Knowledge Test Class A
This license is required for driving any legal combination of vehicles, with a gross combination weight rating of 26,001 pounds or more, provided the GVWR of a trailer exceeds 10,000 pounds. To receive this license, applicants must pass a 70-question test. Test questions come from the New York State Commercial Motor Vehicle Drivers Handbook. Each question has four answer choices. To pass, applicants must answer 56 questions correctly. Questions come from chapters covering: Introduction, Driving Safely, Transporting Cargo Safely, Air Brakes (if applicable), Combination Vehicles, Pre-Trip Vehicle Inspection Test, Basic Vehicle Control Skills Test and On-Road Driving. Endorsements that may be used with a Class A CDL are: Hazardous materials, Tank, Passenger, Doubles/Triples, HazMat, Tank, Air Brakes and School bus.
Number of Question
Passing Score
1. What is removed when an air tank is drained?
Explanation
In an air brake system, the air storage tanks are equipped with drains to allow water and compressor oil to be removed. The water and oil can damage the brakes if left to accumulate in the system.
2. When a construction worker is close to the road, you should:
Explanation
In construction zones, do not exceed the posted safe sped limit. Slow down even more when workers are near the roadway.
3. What is the maximum fine for driving a CMV without a CDL?
Explanation
You can be fined between $75 and $300 for driving a commercial motor vehicle without the appropriate license.
4. Distracted drivers may be:
Explanation
You may be able to tell that another driver is distracted if you can see them drifting within a lane or across lane dividers; traveling at inconsistent speeds; being preoccupied with a cell phone, a map, food, or other items; or engaging in conversation with passengers.
5. When conducting a vehicle inspection, you will need to identify all of the following, except:
Explanation
During the vehicle inspection test, you must check the power steering belt, water pump belt, alternator belt, and air compressor belt for snugness, cracks, or frays. If any of these components are not belt-driven, you must tell the examiner which one(s), and verify that they are operating properly, mounted securely, and not damaged or leaking.
6. A vehicle equipped with an Anti-Lock Braking System (ABS) can be identified by:
Explanation
You can tell that your vehicle is equipped with an Anti-Lock Braking System (ABS) if it has a yellow ABS malfunction lamp on the instrument panel.
7. While operating a CMV:
Explanation
A safety belt is your best defense in the event of a collision. You must always wear a safety belt while operating a CMV.
Ranked by best match
Frequently Asked Questions
A Class A CDL (Commercial Driver's License) is a type of license that allows drivers to operate a combination of vehicles with a total weight of 26,001 pounds or more. This includes vehicles such as tractor-trailers, tanker trucks, and livestock carriers. In New York, a Class A CDL also allows drivers to operate vehicles in Class B and C categories.
To obtain a Class A CDL in New York, drivers must pass a written knowledge test, a pre-trip inspection test, and a skills test that includes an on-road driving portion. Additionally, applicants must meet certain medical and residency requirements and provide proof of their identity and Social Security number.
To obtain a Class A CDL in New York, drivers must pass a written knowledge test, a pre-trip inspection test, and a skills test that includes an on-road driving portion. Additionally, applicants must meet certain medical and residency requirements and provide proof of their identity and Social Security number.
With a Class A CDL in New York, you can operate the following types of vehicles:
1. Combination vehicles with a total weight of 26,001 pounds or more, provided the vehicle being towed weighs more than 10,000 pounds.
2. Tractor-trailers: A combination of a tractor unit and one or more semi-trailers.
3. Livestock carriers: Vehicles designed and used for transporting livestock.
4. Tanker trucks: Vehicles designed and used for transporting liquids or gases in bulk.
5. Flatbeds: Vehicles with an open flatbed that can be used to transport various types of cargo.
6. Dump trucks: Vehicles designed and used for transporting loose materials, such as sand or gravel.
It's important to note that additional endorsements may be required to operate certain types of vehicles, such as Hazmat (H) or Tank (T) endorsements for tanker trucks carrying hazardous materials.
1. Combination vehicles with a total weight of 26,001 pounds or more, provided the vehicle being towed weighs more than 10,000 pounds.
