Passenger
To receive this endorsement, applicants must pass a test consisting of 20 multiple choice questions. Each question has two, three or four answer choices. To pass, the applicant must answer at least 16 questions correctly. Test questions come from the Utah Commercial Driver License Handbook. Questions come from chapters covering: Driving Safely, Transporting Passengers Safely, Pre-Trip Vehicle Inspection Test, Basic Vehicle Control Skills Test and On-Road Driving. The Passenger endorsement can be used with the Class A, B or C CDL.
Number of Question
Passing Score
1. If something is found to be unsafe during a pre-trip inspection, you should:
Explanation
If a pre-trip inspection reveals anything unsafe about your vehicle, you must get it repaired. It is illegal to operate an unsafe vehicle.
2. To avoid a hazard:
Explanation
In some emergencies, the best strategy for avoiding a hazard may be to drive onto the shoulder. Most shoulders are strong enough to support the weight of a large vehicle.
3. When using a fire extinguisher on a fire, you should:
Explanation
When using a fire extinguisher, you should stay as far away from the flames as possible and aim at the base of the fire.
4. When going downhill, switching into a lower gear is an effective way to slow a vehicle.
Explanation
On a steep downgrade, you must use the engine's braking effect as your primary method of speed control. Be sure to decelerate and downshift appropriately before beginning to drive down the hill.
5. Fueling a bus while passengers are on board is:
Explanation
A bus should not be refueled while passengers are on board unless it is absolutely necessary to do so. In particular, a bus with riders on board should never be refueled inside an enclosed building.
6. Truck tractors with air brakes built on or after March 1, 1997 must be equipped with:
Explanation
Truck tractors with air brakes built on or after March 1, 1997 must be equipped with an Anti-Lock Braking System (ABS).
7. When applying your brakes, the vehicle should:
Explanation
Your vehicle pulling to one side or the other while you are braking can indicate trouble with the brakes.
Ranked by best match
Frequently Asked Questions
To obtain a CDL passenger endorsement in Utah, you will need to follow these steps:
1. Obtain a Utah CDL: You must have a valid Utah Commercial Driver's License (CDL) to apply for a passenger endorsement.
2. Gather required documents: You will need to provide proof of identity, residency, and social security number. You may also be required to submit medical certification.
3. Pass the knowledge test: You must pass the passenger endorsement knowledge test. This test covers topics such as loading and unloading passengers, emergency procedures, and safe driving practices.
4. Pass the skills test: You must also pass a skills test that includes a pre-trip inspection, basic control skills, and an on-road test.
5. Pay the fee: There is a fee for adding the passenger endorsement to your CDL.
6. Submit your application: Once you have passed the knowledge and skills tests and paid the fee, you can submit your application for the passenger endorsement with the Utah Department of Public Safety.
7. Receive your endorsement: If your application is approved, you will receive your passenger endorsement on your Utah CDL.
1. Obtain a Utah CDL: You must have a valid Utah Commercial Driver's License (CDL) to apply for a passenger endorsement.
2. Gather required documents: You will need to provide proof of identity, residency, and social security number. You may also be required to submit medical certification.
3. Pass the knowledge test: You must pass the passenger endorsement knowledge test. This test covers topics such as loading and unloading passengers, emergency procedures, and safe driving practices.
4. Pass the skills test: You must also pass a skills test that includes a pre-trip inspection, basic control skills, and an on-road test.
5. Pay the fee: There is a fee for adding the passenger endorsement to your CDL.
6. Submit your application: Once you have passed the knowledge and skills tests and paid the fee, you can submit your application for the passenger endorsement with the Utah Department of Public Safety.
7. Receive your endorsement: If your application is approved, you will receive your passenger endorsement on your Utah CDL.
To obtain a CDL Passenger license in Utah, you must meet the following requirements:
1. Age: You must be at least 21 years old to operate a commercial vehicle across state lines or to transport passengers.
2. Valid Driver's License: You must have a valid driver's license issued by the state of Utah.
3. Medical Certification: You must provide proof of medical certification by a licensed medical examiner. This certification must be updated every two years.
