Tank
This endorsement is required to haul any liquid or gaseous materials in a tank or tanks having a capacity of 1,000 gallons or more that is either permanently or temporarily attached to the vehicle or chassis. To receive this endorsement, applicants must pass a test The test consists of 20 multiple choice questions. Each question has four answer choices. To pass, the applicant must answer at least 16questions correctly. Test questions come from the Texas Commercial Motor Vehicle Drivers Handbook. Questions come from chapters covering: Driving Safely, Combination Vehicles and Doubles and Triples. The Tank endorsement can be used with the Class A, B or C CDL.
Number of Question
Passing Score
1. If transporting chlorine, what must be kept in the vehicle?
Explanation
A driver transporting chlorine in cargo tanks must keep an approved gas mask and an emergency kit in their vehicle.
2. Accelerating roughly is:
Explanation
When accelerating, speed up smoothly and gradually so your vehicle does not jerk. Rough acceleration can cause mechanical damage.
3. When driving, it is important to:
Explanation
For safe driving, it is essential that you are aware of what is happening on all sides of your vehicle. In addition to watching the road ahead, you should frequently check your mirrors to monitor the road to the sides and to the rear of your vehicle.
4. A loss of air pressure in the emergency line will cause:
Explanation
The emergency air line controls the emergency brakes on a combination vehicle. A loss of air pressure in the emergency line will cause the emergency trailer brakes to activate.
5. Drivers are usually the least alert:
Explanation
Drivers are usually less alert when driving at night, especially after midnight.
6. Due to the risk of liquid surge in tanks, you should:
Explanation
Be aware of the risk of liquid surge when driving tanks transporting liquid cargo. To prevent the negative affects of surge on your driving, you should start, slow, and stop very smoothly.
7. When loading hazardous materials, you should do all of the following, except:
Explanation
When loading hazardous materials, do not use hooks or tools that could damage containers or other packaging.
Ranked by best match
Frequently Asked Questions
To obtain a CDL Tank endorsement in Texas, follow these steps:
1. Obtain a Commercial Driver's License (CDL): You must have a valid Texas CDL before applying for a Tank endorsement. To obtain a CDL, you must pass the required knowledge and skills tests for the class of vehicle you plan to operate.
2. Meet the eligibility requirements: You must be at least 18 years old and hold a valid Texas CDL to apply for a Tank endorsement. You must also pass a knowledge test on Tank vehicles and complete a skills test in a Tank vehicle.
3. Study for the Tank endorsement knowledge test: The Tank endorsement knowledge test covers topics such as proper loading, handling, and transporting of hazardous materials in Tank vehicles.
4. Schedule and pass the Tank endorsement knowledge test: You can schedule your knowledge test appointment online or by calling your local Texas Department of Public Safety (DPS) office.
5. Practice driving a Tank vehicle: Before taking the skills test, you should practice driving a Tank vehicle to become familiar with its handling and control.
6. Schedule and pass the Tank endorsement skills test: You can schedule your skills test appointment at your local DPS office. The skills test will evaluate your ability to safely operate a Tank vehicle and handle any hazardous materials that may be transported.
7. Pay the appropriate fees: There is a fee for adding the Tank endorsement to your CDL.
Once you have completed these steps, you will be issued a Texas CDL with a Tank endorsement, allowing you to legally operate Tank vehicles and transport hazardous materials.
1. Obtain a Commercial Driver's License (CDL): You must have a valid Texas CDL before applying for a Tank endorsement. To obtain a CDL, you must pass the required knowledge and skills tests for the class of vehicle you plan to operate.
2. Meet the eligibility requirements: You must be at least 18 years old and hold a valid Texas CDL to apply for a Tank endorsement. You must also pass a knowledge test on Tank vehicles and complete a skills test in a Tank vehicle.
3. Study for the Tank endorsement knowledge test: The Tank endorsement knowledge test covers topics such as proper loading, handling, and transporting of hazardous materials in Tank vehicles.
4. Schedule and pass the Tank endorsement knowledge test: You can schedule your knowledge test appointment online or by calling your local Texas Department of Public Safety (DPS) office.
5. Practice driving a Tank vehicle: Before taking the skills test, you should practice driving a Tank vehicle to become familiar with its handling and control.
6. Schedule and pass the Tank endorsement skills test: You can schedule your skills test appointment at your local DPS office. The skills test will evaluate your ability to safely operate a Tank vehicle and handle any hazardous materials that may be transported.
7. Pay the appropriate fees: There is a fee for adding the Tank endorsement to your CDL.
Once you have completed these steps, you will be issued a Texas CDL with a Tank endorsement, allowing you to legally operate Tank vehicles and transport hazardous materials.
