Bus
This endorsement is required for driving a school bus. To receive this endorsement, applicants must pass a test The test consists of 20 multiple choice questions. Each question has four answer choices. To pass, the applicant must answer at least 16 questions correctly. Test questions come from the Texas Commercial Motor Vehicle Drivers Handbook. Questions come from chapters covering: School Buses, Pre-Trip Vehicle Inspection Test, Basic Vehicle Control Skills Test and On-Road Driving. The School Bus endorsement can be used with the Class A, B or C CDL.
Number of Question
Passing Score
1. If a student drops an item near a stopped bus, they should:
Explanation
It is dangerous for students to retrieve dropped items because doing so could cause them to disappear from the driver's view at a crucial moment. If an item is dropped, the student should get out of the bus's danger zones, get the attention of the driver, and ask the driver to retrieve the item.
2. During a basic vehicle control skills test, what is considered an encroachment?
Explanation
An encroachment during the basic vehicle control skills test is when an exercise boundary line is touched or crossed by any portion of the applicant's vehicle. Every encroachment will be counted as an error.
3. Before operating a school bus, ____ should be checked.
Explanation
It is essential that school bus drivers check all of the bus's mirrors before operating the vehicle. You should always have a maximum viewing area that is consistent with Federal Motor Vehicle Safety Standards. If necessary, have the positioning of the mirrors adjusted.
4. While students load and unload a bus, the driver should:
Explanation
The driver of a school bus should observe students as they enter or exit the bus to ensure that they are not caught in the door or handrails. It is also important to make sure the students have moved a safe distance away from the unloading area after they have exited the bus.
5. When conducting a vehicle inspection, you must show each of the following, except:
Explanation
When checking the oil pressure gauge as part of a vehicle inspection test, you must ensure that it is working. The gauge should show increasing or normal oil pressure, or the oil pressure warning light should turn off. If equipped with one, the oil temperature gauge should begin a gradual rise to the normal operating range.
6. When asked to make a lane change during the skills test, you should:
Explanation
You will be asked to make multiple lane changes during the driving skills test. Before changing lanes, you should make the necessary traffic checks and use proper signals. Change lanes smoothly when you can do so safely.
7. During the skills test, if making a turn that requires a stop, you should:
Explanation
If you must come to a stop before making a turn during the driving skills test, you should come to a smooth stop behind any stop line, crosswalk, or stop sign. Keep your front wheels aimed straight ahead and do not let your vehicle roll. If stopping behind another vehicle, stop where you are still able to see the rear tires of the vehicle ahead of you.
Ranked by best match
Frequently Asked Questions
To obtain a CDL Bus endorsement in Texas, follow these steps:
1. Obtain a Texas Commercial Driver's License (CDL) by passing a written knowledge test and a skills test. You must also pass a medical examination and meet other requirements, such as being at least 18 years old.
2. Complete a Texas CDL Bus endorsement application form and pay the required fee.
3. Pass the CDL Bus endorsement knowledge test, which covers topics such as passenger safety, loading and unloading passengers, and handling emergency situations.
4. Pass the CDL Bus endorsement skills test, which will include a pre-trip inspection of the bus, basic vehicle control maneuvers, and an on-road driving test.
5. Provide proof of your legal presence in the United States and proof of your Social Security number.
6. Submit to a fingerprint-based background check.
7. If you are currently employed by a motor carrier, they may require you to complete additional training or certification before operating a bus.
Once you have completed these steps, you will be issued a Texas CDL with a Bus endorsement that allows you to operate buses with passengers in Texas.
1. Obtain a Texas Commercial Driver's License (CDL) by passing a written knowledge test and a skills test. You must also pass a medical examination and meet other requirements, such as being at least 18 years old.
2. Complete a Texas CDL Bus endorsement application form and pay the required fee.
3. Pass the CDL Bus endorsement knowledge test, which covers topics such as passenger safety, loading and unloading passengers, and handling emergency situations.
4. Pass the CDL Bus endorsement skills test, which will include a pre-trip inspection of the bus, basic vehicle control maneuvers, and an on-road driving test.