2. Tractor-trailers: A combination of a tractor unit and one or more semi-trailers.
3. Livestock carriers: Vehicles designed and used for transporting livestock.
4. Tanker trucks: Vehicles designed and used for transporting liquids or gases in bulk.
5. Flatbeds: Vehicles with an open flatbed that can be used to transport various types of cargo.
6. Dump trucks: Vehicles designed and used for transporting loose materials, such as sand or gravel.
It's important to note that additional endorsements may be required to operate certain types of vehicles, such as Hazmat (H) or Tank (T) endorsements for tanker trucks carrying hazardous materials.
To obtain a Class A CDL license in New York, you must meet the following requirements:
1. Age: You must be at least 18 years old to operate a commercial vehicle within New York State and at least 21 years old to operate a commercial vehicle outside of New York State.
2. Medical Fitness: You must be medically fit to drive a commercial vehicle. This involves passing a medical examination and obtaining a medical examiner’s certificate.
3. Knowledge Test: You must pass a written knowledge test that covers topics such as vehicle inspection, driving safety, and transporting cargo.
4. Commercial Learner's Permit (CLP): You must obtain a CLP by passing a written test and a pre-trip inspection test before you can take the skills test.
5. Skills Test: You must pass a skills test that includes an on-road driving portion and covers various aspects of commercial driving, such as backing up, turning, and shifting gears.
6. Residency: You must be a resident of New York State or have proof of legal presence in the U.S.
7. Identification: You must provide proof of your identity, Social Security number, and residency or legal presence.
It's important to note that additional endorsements may be required for certain types of vehicles or cargo, such as Hazmat (H) or Tank (T) endorsements for tanker trucks carrying hazardous materials.
1. Age: You must be at least 18 years old to operate a commercial vehicle within New York State and at least 21 years old to operate a commercial vehicle outside of New York State.
2. Medical Fitness: You must be medically fit to drive a commercial vehicle. This involves passing a medical examination and obtaining a medical examiner’s certificate.
3. Knowledge Test: You must pass a written knowledge test that covers topics such as vehicle inspection, driving safety, and transporting cargo.
4. Commercial Learner's Permit (CLP): You must obtain a CLP by passing a written test and a pre-trip inspection test before you can take the skills test.
5. Skills Test: You must pass a skills test that includes an on-road driving portion and covers various aspects of commercial driving, such as backing up, turning, and shifting gears.
6. Residency: You must be a resident of New York State or have proof of legal presence in the U.S.
7. Identification: You must provide proof of your identity, Social Security number, and residency or legal presence.
It's important to note that additional endorsements may be required for certain types of vehicles or cargo, such as Hazmat (H) or Tank (T) endorsements for tanker trucks carrying hazardous materials.
In New York State, the minimum age requirement for a Class A CDL license is 18 years old. However, if you are 18 to 20 years old, you will be restricted to intrastate driving only, which means you cannot drive a commercial vehicle outside of New York State. If you are 21 years old or older, you may drive a commercial vehicle interstate (across state lines). Keep in mind that some companies may have additional age requirements for their drivers, so it's important to check with your employer before pursuing a CDL license.
Yes, you may need endorsements for a Class A CDL license depending on the type of vehicle you plan to operate and the type of cargo you plan to transport. Some common endorsements for a Class A CDL license include:
1. Hazmat (H): This endorsement is required if you plan to transport hazardous materials.
2. Tank (T): This endorsement is required if you plan to transport liquid or gaseous materials in a tank vehicle.
3. Double/Triple (T): This endorsement is required if you plan to operate a double or triple trailer combination.
4. Passenger (P): This endorsement is required if you plan to transport passengers, such as in a bus or van.
5. School Bus (S): This endorsement is required if you plan to drive a school bus.
6. Air Brakes (A): This endorsement is required if the vehicle you plan to drive has air brakes.
To obtain an endorsement, you must pass an additional knowledge test and, in some cases, a skills test. It's important to note that some endorsements require additional background checks or security clearances, such as the Hazmat endorsement.