4. CDL Permit: You must obtain a CDL permit by passing the general knowledge test and any applicable endorsement tests (such as air brakes or hazardous materials).
5. Training: You must complete training from an approved commercial driver training school or through an employer-sponsored training program.
6. Pass Knowledge and Skills Tests: You must pass both the knowledge and skills tests for the passenger endorsement.
7. Background Check: You will be required to undergo a background check, including a criminal history check, before being issued your CDL Passenger license.
Note that these requirements may vary depending on your specific circumstances and the type of vehicle you will be operating. It is recommended that you consult with the Utah Department of Public Safety for more information on obtaining a CDL Passenger license.
1. Age: You must be at least 21 years old to operate a commercial vehicle across state lines or to transport passengers.
2. Valid Driver's License: You must have a valid driver's license issued by the state of Utah.
3. Medical Certification: You must provide proof of medical certification by a licensed medical examiner. This certification must be updated every two years.
4. CDL Permit: You must obtain a CDL permit by passing the general knowledge test and any applicable endorsement tests (such as air brakes or hazardous materials).
5. Training: You must complete training from an approved commercial driver training school or through an employer-sponsored training program.
6. Pass Knowledge and Skills Tests: You must pass both the knowledge and skills tests for the passenger endorsement.
7. Background Check: You will be required to undergo a background check, including a criminal history check, before being issued your CDL Passenger license.
Note that these requirements may vary depending on your specific circumstances and the type of vehicle you will be operating. It is recommended that you consult with the Utah Department of Public Safety for more information on obtaining a CDL Passenger license.
Yes, you will need specific training and experience to obtain a CDL Passenger endorsement in Utah.
As per the Federal Motor Carrier Safety Administration (FMCSA), you must complete a training program that includes both classroom instruction and behind-the-wheel training. The program must cover the following topics:
1. Pre-trip vehicle inspection
2. Loading and unloading passengers
3. Proper use of emergency exits and equipment
4. Safe driving practices, including defensive driving techniques
5. Basic control skills, such as backing and turning
6. On-road driving skills
You can complete this training through an approved commercial driver training school or through an employer-sponsored training program. After completing the training, you will need to pass both a knowledge test and a skills test to obtain your CDL Passenger endorsement.
It's important to note that the requirements for obtaining a CDL Passenger endorsement may vary depending on the type of vehicle you will be operating. It is recommended that you consult with the Utah Department of Public Safety for more information on specific requirements for your situation.
As per the Federal Motor Carrier Safety Administration (FMCSA), you must complete a training program that includes both classroom instruction and behind-the-wheel training. The program must cover the following topics:
1. Pre-trip vehicle inspection
2. Loading and unloading passengers
3. Proper use of emergency exits and equipment
4. Safe driving practices, including defensive driving techniques
5. Basic control skills, such as backing and turning
6. On-road driving skills
You can complete this training through an approved commercial driver training school or through an employer-sponsored training program. After completing the training, you will need to pass both a knowledge test and a skills test to obtain your CDL Passenger endorsement.
It's important to note that the requirements for obtaining a CDL Passenger endorsement may vary depending on the type of vehicle you will be operating. It is recommended that you consult with the Utah Department of Public Safety for more information on specific requirements for your situation.
Yes, there are additional written tests that you must pass to obtain a CDL Passenger endorsement in Utah.
In addition to the general knowledge test, you must pass a Passenger Transport endorsement test. This test will cover topics specific to the safe operation of passenger-carrying vehicles, including:
1. Loading and unloading passengers
2. Proper use of emergency exits and equipment
3. Handling and transporting hazardous materials, if applicable
4. Proper use of mirrors and other safety equipment
5. Passenger management and communication skills
6. Safe driving practices, including defensive driving techniques
You may also be required to take additional endorsement tests depending on the type of vehicle you will be operating, such as air brakes or a combination of vehicles.