5. Provide proof of your legal presence in the United States and proof of your Social Security number.
6. Submit to a fingerprint-based background check.
7. If you are currently employed by a motor carrier, they may require you to complete additional training or certification before operating a bus.
Once you have completed these steps, you will be issued a Texas CDL with a Bus endorsement that allows you to operate buses with passengers in Texas.
The requirements to get a CDL Bus license in Texas are:
1. Age: You must be at least 18 years old to drive within the state of Texas and at least 21 years old to drive across state lines or transport hazardous materials.
2. Valid driver's license: You must have a valid driver's license issued by the state of Texas.
3. Medical certification: You must pass a medical examination and obtain a medical certification from a certified medical examiner.
4. Commercial learner's permit: You must obtain a commercial learner's permit (CLP) and hold it for at least 14 days before taking the CDL skills test.
5. CDL knowledge test: You must pass a knowledge test specific to the type of vehicle you plan to drive, which includes topics such as air brakes, combination vehicles, and hazardous materials.
6. CDL skills test: You must pass a skills test that includes a pre-trip inspection, basic vehicle control skills, and an on-road driving test.
7. Background check: You must submit to a fingerprint-based background check.
8. Social Security number: You must provide proof of your Social Security number.
9. Legal presence in the United States: You must provide proof of your legal presence in the United States.
10. Endorsements: If you plan to operate a bus with passengers, you will need to obtain a Passenger (P) endorsement on your CDL license by passing an additional knowledge test and skills test specifically for buses.
1. Age: You must be at least 18 years old to drive within the state of Texas and at least 21 years old to drive across state lines or transport hazardous materials.
2. Valid driver's license: You must have a valid driver's license issued by the state of Texas.
3. Medical certification: You must pass a medical examination and obtain a medical certification from a certified medical examiner.
4. Commercial learner's permit: You must obtain a commercial learner's permit (CLP) and hold it for at least 14 days before taking the CDL skills test.
5. CDL knowledge test: You must pass a knowledge test specific to the type of vehicle you plan to drive, which includes topics such as air brakes, combination vehicles, and hazardous materials.
6. CDL skills test: You must pass a skills test that includes a pre-trip inspection, basic vehicle control skills, and an on-road driving test.
7. Background check: You must submit to a fingerprint-based background check.
8. Social Security number: You must provide proof of your Social Security number.
9. Legal presence in the United States: You must provide proof of your legal presence in the United States.
10. Endorsements: If you plan to operate a bus with passengers, you will need to obtain a Passenger (P) endorsement on your CDL license by passing an additional knowledge test and skills test specifically for buses.
Yes, you may need specific experience or training to obtain a CDL Bus endorsement in Texas. The specific requirements for training and experience may depend on the type of bus you plan to operate and your employer's policies.
The Federal Motor Carrier Safety Administration (FMCSA) requires all CDL drivers of passenger-carrying vehicles to complete specialized training that includes:
1. Classroom instruction on passenger safety, loading and unloading passengers, and handling emergency situations.
2. Behind-the-wheel training on a bus that is similar in size to the one you will be operating.
3. A skills test that evaluates your ability to safely operate a passenger bus.
Your employer may also require additional training or certifications beyond what is required by the FMCSA. For example, they may require training on specific types of buses or routes, or certifications for transporting certain types of passengers, such as children or people with disabilities.
It's important to check with your employer about their specific requirements and ensure that you have the necessary training and experience before seeking a CDL Bus endorsement in Texas.
The Federal Motor Carrier Safety Administration (FMCSA) requires all CDL drivers of passenger-carrying vehicles to complete specialized training that includes:
1. Classroom instruction on passenger safety, loading and unloading passengers, and handling emergency situations.
2. Behind-the-wheel training on a bus that is similar in size to the one you will be operating.
3. A skills test that evaluates your ability to safely operate a passenger bus.
Your employer may also require additional training or certifications beyond what is required by the FMCSA. For example, they may require training on specific types of buses or routes, or certifications for transporting certain types of passengers, such as children or people with disabilities.
