Tank
This endorsement is required to haul any liquid or gaseous materials in a tank or tanks having a capacity of 1,000 gallons or more that is either permanently or temporarily attached to the vehicle or chassis. To receive this endorsement, applicants must pass a test. The test consists of 20 multiple choice questions. Each question has four answer choices. To pass, the applicant must answer at least 16questions correctly. Test questions come from the New York State Commercial Motor Vehicle Drivers Handbook. Questions come from chapters covering: Driving Safely, Combination Vehicles and Doubles and Triples. The Tank endorsement can be used with the Class A, B or C CDL.
Number of Question
Passing Score
1. What does the air compressor governor do?
Explanation
In an air brake system, the air compressor governor controls when the air compressor pumps air into the air storage tanks.
2. Be sure you are always driving so your vehicle can stop:
Explanation
Always be sure that you are driving in a manner that will allow your vehicle to come to a complete stop, if necessary, within the area of the road ahead that you are able to see.
3. Multi-speed axles and auxiliary transmissions are used:
Explanation
On many vehicles, multi-speed rear axles and auxiliary transmissions are used to provide extra gears. They are usually controlled by a selector knob on the gearshift lever.
4. When traveling with Division 1.1, 1.2, or 1.3 explosives, the vehicle should not be:
Explanation
Except when parking briefly to perform necessary functions for vehicle operation (such as refueling), never park a vehicle carrying Division 1.1, 1.2, or 1.3 explosives within 300 feet of a bridge, tunnel, or building. Never park such a vehicle within five feet of the traveled portion of a road. Such vehicles should be parked only briefly.
5. Which of the following is not a tire problem to check for and avoid?
Explanation
During an inspection, there are a number of tire problems to check for and avoid. Look for air pressure that is too low or too high; excessive wear; cuts or other damage; tread separation; dual tires that come into contact with each other or other parts of the vehicle; mismatched tire sizes; radial and bias-ply tires used together; cut or cracked valve stems; and regrooved, recapped, or retreaded tires on the front wheels of a school bus.
6. A vehicle should be equipped with all of the following, except:
Explanation
Commercial vehicles should always carry the proper emergency equipment. Be sure your vehicle is equipped with at least one fire extinguisher; spare electrical fuses, unless the vehicle is equipped with circuit breakers; and warning devices for parked vehicles, such as warning triangles, fuses, or liquid burning flares.
7. What is the average driver’s reaction time?
Explanation
The average driver has a reaction time of between three-quarters of a second and one second.
Ranked by best match
Frequently Asked Questions
To obtain a CDL Tank endorsement in New York, you will need to follow these steps:
1. Obtain a valid New York State CDL: You must have a valid New York State commercial driver's license (CDL) before applying for a Tank endorsement.
2. Study for the Tank endorsement knowledge test: You will need to study the Tank endorsement section of the New York State Commercial Driver's Manual and take and pass the knowledge test at a DMV office.
3. Pass a background check: You will be required to pass a background check before being issued a Tank endorsement.
4. Pass a skills test: After passing the knowledge test and obtaining your Tank endorsement, you must pass a skills test in a vehicle that requires a Tank endorsement.
5. Submit required documents: You will be required to submit several documents, including your current CDL license, proof of identity, proof of residency, and medical certification.
6. Pay the required fees: There are fees associated with obtaining a Tank endorsement, and they vary depending on whether you are applying for an initial or renewal endorsement.
Once you have completed all of these steps, you will be issued a Tank endorsement on your CDL license.
1. Obtain a valid New York State CDL: You must have a valid New York State commercial driver's license (CDL) before applying for a Tank endorsement.
2. Study for the Tank endorsement knowledge test: You will need to study the Tank endorsement section of the New York State Commercial Driver's Manual and take and pass the knowledge test at a DMV office.
3. Pass a background check: You will be required to pass a background check before being issued a Tank endorsement.
4. Pass a skills test: After passing the knowledge test and obtaining your Tank endorsement, you must pass a skills test in a vehicle that requires a Tank endorsement.
5. Submit required documents: You will be required to submit several documents, including your current CDL license, proof of identity, proof of residency, and medical certification.
6. Pay the required fees: There are fees associated with obtaining a Tank endorsement, and they vary depending on whether you are applying for an initial or renewal endorsement.
Once you have completed all of these steps, you will be issued a Tank endorsement on your CDL license.
To obtain a CDL Tank endorsement in New York, you must meet the following requirements:
1. Be at least 18 years old: You must be at least 18 years old to operate a commercial vehicle within New York State and at least 21 years old to operate a commercial vehicle across state lines.
2. Hold a valid New York State CDL: You must already have a valid New York State Commercial Driver's License (CDL) before applying for a Tank endorsement.
3. Pass the CDL Tank endorsement knowledge test: You must pass the Tank endorsement knowledge test at a DMV office. The test covers information on the safe operation of tank vehicles, including cargo handling and tank vehicle inspection.
4. Pass a background check: You will be required to pass a background check before being issued a Tank endorsement.
5. Pass the CDL Tank skills test: After passing the knowledge test and obtaining your Tank endorsement, you must pass a skills test in a vehicle that requires a Tank endorsement.
6. Submit required documents: You will need to submit several documents such as your current CDL license, proof of identity, proof of residency, and medical certification.
7. Pay the required fees: There are fees associated with obtaining a Tank endorsement, and they vary depending on whether you are applying for an initial or renewal endorsement.