It's important to note that you must pass both the knowledge test and the skills test for the Passenger Transport endorsement in order to obtain your CDL Passenger license.
It is recommended that you study the Utah Commercial Driver License Handbook and take practice tests before taking the actual tests. The handbook can be found on the Utah Department of Public Safety website, and practice tests are available online or through approved commercial driver training schools.
In addition to the general knowledge test, you must pass a Passenger Transport endorsement test. This test will cover topics specific to the safe operation of passenger-carrying vehicles, including:
1. Loading and unloading passengers
2. Proper use of emergency exits and equipment
3. Handling and transporting hazardous materials, if applicable
4. Proper use of mirrors and other safety equipment
5. Passenger management and communication skills
6. Safe driving practices, including defensive driving techniques
You may also be required to take additional endorsement tests depending on the type of vehicle you will be operating, such as air brakes or a combination of vehicles.
It's important to note that you must pass both the knowledge test and the skills test for the Passenger Transport endorsement in order to obtain your CDL Passenger license.
It is recommended that you study the Utah Commercial Driver License Handbook and take practice tests before taking the actual tests. The handbook can be found on the Utah Department of Public Safety website, and practice tests are available online or through approved commercial driver training schools.
Yes, there are specific skills and maneuvers that you will need to demonstrate during the CDL Passenger endorsement skills test in Utah.
During the skills test, you will be evaluated on your ability to safely operate a passenger-carrying vehicle. The test will include the following maneuvers:
1. Pre-trip inspection: You will need to perform a thorough inspection of your vehicle and identify any potential safety hazards or maintenance issues.
2. Basic control skills: You will need to demonstrate your ability to control the vehicle in a variety of situations, such as backing up, turning, and maneuvering in tight spaces.
3. On-road driving: You will need to demonstrate your ability to safely operate the vehicle on public roads and highways, including merging, changing lanes, and navigating intersections.
In addition to these general driving skills, you may also be required to demonstrate specific skills related to the type of passenger-carrying vehicle you will be operating. For example, if you will be operating a bus with air brakes, you will need to demonstrate your ability to safely operate the air brakes.
It's important to note that the CDL Passenger endorsement skills test is more rigorous than the standard CDL skills test, as it includes additional maneuvers and requires a higher level of skill and knowledge. It is recommended that you practice extensively before taking the test and consider taking additional training if needed.
During the skills test, you will be evaluated on your ability to safely operate a passenger-carrying vehicle. The test will include the following maneuvers:
1. Pre-trip inspection: You will need to perform a thorough inspection of your vehicle and identify any potential safety hazards or maintenance issues.
2. Basic control skills: You will need to demonstrate your ability to control the vehicle in a variety of situations, such as backing up, turning, and maneuvering in tight spaces.
3. On-road driving: You will need to demonstrate your ability to safely operate the vehicle on public roads and highways, including merging, changing lanes, and navigating intersections.
In addition to these general driving skills, you may also be required to demonstrate specific skills related to the type of passenger-carrying vehicle you will be operating. For example, if you will be operating a bus with air brakes, you will need to demonstrate your ability to safely operate the air brakes.
It's important to note that the CDL Passenger endorsement skills test is more rigorous than the standard CDL skills test, as it includes additional maneuvers and requires a higher level of skill and knowledge. It is recommended that you practice extensively before taking the test and consider taking additional training if needed.
No, you cannot transport passengers for hire without a CDL Passenger endorsement in Utah. The Passenger endorsement is required if you will be operating a commercial vehicle designed to transport 16 or more passengers, including the driver.
It is important to note that the Passenger endorsement is not required if you are operating a vehicle for personal use or for non-commercial purposes, such as a recreational vehicle or a church bus.