1. Hazmat (H): This endorsement is required if you plan to transport hazardous materials.
2. Tank (T): This endorsement is required if you plan to transport liquid or gaseous materials in a tank vehicle.
3. Double/Triple (T): This endorsement is required if you plan to operate a double or triple trailer combination.
4. Passenger (P): This endorsement is required if you plan to transport passengers, such as in a bus or van.
5. School Bus (S): This endorsement is required if you plan to drive a school bus.
6. Air Brakes (A): This endorsement is required if the vehicle you plan to drive has air brakes.
To obtain an endorsement, you must pass an additional knowledge test and, in some cases, a skills test. It's important to note that some endorsements require additional background checks or security clearances, such as the Hazmat endorsement.
The Class A CDL skills test in New York State consists of three parts: the pre-trip inspection, the basic vehicle control skills test, and the on-road driving test. Here's what's involved in each part:
1. Pre-trip inspection: This is a thorough inspection of the vehicle to ensure that it is safe to operate. You will be asked to explain and demonstrate how to inspect various parts of the vehicle, including the engine compartment, air brakes, steering mechanism, and trailer coupling.
2. Basic vehicle control skills test: This test assesses your ability to control the vehicle in various maneuvers such as backing up, turning, and parking. You will be asked to complete exercises such as straight line backing, offset backing, parallel parking, and alley docking.
3. On-road driving test: This test evaluates your ability to safely operate the vehicle on public roads and highways. You will be asked to drive a predetermined route while following all traffic laws and signals, changing lanes, merging onto highways, and making turns.
To pass the Class A CDL skills test in New York State, you must successfully complete all three parts with a score of at least 80%. It's important to note that you must have a valid commercial learner's permit (CLP) and have held it for at least 14 days before taking the skills test.
1. Pre-trip inspection: This is a thorough inspection of the vehicle to ensure that it is safe to operate. You will be asked to explain and demonstrate how to inspect various parts of the vehicle, including the engine compartment, air brakes, steering mechanism, and trailer coupling.
2. Basic vehicle control skills test: This test assesses your ability to control the vehicle in various maneuvers such as backing up, turning, and parking. You will be asked to complete exercises such as straight line backing, offset backing, parallel parking, and alley docking.
3. On-road driving test: This test evaluates your ability to safely operate the vehicle on public roads and highways. You will be asked to drive a predetermined route while following all traffic laws and signals, changing lanes, merging onto highways, and making turns.
To pass the Class A CDL skills test in New York State, you must successfully complete all three parts with a score of at least 80%. It's important to note that you must have a valid commercial learner's permit (CLP) and have held it for at least 14 days before taking the skills test.
Yes, there are restrictions and limitations for drivers with a Class A CDL license in New York State. Here are some of the most common ones:
1. Weight restrictions: Drivers with a Class A CDL license may be restricted from operating vehicles over a certain weight limit, depending on their endorsement and the type of vehicle they are driving.
2. Passenger restrictions: Drivers with a Class A CDL license may be restricted from transporting passengers, depending on their endorsement and the type of vehicle they are driving.
3. Time restrictions: Drivers with a Class A CDL license may be subject to time restrictions, such as limits on how many hours they can drive in a day or week. These restrictions are designed to prevent fatigue and ensure that drivers are operating vehicles safely.
4. Equipment restrictions: Drivers with a Class A CDL license may be restricted from operating vehicles with certain types of equipment, depending on their endorsement and the type of cargo they are transporting.
It's important to note that these restrictions and limitations vary depending on the driver's specific situation and endorsements. It's crucial for drivers to understand their limitations and remain in compliance with all relevant rules and regulations to ensure safe operation of their vehicles.
1. Weight restrictions: Drivers with a Class A CDL license may be restricted from operating vehicles over a certain weight limit, depending on their endorsement and the type of vehicle they are driving.
2. Passenger restrictions: Drivers with a Class A CDL license may be restricted from transporting passengers, depending on their endorsement and the type of vehicle they are driving.