To obtain a CDL Tank license in Texas, you must meet the following requirements:
1. Age: You must be at least 18 years old to apply for a CDL Tank license in Texas. However, you will be restricted to intrastate driving only until you turn 21 years old.
2. Valid Texas driver's license: You must hold a valid Texas driver's license.
3. Medical requirements: You must meet the medical requirements set by the Federal Motor Carrier Safety Administration (FMCSA) to obtain a CDL. This includes passing a medical exam and obtaining a medical examiner's certificate.
4. Obtain a CDL: You must first obtain a Commercial Driver's License (CDL) before applying for a Tank endorsement. To obtain a CDL, you must pass the required knowledge and skills tests for the class of vehicle you plan to operate.
5. Tank endorsement knowledge test: You must pass a knowledge test on Tank vehicles, which covers topics such as proper loading, handling, and transporting of hazardous materials in Tank vehicles.
6. Skills test: You must complete a skills test in a Tank vehicle, which evaluates your ability to safely operate the vehicle and handle any hazardous materials that may be transported.
7. Clean driving record: You must have a clean driving record with no serious traffic violations or drug or alcohol-related convictions within the past three years.
8. Background check: You will undergo a background check as part of the application process.
Once you have met these requirements and successfully completed the necessary tests, you will be issued a CDL with a Tank endorsement in Texas, which will allow you to legally operate Tank vehicles and transport hazardous materials.
1. Age: You must be at least 18 years old to apply for a CDL Tank license in Texas. However, you will be restricted to intrastate driving only until you turn 21 years old.
2. Valid Texas driver's license: You must hold a valid Texas driver's license.
3. Medical requirements: You must meet the medical requirements set by the Federal Motor Carrier Safety Administration (FMCSA) to obtain a CDL. This includes passing a medical exam and obtaining a medical examiner's certificate.
4. Obtain a CDL: You must first obtain a Commercial Driver's License (CDL) before applying for a Tank endorsement. To obtain a CDL, you must pass the required knowledge and skills tests for the class of vehicle you plan to operate.
5. Tank endorsement knowledge test: You must pass a knowledge test on Tank vehicles, which covers topics such as proper loading, handling, and transporting of hazardous materials in Tank vehicles.
6. Skills test: You must complete a skills test in a Tank vehicle, which evaluates your ability to safely operate the vehicle and handle any hazardous materials that may be transported.
7. Clean driving record: You must have a clean driving record with no serious traffic violations or drug or alcohol-related convictions within the past three years.
8. Background check: You will undergo a background check as part of the application process.
Once you have met these requirements and successfully completed the necessary tests, you will be issued a CDL with a Tank endorsement in Texas, which will allow you to legally operate Tank vehicles and transport hazardous materials.
Yes, you may need specific training or experience to obtain a CDL Tank endorsement in Texas. The Federal Motor Carrier Safety Administration (FMCSA) requires drivers who transport hazardous materials in Tank vehicles to complete specialized training.
To obtain a CDL Tank endorsement in Texas, you will need to complete a hazardous materials endorsement course that covers the safe handling and transportation of hazardous materials. The course also covers proper loading and unloading procedures, emergency response procedures, and the use of personal protective equipment.
Additionally, you may need to complete on-the-job training with a licensed Tank vehicle driver before taking the skills test. The FMCSA requires that drivers have at least three months of on-the-job experience operating a Tank vehicle before transporting hazardous materials.
It's important to note that some employers may require additional training or experience beyond the FMCSA requirements. It's always best to check with your employer or potential employer to determine their specific requirements.
To obtain a CDL Tank endorsement in Texas, you will need to complete a hazardous materials endorsement course that covers the safe handling and transportation of hazardous materials. The course also covers proper loading and unloading procedures, emergency response procedures, and the use of personal protective equipment.
Additionally, you may need to complete on-the-job training with a licensed Tank vehicle driver before taking the skills test. The FMCSA requires that drivers have at least three months of on-the-job experience operating a Tank vehicle before transporting hazardous materials.
It's important to note that some employers may require additional training or experience beyond the FMCSA requirements. It's always best to check with your employer or potential employer to determine their specific requirements.
Yes, there are additional written tests or exams that you will need to pass to obtain a CDL Tank endorsement in Texas.
In addition to passing the general knowledge test and the skills test for your CDL, you will need to pass a written test specific to the Tank endorsement. This written test covers topics such as:
1. The proper way to load and unload a Tank vehicle
2. How to safely operate a Tank vehicle
3. The proper way to handle hazardous materials
4. How to recognize and respond to emergencies involving hazardous materials
The written test for the Tank endorsement is separate from the general knowledge test and must be passed before you can take the skills test for the endorsement.