It's important to check with your employer about their specific requirements and ensure that you have the necessary training and experience before seeking a CDL Bus endorsement in Texas.
Yes, there are different classes or types of CDL Bus licenses in Texas. The type of license you need will depend on the size and weight of the bus you plan to operate and the number of passengers you plan to transport. The following are the classes or types of CDL Bus licenses in Texas:
1. Class B CDL: This license allows you to operate a single vehicle with a GVWR (Gross Vehicle Weight Rating) of 26,001 pounds or more, or a combination of vehicles with a GCWR (Gross Combination Weight Rating) of less than 26,001 pounds. This license also allows you to tow a trailer with a GVWR of less than 10,000 pounds.
2. Class A CDL: This license allows you to operate a combination of vehicles with a GCWR of 26,001 pounds or more, provided that the vehicle being towed has a GVWR of more than 10,000 pounds.
3. Passenger (P) endorsement: This endorsement is required for drivers who plan to transport passengers in vehicles designed to carry 16 or more passengers (including the driver). This includes buses designed for city transit, school buses, and commercial buses.
4. School Bus (S) endorsement: This endorsement is required for drivers who plan to operate a school bus. It includes additional training and testing on topics such as loading and unloading passengers, emergency procedures, and special equipment.
5. Combination (C) endorsement: This endorsement is required for drivers who plan to operate combination vehicles (such as a bus towing another vehicle).
It's important to note that you may need additional endorsements or certifications depending on the type of passenger you plan to transport (such as children or people with disabilities).
1. Class B CDL: This license allows you to operate a single vehicle with a GVWR (Gross Vehicle Weight Rating) of 26,001 pounds or more, or a combination of vehicles with a GCWR (Gross Combination Weight Rating) of less than 26,001 pounds. This license also allows you to tow a trailer with a GVWR of less than 10,000 pounds.
2. Class A CDL: This license allows you to operate a combination of vehicles with a GCWR of 26,001 pounds or more, provided that the vehicle being towed has a GVWR of more than 10,000 pounds.
3. Passenger (P) endorsement: This endorsement is required for drivers who plan to transport passengers in vehicles designed to carry 16 or more passengers (including the driver). This includes buses designed for city transit, school buses, and commercial buses.
4. School Bus (S) endorsement: This endorsement is required for drivers who plan to operate a school bus. It includes additional training and testing on topics such as loading and unloading passengers, emergency procedures, and special equipment.
5. Combination (C) endorsement: This endorsement is required for drivers who plan to operate combination vehicles (such as a bus towing another vehicle).
It's important to note that you may need additional endorsements or certifications depending on the type of passenger you plan to transport (such as children or people with disabilities).
No, you cannot use your personal vehicle for the CDL Bus driving test in Texas. The vehicle used for the driving test must meet certain requirements, including being of the appropriate size and weight for the type of CDL license you are testing for.
For the CDL Bus driving test, you will need to use a bus that meets the Texas Department of Public Safety's (DPS) requirements. The bus must have:
1. A seating capacity of at least 16 passengers (including the driver)
2. A GVWR (Gross Vehicle Weight Rating) of at least 26,001 pounds
3. A valid inspection sticker
4. Proof of insurance
5. All required safety equipment (such as mirrors, lights, and horns)
You may be able to use a bus provided by a driver training school or your employer for the driving test. It's important to check with your training school or employer to see if they can provide a suitable vehicle for the test.
If you are unable to provide a suitable vehicle for the CDL Bus driving test in Texas, you may need to arrange to rent or borrow a suitable vehicle from a third-party provider that meets DPS requirements.
For the CDL Bus driving test, you will need to use a bus that meets the Texas Department of Public Safety's (DPS) requirements. The bus must have:
1. A seating capacity of at least 16 passengers (including the driver)
2. A GVWR (Gross Vehicle Weight Rating) of at least 26,001 pounds
3. A valid inspection sticker
4. Proof of insurance
5. All required safety equipment (such as mirrors, lights, and horns)
You may be able to use a bus provided by a driver training school or your employer for the driving test. It's important to check with your training school or employer to see if they can provide a suitable vehicle for the test.