3. Time restrictions: Drivers with a Class A CDL license may be subject to time restrictions, such as limits on how many hours they can drive in a day or week. These restrictions are designed to prevent fatigue and ensure that drivers are operating vehicles safely.
4. Equipment restrictions: Drivers with a Class A CDL license may be restricted from operating vehicles with certain types of equipment, depending on their endorsement and the type of cargo they are transporting.
It's important to note that these restrictions and limitations vary depending on the driver's specific situation and endorsements. It's crucial for drivers to understand their limitations and remain in compliance with all relevant rules and regulations to ensure safe operation of their vehicles.
Yes, you can take the Class A CDL written test in a language other than English in New York State. The New York State Department of Motor Vehicles (DMV) offers the written test in several languages, including Spanish, French, and Chinese, among others. However, it's important to note that the on-road driving test must be taken in English.
To take the written test in a language other than English, you must make an appointment at a DMV office that offers the test in your preferred language. You will need to provide identification and proof of your ability to read and understand the language you are requesting. The DMV will provide an interpreter to assist you during the test if necessary.
It's important to note that even if you take the written test in a language other than English, you will still need to have a basic understanding of English in order to operate a commercial vehicle safely on public roads.
To take the written test in a language other than English, you must make an appointment at a DMV office that offers the test in your preferred language. You will need to provide identification and proof of your ability to read and understand the language you are requesting. The DMV will provide an interpreter to assist you during the test if necessary.
It's important to note that even if you take the written test in a language other than English, you will still need to have a basic understanding of English in order to operate a commercial vehicle safely on public roads.
Yes, you can request accommodations for the Class A CDL written test due to a disability in New York State. The New York State Department of Motor Vehicles (DMV) provides accommodations to individuals with disabilities in accordance with the Americans with Disabilities Act (ADA).
To request accommodations for the written test, you will need to fill out a Request for Reasonable Accommodations form and submit it to the DMV. The form can be obtained online or at a DMV office. You will need to provide documentation of your disability and describe the specific accommodations you need.
Common accommodations that may be provided include extra time to complete the test, a separate testing room, or assistance from a reader or scribe. The DMV will review your request and determine what accommodations can be provided based on your specific needs and the requirements of the test.
It's important to note that you must request accommodations in advance and provide documentation of your disability. Accommodations cannot be provided on the day of the test without prior approval from the DMV.
To request accommodations for the written test, you will need to fill out a Request for Reasonable Accommodations form and submit it to the DMV. The form can be obtained online or at a DMV office. You will need to provide documentation of your disability and describe the specific accommodations you need.
Common accommodations that may be provided include extra time to complete the test, a separate testing room, or assistance from a reader or scribe. The DMV will review your request and determine what accommodations can be provided based on your specific needs and the requirements of the test.
It's important to note that you must request accommodations in advance and provide documentation of your disability. Accommodations cannot be provided on the day of the test without prior approval from the DMV.
Yes, you can retake the Class A CDL written test if you fail it in New York State. If you fail the test, you will need to wait at least one day before you can retake it. You will be required to pay the testing fee each time you take the test.
It's important to note that if you fail the test three times, you will need to wait at least 90 days before you can retake it. Additionally, if your learner's permit expires before you pass the written and road tests, you may need to start the application process over and reapply for a new permit.
To prepare for the written test, it's recommended that you study the New York State Commercial Driver's Manual and take practice tests. The DMV website provides free practice tests that can help you prepare for the written exam.
If you continue to have difficulty passing the written test after multiple attempts, consider seeking additional resources such as a commercial driving school or a tutor to help improve your understanding of the materials.
It's important to note that if you fail the test three times, you will need to wait at least 90 days before you can retake it. Additionally, if your learner's permit expires before you pass the written and road tests, you may need to start the application process over and reapply for a new permit.
To prepare for the written test, it's recommended that you study the New York State Commercial Driver's Manual and take practice tests. The DMV website provides free practice tests that can help you prepare for the written exam.
If you continue to have difficulty passing the written test after multiple attempts, consider seeking additional resources such as a commercial driving school or a tutor to help improve your understanding of the materials.