To prepare for the Tank endorsement written test, you can study the Texas Commercial Motor Vehicle Drivers Handbook, which includes information on operating a Tank vehicle and transporting hazardous materials. You may also consider taking a training course or using study materials provided by a reputable third-party provider.
In addition to passing the general knowledge test and the skills test for your CDL, you will need to pass a written test specific to the Tank endorsement. This written test covers topics such as:
1. The proper way to load and unload a Tank vehicle
2. How to safely operate a Tank vehicle
3. The proper way to handle hazardous materials
4. How to recognize and respond to emergencies involving hazardous materials
The written test for the Tank endorsement is separate from the general knowledge test and must be passed before you can take the skills test for the endorsement.
To prepare for the Tank endorsement written test, you can study the Texas Commercial Motor Vehicle Drivers Handbook, which includes information on operating a Tank vehicle and transporting hazardous materials. You may also consider taking a training course or using study materials provided by a reputable third-party provider.
The CDL Tank endorsement written test covers a range of topics related to the safe transportation of liquid or gaseous materials in Tank vehicles. Here are some of the main topics that are typically covered in the written test:
1. Tank Vehicle Inspection: This section covers the pre-trip inspection process for Tank vehicles, including checking for leaks, proper securement of the Tank, and ensuring valves and hoses are properly connected.
2. Safe Driving Practices: This section covers safe driving practices when operating a Tank vehicle, including maintaining a safe distance from other vehicles, avoiding sudden stops or turns, and using proper braking techniques.
3. Hazardous Materials: This section covers the proper handling and transportation of hazardous materials in Tank vehicles, including identifying hazardous materials placards and labels, using appropriate personal protective equipment (PPE), and understanding emergency response procedures.
4. Loading and Unloading: This section covers the proper loading and unloading procedures for Tank vehicles, including weight distribution, proper handling of hoses and valves, and ensuring that the product is properly secured during transport.
5. Emergency Situations: This section covers how to respond to emergency situations involving a Tank vehicle, including how to safely stop the vehicle in an emergency, how to respond to spills or leaks, and how to use fire extinguishers.
It's important to note that specific topics covered on the written test may vary depending on the state and testing location. Therefore, it's recommended that you review your state's CDL handbook or take a training course to ensure that you are adequately prepared for the test.
1. Tank Vehicle Inspection: This section covers the pre-trip inspection process for Tank vehicles, including checking for leaks, proper securement of the Tank, and ensuring valves and hoses are properly connected.
2. Safe Driving Practices: This section covers safe driving practices when operating a Tank vehicle, including maintaining a safe distance from other vehicles, avoiding sudden stops or turns, and using proper braking techniques.
3. Hazardous Materials: This section covers the proper handling and transportation of hazardous materials in Tank vehicles, including identifying hazardous materials placards and labels, using appropriate personal protective equipment (PPE), and understanding emergency response procedures.
4. Loading and Unloading: This section covers the proper loading and unloading procedures for Tank vehicles, including weight distribution, proper handling of hoses and valves, and ensuring that the product is properly secured during transport.
5. Emergency Situations: This section covers how to respond to emergency situations involving a Tank vehicle, including how to safely stop the vehicle in an emergency, how to respond to spills or leaks, and how to use fire extinguishers.
It's important to note that specific topics covered on the written test may vary depending on the state and testing location. Therefore, it's recommended that you review your state's CDL handbook or take a training course to ensure that you are adequately prepared for the test.
Yes, in addition to passing the CDL Tank endorsement written test, you will also need to pass a skills test to demonstrate your ability to safely operate a Tank vehicle. The skills test for the Tank endorsement includes a pre-trip inspection, basic vehicle control, and an on-road driving test.
Here are some of the specific skills and maneuvers you will need to demonstrate during the CDL Tank endorsement skills test:
1. Pre-trip Inspection: You will need to demonstrate your ability to conduct a thorough pre-trip inspection of your Tank vehicle. This includes checking the Tank for leaks, inspecting the hoses and valves, checking the brakes, and ensuring that the product is properly loaded and secured.
2. Basic Vehicle Control: You will need to demonstrate your ability to control your Tank vehicle in a variety of situations. This may include backing up, turning, and maneuvering through tight spaces.
3. On-road Driving Test: You will need to demonstrate your ability to safely operate your Tank vehicle on public roads and highways. This includes maintaining proper speed and following distance, merging onto highways, changing lanes, and making turns.