However, if you are driving a commercial vehicle designed to carry fewer than 16 passengers for hire, you may still need to obtain a CDL with other endorsements, such as the School Bus endorsement or the Hazardous Materials endorsement, depending on the nature of the cargo you will be carrying.
It's important to follow all Utah laws and regulations related to commercial driving and obtain the proper endorsements before operating a commercial vehicle. Violations can result in fines, license suspension or revocation, and other penalties.
It is important to note that the Passenger endorsement is not required if you are operating a vehicle for personal use or for non-commercial purposes, such as a recreational vehicle or a church bus.
However, if you are driving a commercial vehicle designed to carry fewer than 16 passengers for hire, you may still need to obtain a CDL with other endorsements, such as the School Bus endorsement or the Hazardous Materials endorsement, depending on the nature of the cargo you will be carrying.
It's important to follow all Utah laws and regulations related to commercial driving and obtain the proper endorsements before operating a commercial vehicle. Violations can result in fines, license suspension or revocation, and other penalties.
Yes, you can add the CDL Passenger endorsement to your existing CDL license. In Utah, you will need to pass the CDL Passenger endorsement knowledge test and the skills test, and pay the required fees to add this endorsement to your CDL.
To apply for the CDL Passenger endorsement, you can visit a Utah Department of Public Safety (DPS) Driver License Office and complete the following steps:
1. Provide proof of identity and residency.
2. Pass a vision test.
3. Self-certify your driving type.
4. Pass the CDL Passenger endorsement knowledge test.
5. Schedule and pass the CDL Passenger endorsement skills test.
6. Pay the required fees for adding the Passenger endorsement to your CDL.
It's important to note that adding a new endorsement to your CDL may also require additional training or certification, depending on the type of vehicle you will be operating and the nature of your cargo or passengers.
Once you have completed all the necessary requirements, your driver's license will be updated to reflect your new endorsement, allowing you to legally operate a commercial vehicle designed to transport 16 or more passengers in Utah.
To apply for the CDL Passenger endorsement, you can visit a Utah Department of Public Safety (DPS) Driver License Office and complete the following steps:
1. Provide proof of identity and residency.
2. Pass a vision test.
3. Self-certify your driving type.
4. Pass the CDL Passenger endorsement knowledge test.
5. Schedule and pass the CDL Passenger endorsement skills test.
6. Pay the required fees for adding the Passenger endorsement to your CDL.
It's important to note that adding a new endorsement to your CDL may also require additional training or certification, depending on the type of vehicle you will be operating and the nature of your cargo or passengers.
Once you have completed all the necessary requirements, your driver's license will be updated to reflect your new endorsement, allowing you to legally operate a commercial vehicle designed to transport 16 or more passengers in Utah.
Yes, there are some restrictions and limitations that apply to drivers with a CDL Passenger endorsement in Utah. These restrictions are in place to help ensure the safety of passengers and other road users.
Some of the key restrictions and limitations for drivers with a CDL Passenger endorsement in Utah include:
1. Age Limit: Drivers must be at least 21 years old to operate a commercial vehicle designed to transport 16 or more passengers, including the driver.
2. Passenger Limit: Drivers with a CDL Passenger endorsement are limited to carrying 16 or more passengers, including the driver.
3. Hours of Service: Drivers must comply with Federal Motor Carrier Safety Administration (FMCSA) regulations regarding hours of service, which limit the number of hours a driver can be on duty and require rest breaks.
4. Drug and Alcohol Testing: Drivers must comply with FMCSA drug and alcohol testing requirements, including pre-employment testing, random testing, and post-accident testing.
5. Medical Requirements: Drivers must meet certain medical requirements to maintain their CDL Passenger endorsement, including passing a medical exam every two years.
It's important for drivers with a CDL Passenger endorsement to understand and comply with these restrictions and limitations to avoid fines, license suspension or revocation, and other penalties.
Some of the key restrictions and limitations for drivers with a CDL Passenger endorsement in Utah include:
1. Age Limit: Drivers must be at least 21 years old to operate a commercial vehicle designed to transport 16 or more passengers, including the driver.
