may vary by state. Therefore, it's recommended to check with your local DMV or transportation department for specific requirements and regulations.
1. Complete a Commercial Driver's License (CDL) training program: You must complete a CDL training program from an accredited school or organization. The program must include classroom instruction and behind-the-wheel training in operating a tank vehicle.
2. Obtain a Commercial Learner's Permit (CLP): You must obtain a CLP by passing the general knowledge test and any applicable endorsement tests.
3. Obtain a Tank endorsement: You must pass the Tank endorsement knowledge test and skills test, which will demonstrate your ability to safely operate a tank vehicle.
4. Practice driving with a tank vehicle: Before taking the Tank endorsement skills test, you must have at least 30 hours of supervised driving experience operating a tank vehicle.
5. Pass the Tank endorsement skills test: You must pass the Tank endorsement skills test, which will demonstrate your ability to safely operate a tank vehicle.
It's important to note that the regulations for obtaining a CDL Tank endorsement may vary by state. Therefore, it's recommended to check with your local DMV or transportation department for specific requirements and regulations.
Yes, there is an additional written test that you must pass to obtain a CDL Tank endorsement. In addition to the general knowledge test and any other applicable endorsement tests, you will also need to pass the Tank endorsement knowledge test.
The Tank endorsement knowledge test covers topics such as:
1. Loading and unloading tank vehicles
2. Hazardous materials regulations
3. Tank vehicle inspection
4. Tank vehicle operation
5. Emergency procedures
You must pass this written test before you can take the Tank endorsement skills test, which will demonstrate your ability to safely operate a tank vehicle.
It's important to note that the Tank endorsement knowledge test is separate from the Hazardous Materials (HazMat) endorsement knowledge test. If you plan to transport hazardous materials in addition to operating a tank vehicle, you will need to pass both tests and obtain both endorsements.
Overall, it's important to study and prepare for the Tank endorsement knowledge test, as passing this exam is a crucial step towards obtaining your CDL Tank license.
The Tank endorsement knowledge test covers topics such as:
1. Loading and unloading tank vehicles
2. Hazardous materials regulations
3. Tank vehicle inspection
4. Tank vehicle operation
5. Emergency procedures
You must pass this written test before you can take the Tank endorsement skills test, which will demonstrate your ability to safely operate a tank vehicle.
It's important to note that the Tank endorsement knowledge test is separate from the Hazardous Materials (HazMat) endorsement knowledge test. If you plan to transport hazardous materials in addition to operating a tank vehicle, you will need to pass both tests and obtain both endorsements.
Overall, it's important to study and prepare for the Tank endorsement knowledge test, as passing this exam is a crucial step towards obtaining your CDL Tank license.
The CDL Tank endorsement written test covers a variety of topics related to the safe operation of tank vehicles. Here are some of the topics that may be covered in the Tank endorsement written test:
1. Tank vehicle inspection: This topic covers the different parts of a tank vehicle that should be inspected before operation, including the tank, valves, hoses, and fittings.
2. Tank vehicle operation: This topic covers how to safely operate a tank vehicle, including how to handle the unique characteristics of a liquid or gas load.
3. Loading and unloading tank vehicles: This topic covers how to properly load and unload tank vehicles, including safe procedures for connecting and disconnecting hoses and valves.
4. Hazardous materials regulations: This topic covers the regulations related to transporting hazardous materials in a tank vehicle, including labeling and placarding requirements.
5. Emergency procedures: This topic covers how to respond in emergency situations while operating a tank vehicle, including how to respond to spills or leaks of hazardous materials.
It's important to note that the exact topics covered in the CDL Tank endorsement written test may vary by state. Therefore, it's recommended to check with your local DMV or transportation department for specific requirements and regulations.
1. Tank vehicle inspection: This topic covers the different parts of a tank vehicle that should be inspected before operation, including the tank, valves, hoses, and fittings.
2. Tank vehicle operation: This topic covers how to safely operate a tank vehicle, including how to handle the unique characteristics of a liquid or gas load.
3. Loading and unloading tank vehicles: This topic covers how to properly load and unload tank vehicles, including safe procedures for connecting and disconnecting hoses and valves.
4. Hazardous materials regulations: This topic covers the regulations related to transporting hazardous materials in a tank vehicle, including labeling and placarding requirements.
5. Emergency procedures: This topic covers how to respond in emergency situations while operating a tank vehicle, including how to respond to spills or leaks of hazardous materials.