In addition to these skills and maneuvers, you may also be required to demonstrate your knowledge of emergency procedures related to the transportation of hazardous materials.
It's important to note that specific testing requirements may vary depending on the state and testing location. Therefore, it's recommended that you review your state's CDL handbook or take a training course to ensure that you are adequately prepared for the skills test.
Here are some of the specific skills and maneuvers you will need to demonstrate during the CDL Tank endorsement skills test:
1. Pre-trip Inspection: You will need to demonstrate your ability to conduct a thorough pre-trip inspection of your Tank vehicle. This includes checking the Tank for leaks, inspecting the hoses and valves, checking the brakes, and ensuring that the product is properly loaded and secured.
2. Basic Vehicle Control: You will need to demonstrate your ability to control your Tank vehicle in a variety of situations. This may include backing up, turning, and maneuvering through tight spaces.
3. On-road Driving Test: You will need to demonstrate your ability to safely operate your Tank vehicle on public roads and highways. This includes maintaining proper speed and following distance, merging onto highways, changing lanes, and making turns.
In addition to these skills and maneuvers, you may also be required to demonstrate your knowledge of emergency procedures related to the transportation of hazardous materials.
It's important to note that specific testing requirements may vary depending on the state and testing location. Therefore, it's recommended that you review your state's CDL handbook or take a training course to ensure that you are adequately prepared for the skills test.
Yes, there are some restrictions and limitations for drivers with a CDL Tank endorsement. These restrictions are in place to ensure that drivers have the necessary skills and knowledge to safely operate Tank vehicles.
Here are some of the common restrictions for drivers with a CDL Tank endorsement:
1. Endorsement-specific restrictions: Some states may place specific restrictions on Tank endorsements, such as limiting the types of materials that can be transported or the size of the Tank vehicle that can be operated.
2. Age restrictions: In most states, drivers must be at least 21 years old to obtain a CDL with a Tank endorsement. In some cases, drivers between the ages of 18 and 20 may be able to obtain a CDL with a Tank endorsement if they meet certain requirements.
3. Training requirements: Drivers with a CDL Tank endorsement must undergo specialized training related to the safe operation of Tank vehicles. This training may include classroom instruction, hands-on training, and supervised driving practice.
4. Medical requirements: Drivers with a CDL Tank endorsement must meet certain medical requirements to ensure that they are physically able to safely operate a Tank vehicle. This may include regular medical exams and certification from a qualified medical professional.
5. Hazmat background check: Drivers with a CDL Tank endorsement who transport hazardous materials must undergo a background check and obtain a hazardous materials endorsement (HME) in addition to their Tank endorsement.
It's important to note that specific restrictions and limitations may vary depending on the state and testing location. Therefore, it's recommended that you review your state's CDL handbook or consult with your state's Department of Motor Vehicles (DMV) for more information.
Here are some of the common restrictions for drivers with a CDL Tank endorsement:
1. Endorsement-specific restrictions: Some states may place specific restrictions on Tank endorsements, such as limiting the types of materials that can be transported or the size of the Tank vehicle that can be operated.
2. Age restrictions: In most states, drivers must be at least 21 years old to obtain a CDL with a Tank endorsement. In some cases, drivers between the ages of 18 and 20 may be able to obtain a CDL with a Tank endorsement if they meet certain requirements.
3. Training requirements: Drivers with a CDL Tank endorsement must undergo specialized training related to the safe operation of Tank vehicles. This training may include classroom instruction, hands-on training, and supervised driving practice.
4. Medical requirements: Drivers with a CDL Tank endorsement must meet certain medical requirements to ensure that they are physically able to safely operate a Tank vehicle. This may include regular medical exams and certification from a qualified medical professional.
5. Hazmat background check: Drivers with a CDL Tank endorsement who transport hazardous materials must undergo a background check and obtain a hazardous materials endorsement (HME) in addition to their Tank endorsement.
It's important to note that specific restrictions and limitations may vary depending on the state and testing location. Therefore, it's recommended that you review your state's CDL handbook or consult with your state's Department of Motor Vehicles (DMV) for more information.
No, you cannot transport liquid or gas materials without a CDL Tank endorsement. In order to transport these types of materials, you must have a CDL with a Tank endorsement.
The Tank endorsement is required for any driver who operates a commercial vehicle with a Tank that has a capacity of 1,000 gallons or more and is used to transport any type of liquid or gas materials. This includes vehicles used to transport water, milk, fuel, chemicals, gases, and other hazardous materials.