2. Passenger Limit: Drivers with a CDL Passenger endorsement are limited to carrying 16 or more passengers, including the driver.
3. Hours of Service: Drivers must comply with Federal Motor Carrier Safety Administration (FMCSA) regulations regarding hours of service, which limit the number of hours a driver can be on duty and require rest breaks.
4. Drug and Alcohol Testing: Drivers must comply with FMCSA drug and alcohol testing requirements, including pre-employment testing, random testing, and post-accident testing.
5. Medical Requirements: Drivers must meet certain medical requirements to maintain their CDL Passenger endorsement, including passing a medical exam every two years.
It's important for drivers with a CDL Passenger endorsement to understand and comply with these restrictions and limitations to avoid fines, license suspension or revocation, and other penalties.
Yes, there are age requirements and restrictions for obtaining a CDL Passenger endorsement in Utah.
In Utah, you must be at least 18 years old to obtain a CDL, but you must be at least 21 years old to operate a commercial vehicle designed to transport 16 or more passengers, which includes the driver. This means that you must be at least 21 years old to obtain a CDL Passenger endorsement.
Additionally, to obtain a CDL Passenger endorsement in Utah, you must already hold a valid CDL and meet the other requirements for obtaining the endorsement, such as passing the CDL Passenger endorsement knowledge and skills tests and meeting medical requirements.
It's important to note that while the age requirement for obtaining a CDL Passenger endorsement is 21 years old in Utah, individual employers may have their own age requirements for drivers who operate commercial vehicles. It's always a good idea to check with potential employers before pursuing a career as a commercial driver.
In Utah, you must be at least 18 years old to obtain a CDL, but you must be at least 21 years old to operate a commercial vehicle designed to transport 16 or more passengers, which includes the driver. This means that you must be at least 21 years old to obtain a CDL Passenger endorsement.
Additionally, to obtain a CDL Passenger endorsement in Utah, you must already hold a valid CDL and meet the other requirements for obtaining the endorsement, such as passing the CDL Passenger endorsement knowledge and skills tests and meeting medical requirements.
It's important to note that while the age requirement for obtaining a CDL Passenger endorsement is 21 years old in Utah, individual employers may have their own age requirements for drivers who operate commercial vehicles. It's always a good idea to check with potential employers before pursuing a career as a commercial driver.
With a CDL Passenger endorsement, you are authorized to operate commercial motor vehicles designed to transport 16 or more passengers, including the driver. These vehicles are commonly referred to as "passenger vehicles" and include:
1. Buses: This includes city buses, school buses, and long-distance buses.
2. Vans: This includes passenger vans used for transportation services, such as airport shuttles or hotel shuttles.
3. Limousines: This includes luxury limousines used for special events, such as weddings or proms.
4. Tourist vehicles: This includes tour buses or other vehicles designed for sightseeing tours and other leisure activities.
It's important to note that while a CDL Passenger endorsement allows you to operate these types of vehicles, there may be additional endorsements or requirements needed for certain specialized passenger vehicles, such as those designed for hazardous materials transport or double-decker buses. It's always a good idea to check with your employer or the Utah Department of Public Safety for specific requirements related to the type of vehicle you will be operating.
1. Buses: This includes city buses, school buses, and long-distance buses.
2. Vans: This includes passenger vans used for transportation services, such as airport shuttles or hotel shuttles.
3. Limousines: This includes luxury limousines used for special events, such as weddings or proms.
4. Tourist vehicles: This includes tour buses or other vehicles designed for sightseeing tours and other leisure activities.
It's important to note that while a CDL Passenger endorsement allows you to operate these types of vehicles, there may be additional endorsements or requirements needed for certain specialized passenger vehicles, such as those designed for hazardous materials transport or double-decker buses. It's always a good idea to check with your employer or the Utah Department of Public Safety for specific requirements related to the type of vehicle you will be operating.