It's important to note that the exact topics covered in the CDL Tank endorsement written test may vary by state. Therefore, it's recommended to check with your local DMV or transportation department for specific requirements and regulations.
Yes, there are specific skills and maneuvers that you will need to demonstrate during the CDL Tank endorsement skills test. These skills and maneuvers are designed to ensure that you are able to safely operate a tank vehicle on the road. Here are some of the skills and maneuvers that you may be asked to perform:
1. Pre-trip inspection: You will need to demonstrate your ability to perform a thorough pre-trip inspection of your tank vehicle, including checking for leaks, inspecting valves and hoses, and verifying that placards and labels are correct.
2. Coupling and uncoupling: You will need to demonstrate your ability to safely couple and uncouple hoses and fittings for loading and unloading the tank vehicle.
3. Driving skills: You will be asked to drive the tank vehicle on a course that includes various turns, stops, and obstacles.
4. Braking: You will need to demonstrate your ability to safely stop the tank vehicle in a controlled manner.
5. Emergency procedures: You may be asked to demonstrate your ability to respond to emergency situations such as a leak or spill of hazardous materials.
It's important to note that the specific skills and maneuvers that you will be asked to perform may vary by state or testing location. Therefore, it's recommended to check with your local DMV or transportation department for specific requirements and regulations.
1. Pre-trip inspection: You will need to demonstrate your ability to perform a thorough pre-trip inspection of your tank vehicle, including checking for leaks, inspecting valves and hoses, and verifying that placards and labels are correct.
2. Coupling and uncoupling: You will need to demonstrate your ability to safely couple and uncouple hoses and fittings for loading and unloading the tank vehicle.
3. Driving skills: You will be asked to drive the tank vehicle on a course that includes various turns, stops, and obstacles.
4. Braking: You will need to demonstrate your ability to safely stop the tank vehicle in a controlled manner.
5. Emergency procedures: You may be asked to demonstrate your ability to respond to emergency situations such as a leak or spill of hazardous materials.
It's important to note that the specific skills and maneuvers that you will be asked to perform may vary by state or testing location. Therefore, it's recommended to check with your local DMV or transportation department for specific requirements and regulations.
Yes, there are restrictions and limitations for drivers with a CDL Tank endorsement. These restrictions and limitations are in place to ensure the safe operation of tank vehicles and the transportation of hazardous materials. Here are some common restrictions and limitations that may apply:
1. Endorsement required: You must hold a valid CDL with a Tank endorsement to operate a tank vehicle.
2. Hazardous materials endorsement: If you are transporting hazardous materials in a tank vehicle, you must also hold a Hazardous Materials endorsement.
3. Tank size: The Tank endorsement may be restricted to certain tank sizes based on the size of the tank vehicle you were trained on and tested in.
4. Liquid or gas only: The Tank endorsement may be limited to either liquid or gas tank vehicles, depending on the type of tank vehicle you were trained on and tested in.
5. Placarding: You must comply with all placarding requirements for hazardous materials being transported in the tank vehicle.
It's important to note that the specific restrictions and limitations for drivers with a CDL Tank endorsement may vary by state or testing location. Therefore, it's recommended to check with your local DMV or transportation department for specific requirements and regulations.
1. Endorsement required: You must hold a valid CDL with a Tank endorsement to operate a tank vehicle.
2. Hazardous materials endorsement: If you are transporting hazardous materials in a tank vehicle, you must also hold a Hazardous Materials endorsement.
3. Tank size: The Tank endorsement may be restricted to certain tank sizes based on the size of the tank vehicle you were trained on and tested in.
4. Liquid or gas only: The Tank endorsement may be limited to either liquid or gas tank vehicles, depending on the type of tank vehicle you were trained on and tested in.
5. Placarding: You must comply with all placarding requirements for hazardous materials being transported in the tank vehicle.
It's important to note that the specific restrictions and limitations for drivers with a CDL Tank endorsement may vary by state or testing location. Therefore, it's recommended to check with your local DMV or transportation department for specific requirements and regulations.
No, you cannot transport liquid or gas materials without a CDL Tank endorsement. Any driver who operates a commercial motor vehicle (CMV) that is designed to transport more than 119 gallons of liquid or more than 1,000 pounds of gas must have a CDL with a Tank endorsement. This includes tank vehicles used to transport hazardous materials.