It's important to note that the Tank endorsement is in addition to the CDL license itself. In order to obtain a CDL Tank endorsement, you must pass both a written test and a skills test that are specific to the safe operation of Tank vehicles.
If you are caught transporting liquid or gas materials without the proper endorsements, you may face fines and penalties, as well as suspension or revocation of your CDL license. Therefore, it's important to ensure that you have the proper endorsements before transporting any type of hazardous materials.
The Tank endorsement is required for any driver who operates a commercial vehicle with a Tank that has a capacity of 1,000 gallons or more and is used to transport any type of liquid or gas materials. This includes vehicles used to transport water, milk, fuel, chemicals, gases, and other hazardous materials.
It's important to note that the Tank endorsement is in addition to the CDL license itself. In order to obtain a CDL Tank endorsement, you must pass both a written test and a skills test that are specific to the safe operation of Tank vehicles.
If you are caught transporting liquid or gas materials without the proper endorsements, you may face fines and penalties, as well as suspension or revocation of your CDL license. Therefore, it's important to ensure that you have the proper endorsements before transporting any type of hazardous materials.
Yes, you can add the CDL Tank endorsement to your existing CDL license. You do not need to apply for a new license if you want to obtain a Tank endorsement.
In order to add the Tank endorsement to your existing CDL license, you will need to pass both a written knowledge test and a skills test that are specific to the safe operation of Tank vehicles. You may also need to meet other requirements, such as age and medical requirements, depending on your state's regulations.
To add the Tank endorsement to your CDL license, you will need to visit your state's Department of Motor Vehicles (DMV) office and complete the necessary application and testing process. You may also need to pay an additional fee for the endorsement.
It's important to note that the requirements and procedures for adding endorsements may vary depending on your state. Therefore, it's recommended that you review your state's CDL handbook or consult with your state's DMV for specific information and guidance on how to add a Tank endorsement to your CDL license.
In order to add the Tank endorsement to your existing CDL license, you will need to pass both a written knowledge test and a skills test that are specific to the safe operation of Tank vehicles. You may also need to meet other requirements, such as age and medical requirements, depending on your state's regulations.
To add the Tank endorsement to your CDL license, you will need to visit your state's Department of Motor Vehicles (DMV) office and complete the necessary application and testing process. You may also need to pay an additional fee for the endorsement.
It's important to note that the requirements and procedures for adding endorsements may vary depending on your state. Therefore, it's recommended that you review your state's CDL handbook or consult with your state's DMV for specific information and guidance on how to add a Tank endorsement to your CDL license.
Yes, there are specific requirements and regulations for handling hazardous materials with a CDL Tank endorsement in Texas. These requirements are in place to ensure the safe transportation of hazardous materials and protect both the driver and the public.
Some of the requirements for handling hazardous materials with a CDL Tank endorsement include:
1. Specialized training: Drivers must complete specialized training related to the transportation of hazardous materials, including topics such as handling, loading, unloading, and emergency response.
2. Vehicle marking and placarding: Tank vehicles transporting hazardous materials must be marked and placarded with appropriate warning signs to indicate the type of material being transported.
3. Route restrictions: Certain roads or areas may be restricted for the transportation of certain types of hazardous materials. Drivers must be aware of these restrictions and plan their routes accordingly.
4. Emergency response planning: Drivers must have an emergency response plan in place in case of an accident or spill involving hazardous materials.
5. Record keeping: Drivers are required to keep detailed records related to their transportation of hazardous materials, including bills of lading, shipping papers, and other documentation.
These are just some of the requirements and regulations related to the transportation of hazardous materials with a CDL Tank endorsement in Texas. It's important for drivers to understand all applicable regulations and comply with them at all times to ensure safety on the road.
Some of the requirements for handling hazardous materials with a CDL Tank endorsement include:
1. Specialized training: Drivers must complete specialized training related to the transportation of hazardous materials, including topics such as handling, loading, unloading, and emergency response.
2. Vehicle marking and placarding: Tank vehicles transporting hazardous materials must be marked and placarded with appropriate warning signs to indicate the type of material being transported.
3. Route restrictions: Certain roads or areas may be restricted for the transportation of certain types of hazardous materials. Drivers must be aware of these restrictions and plan their routes accordingly.
4. Emergency response planning: Drivers must have an emergency response plan in place in case of an accident or spill involving hazardous materials.
5. Record keeping: Drivers are required to keep detailed records related to their transportation of hazardous materials, including bills of lading, shipping papers, and other documentation.
These are just some of the requirements and regulations related to the transportation of hazardous materials with a CDL Tank endorsement in Texas. It's important for drivers to understand all applicable regulations and comply with them at all times to ensure safety on the road.