If you are unable to provide a suitable vehicle for the CDL Bus driving test in Texas, you may need to arrange to rent or borrow a suitable vehicle from a third-party provider that meets DPS requirements.
Yes, there are specific skills and maneuvers that you will need to demonstrate during the CDL Bus driving test in Texas. The test is divided into three parts:
1. Pre-trip inspection: You will be required to perform a thorough pre-trip inspection of the bus, including checking the brakes, lights, tires, and other components.
2. Basic vehicle control: You will be required to demonstrate your ability to control the bus in a variety of situations, including straight line backing, offset backing, parallel parking, and alley docking.
3. Road test: You will be required to demonstrate your ability to safely operate the bus on public roads. This will include tasks such as turning, accelerating, decelerating, changing lanes, and merging with traffic.
During the test, you will be evaluated on your ability to safely operate the bus and follow traffic laws and regulations. You will also be evaluated on your ability to communicate effectively with other drivers and respond appropriately in emergency situations.
It's important to note that the CDL Bus driving test is a challenging and rigorous exam. It's recommended that you receive proper training from a reputable driver training school before attempting the test. This can help ensure that you are fully prepared for the exam and can help increase your chances of passing on your first attempt.
1. Pre-trip inspection: You will be required to perform a thorough pre-trip inspection of the bus, including checking the brakes, lights, tires, and other components.
2. Basic vehicle control: You will be required to demonstrate your ability to control the bus in a variety of situations, including straight line backing, offset backing, parallel parking, and alley docking.
3. Road test: You will be required to demonstrate your ability to safely operate the bus on public roads. This will include tasks such as turning, accelerating, decelerating, changing lanes, and merging with traffic.
During the test, you will be evaluated on your ability to safely operate the bus and follow traffic laws and regulations. You will also be evaluated on your ability to communicate effectively with other drivers and respond appropriately in emergency situations.
It's important to note that the CDL Bus driving test is a challenging and rigorous exam. It's recommended that you receive proper training from a reputable driver training school before attempting the test. This can help ensure that you are fully prepared for the exam and can help increase your chances of passing on your first attempt.
Yes, there are additional medical and physical requirements for a CDL Bus endorsement in Texas. In addition to meeting the general requirements for obtaining a CDL license, you must also meet certain medical and physical requirements to operate a bus.
The Federal Motor Carrier Safety Administration (FMCSA) sets the medical and physical requirements for commercial drivers, including bus drivers. To qualify for a CDL Bus endorsement, you must:
1. Have a valid medical examiner's certificate (also known as a DOT physical) that shows you are physically qualified to operate a commercial motor vehicle.
2. Meet certain vision requirements, including having at least 20/40 vision in each eye (with or without corrective lenses), and having a horizontal field of vision of at least 70 degrees in each eye.
3. Not have any disqualifying medical conditions, such as uncontrolled high blood pressure, epilepsy, or certain heart conditions.
4. Not be taking any medications that could impair your ability to drive safely.
It's important to note that these requirements are subject to change, so it's important to check with the Texas Department of Public Safety (DPS) or the FMCSA for the most up-to-date information before applying for a CDL Bus endorsement.
The Federal Motor Carrier Safety Administration (FMCSA) sets the medical and physical requirements for commercial drivers, including bus drivers. To qualify for a CDL Bus endorsement, you must:
1. Have a valid medical examiner's certificate (also known as a DOT physical) that shows you are physically qualified to operate a commercial motor vehicle.
2. Meet certain vision requirements, including having at least 20/40 vision in each eye (with or without corrective lenses), and having a horizontal field of vision of at least 70 degrees in each eye.
3. Not have any disqualifying medical conditions, such as uncontrolled high blood pressure, epilepsy, or certain heart conditions.
4. Not be taking any medications that could impair your ability to drive safely.
It's important to note that these requirements are subject to change, so it's important to check with the Texas Department of Public Safety (DPS) or the FMCSA for the most up-to-date information before applying for a CDL Bus endorsement.