Transporting hazardous materials without the proper endorsements and certifications can result in serious consequences, including fines, suspension or revocation of your CDL, and even criminal charges. It is important to ensure that you have the proper endorsements and certifications before operating a tank vehicle.
It's important to note that the specific requirements and regulations for obtaining a CDL Tank endorsement may vary by state or testing location. Therefore, it's recommended to check with your local DMV or transportation department for specific requirements and regulations.
Transporting hazardous materials without the proper endorsements and certifications can result in serious consequences, including fines, suspension or revocation of your CDL, and even criminal charges. It is important to ensure that you have the proper endorsements and certifications before operating a tank vehicle.
It's important to note that the specific requirements and regulations for obtaining a CDL Tank endorsement may vary by state or testing location. Therefore, it's recommended to check with your local DMV or transportation department for specific requirements and regulations.
You can add the CDL Tank endorsement to your existing CDL license by passing the required Tank Vehicle written knowledge test and Tank Vehicle skills test. You do not need to apply for a new license.
To add the Tank endorsement to your CDL, you will need to follow these steps:
1. Review the Tank Vehicle section of the Kansas Commercial Driver's License Manual and study for the Tank Vehicle written knowledge test.
2. Schedule an appointment with your local DMV office or third-party testing facility to take the Tank Vehicle written knowledge test.
3. Pass the Tank Vehicle written knowledge test with a score of at least 80%.
4. If required, complete any additional training or certification for transporting hazardous materials.
5. Schedule an appointment with your local DMV office or third-party testing facility to take the Tank Vehicle skills test.
6. Pass the Tank Vehicle skills test, which will include a pre-trip inspection, basic vehicle control, and on-road driving test.
Once you have passed both tests, your CDL will be updated with the Tank endorsement. It's important to note that there may be additional fees associated with adding the endorsement to your CDL license.
To add the Tank endorsement to your CDL, you will need to follow these steps:
1. Review the Tank Vehicle section of the Kansas Commercial Driver's License Manual and study for the Tank Vehicle written knowledge test.
2. Schedule an appointment with your local DMV office or third-party testing facility to take the Tank Vehicle written knowledge test.
3. Pass the Tank Vehicle written knowledge test with a score of at least 80%.
4. If required, complete any additional training or certification for transporting hazardous materials.
5. Schedule an appointment with your local DMV office or third-party testing facility to take the Tank Vehicle skills test.
6. Pass the Tank Vehicle skills test, which will include a pre-trip inspection, basic vehicle control, and on-road driving test.
Once you have passed both tests, your CDL will be updated with the Tank endorsement. It's important to note that there may be additional fees associated with adding the endorsement to your CDL license.
Yes, there are specific requirements and regulations for handling hazardous materials with a CDL Tank endorsement. These requirements are in place to ensure that the transportation of hazardous materials is done safely and to prevent accidents or incidents that may cause harm to people, property, or the environment.
Some of the specific requirements and regulations for handling hazardous materials with a CDL Tank endorsement include:
1. Proper labeling and placarding of the tank vehicle and its contents.
2. Compliance with federal and state regulations for the transportation of hazardous materials.
3. Familiarity with emergency response procedures and proper handling techniques for hazardous materials.
4. Regular inspections and maintenance of the tank vehicle to ensure it is in safe operating condition.
5. Proper use of personal protective equipment (PPE) when handling hazardous materials.
6. Completion of annual training on the safe transportation of hazardous materials.
It's important to note that failure to comply with these requirements and regulations can result in serious consequences, including fines, suspension or revocation of your CDL, and even criminal charges. Therefore, it's important to ensure that you are properly trained and familiar with all applicable regulations before transporting hazardous materials.
Some of the specific requirements and regulations for handling hazardous materials with a CDL Tank endorsement include:
1. Proper labeling and placarding of the tank vehicle and its contents.
2. Compliance with federal and state regulations for the transportation of hazardous materials.
3. Familiarity with emergency response procedures and proper handling techniques for hazardous materials.
4. Regular inspections and maintenance of the tank vehicle to ensure it is in safe operating condition.
5. Proper use of personal protective equipment (PPE) when handling hazardous materials.
6. Completion of annual training on the safe transportation of hazardous materials.
It's important to note that failure to comply with these requirements and regulations can result in serious consequences, including fines, suspension or revocation of your CDL, and even criminal charges. Therefore, it's important to ensure that you are properly trained and familiar with all applicable regulations before transporting hazardous materials.