No, you cannot legally transport passengers without a CDL Bus endorsement in Texas. A CDL Bus endorsement is required for anyone who drives a vehicle designed to transport 16 or more passengers (including the driver) for commercial purposes.
Driving a bus without a CDL Bus endorsement is a violation of federal and state law and can result in serious consequences, including fines, license suspension, or even criminal charges.
To obtain a CDL Bus endorsement in Texas, you must meet certain requirements, including passing knowledge and skills tests, meeting medical and physical requirements, and completing a driver training program. It's important to follow all the rules and regulations to ensure the safety of yourself, your passengers, and other drivers on the road.
Driving a bus without a CDL Bus endorsement is a violation of federal and state law and can result in serious consequences, including fines, license suspension, or even criminal charges.
To obtain a CDL Bus endorsement in Texas, you must meet certain requirements, including passing knowledge and skills tests, meeting medical and physical requirements, and completing a driver training program. It's important to follow all the rules and regulations to ensure the safety of yourself, your passengers, and other drivers on the road.
You can add the CDL Bus endorsement to your existing CDL license in Texas without applying for a new license. To obtain the CDL Bus endorsement, you will need to pass a knowledge test and a skills test that specifically covers passenger vehicle operation.
You can schedule an appointment for the knowledge and skills tests at a Texas Department of Public Safety (DPS) Driver License Office. You will also need to provide a valid medical examiner's certificate that shows you are physically qualified to operate a commercial motor vehicle.
Once you have passed the tests and provided the necessary documentation, the Texas DPS will add the CDL Bus endorsement to your existing CDL license.
It's important to note that there may be additional fees associated with adding the CDL Bus endorsement to your license. Check with the Texas DPS for specific information on fees and requirements.
You can schedule an appointment for the knowledge and skills tests at a Texas Department of Public Safety (DPS) Driver License Office. You will also need to provide a valid medical examiner's certificate that shows you are physically qualified to operate a commercial motor vehicle.
Once you have passed the tests and provided the necessary documentation, the Texas DPS will add the CDL Bus endorsement to your existing CDL license.
It's important to note that there may be additional fees associated with adding the CDL Bus endorsement to your license. Check with the Texas DPS for specific information on fees and requirements.
Yes, there are certain restrictions and limitations for drivers with a CDL Bus endorsement in Texas. These restrictions and limitations include:
1. Passenger limit: Drivers with a CDL Bus endorsement are limited to carrying a maximum of 16 or more passengers (including the driver) for commercial purposes.
2. Endorsement type: Drivers must have the appropriate endorsement on their CDL license to operate specific types of buses, such as school buses or double-decker buses.
3. Speed limit: In some cases, drivers of buses with a CDL Bus endorsement may be subject to lower speed limits than other vehicles on the road.
4. Hours of service: Drivers may be subject to federal and state regulations regarding hours of service, which limit the number of hours they can drive in a given day or week.
5. Drug and alcohol testing: Drivers with a CDL Bus endorsement are subject to random drug and alcohol testing, as well as pre-employment and post-accident testing.
It's important to follow all restrictions and limitations associated with your CDL Bus endorsement to ensure the safety of yourself, your passengers, and other drivers on the road.
1. Passenger limit: Drivers with a CDL Bus endorsement are limited to carrying a maximum of 16 or more passengers (including the driver) for commercial purposes.
2. Endorsement type: Drivers must have the appropriate endorsement on their CDL license to operate specific types of buses, such as school buses or double-decker buses.
3. Speed limit: In some cases, drivers of buses with a CDL Bus endorsement may be subject to lower speed limits than other vehicles on the road.
4. Hours of service: Drivers may be subject to federal and state regulations regarding hours of service, which limit the number of hours they can drive in a given day or week.
5. Drug and alcohol testing: Drivers with a CDL Bus endorsement are subject to random drug and alcohol testing, as well as pre-employment and post-accident testing.
It's important to follow all restrictions and limitations associated with your CDL Bus endorsement to ensure the safety of yourself, your passengers, and other drivers on the road.