Meeting these requirements will allow you to obtain a CDL Tank endorsement in New York and legally operate tank vehicles as part of your commercial driving duties.
1. Be at least 18 years old: You must be at least 18 years old to operate a commercial vehicle within New York State and at least 21 years old to operate a commercial vehicle across state lines.
2. Hold a valid New York State CDL: You must already have a valid New York State Commercial Driver's License (CDL) before applying for a Tank endorsement.
3. Pass the CDL Tank endorsement knowledge test: You must pass the Tank endorsement knowledge test at a DMV office. The test covers information on the safe operation of tank vehicles, including cargo handling and tank vehicle inspection.
4. Pass a background check: You will be required to pass a background check before being issued a Tank endorsement.
5. Pass the CDL Tank skills test: After passing the knowledge test and obtaining your Tank endorsement, you must pass a skills test in a vehicle that requires a Tank endorsement.
6. Submit required documents: You will need to submit several documents such as your current CDL license, proof of identity, proof of residency, and medical certification.
7. Pay the required fees: There are fees associated with obtaining a Tank endorsement, and they vary depending on whether you are applying for an initial or renewal endorsement.
Meeting these requirements will allow you to obtain a CDL Tank endorsement in New York and legally operate tank vehicles as part of your commercial driving duties.
Yes, you will need to have specific training and experience to obtain a CDL Tank endorsement in New York. The Federal Motor Carrier Safety Administration (FMCSA) has established specific training requirements for drivers who operate tank vehicles. These requirements include:
1. Completion of a CDL Tank endorsement training program: You must complete a training program that covers the safe operation of tank vehicles, including cargo handling, tank vehicle inspection, and emergency procedures.
2. Completion of a skills test: You must pass a skills test in a vehicle that requires a Tank endorsement. This test will evaluate your ability to operate the vehicle safely and effectively.
3. Completion of an on-the-job training program: New drivers are required to complete an on-the-job training program that includes supervised driving time with an experienced tank vehicle driver.
4. Meeting medical requirements: You must meet specific medical requirements to obtain a Tank endorsement, including passing a medical examination and carrying a medical examiner's certificate.
In addition to these requirements, you may also need to obtain additional endorsements or certifications depending on the type of cargo you will be transporting in your tank vehicle. For example, if you plan to transport hazardous materials, you will need to obtain a Hazmat endorsement in addition to your Tank endorsement.
Overall, obtaining a CDL Tank endorsement requires specialized training and experience to ensure safe operation of tank vehicles on the roadways.
1. Completion of a CDL Tank endorsement training program: You must complete a training program that covers the safe operation of tank vehicles, including cargo handling, tank vehicle inspection, and emergency procedures.
2. Completion of a skills test: You must pass a skills test in a vehicle that requires a Tank endorsement. This test will evaluate your ability to operate the vehicle safely and effectively.
3. Completion of an on-the-job training program: New drivers are required to complete an on-the-job training program that includes supervised driving time with an experienced tank vehicle driver.
4. Meeting medical requirements: You must meet specific medical requirements to obtain a Tank endorsement, including passing a medical examination and carrying a medical examiner's certificate.
In addition to these requirements, you may also need to obtain additional endorsements or certifications depending on the type of cargo you will be transporting in your tank vehicle. For example, if you plan to transport hazardous materials, you will need to obtain a Hazmat endorsement in addition to your Tank endorsement.
Overall, obtaining a CDL Tank endorsement requires specialized training and experience to ensure safe operation of tank vehicles on the roadways.
Yes, in addition to the general knowledge test and the skills test required for a CDL license, you will need to pass a written test specifically for the Tank endorsement. The Tank endorsement test is designed to evaluate your knowledge of the safe operation of tank vehicles.
The Tank endorsement test covers topics such as:
1. Inspecting tank vehicles, including identifying potential hazards and checking tank components such as valves and hoses.
2. Proper loading and unloading procedures for tanks, including how to handle different types of liquids or gases.
3. Safe driving practices for tank vehicles, such as how to handle turns, speed control, and braking.
4. Emergency procedures in case of an accident or spill, including how to safely evacuate the vehicle and contain any spills.
The Tank endorsement test is a multiple-choice exam that you will take at a New York State Department of Motor Vehicles (DMV) office. You must pass this test with a score of at least 80% to obtain your Tank endorsement.
It's important to note that obtaining a Tank endorsement also requires completing a skills test in a vehicle that requires a Tank endorsement. This skills test is designed to evaluate your ability to safely operate a tank vehicle, including loading and unloading procedures and emergency response practices.
The Tank endorsement test covers topics such as:
1. Inspecting tank vehicles, including identifying potential hazards and checking tank components such as valves and hoses.
2. Proper loading and unloading procedures for tanks, including how to handle different types of liquids or gases.
3. Safe driving practices for tank vehicles, such as how to handle turns, speed control, and braking.
4. Emergency procedures in case of an accident or spill, including how to safely evacuate the vehicle and contain any spills.
The Tank endorsement test is a multiple-choice exam that you will take at a New York State Department of Motor Vehicles (DMV) office. You must pass this test with a score of at least 80% to obtain your Tank endorsement.
It's important to note that obtaining a Tank endorsement also requires completing a skills test in a vehicle that requires a Tank endorsement. This skills test is designed to evaluate your ability to safely operate a tank vehicle, including loading and unloading procedures and emergency response practices.
The CDL Tank endorsement written test covers a range of topics related to the safe operation of tank vehicles. Some of the topics that are covered in the Tank endorsement test include:
1. Vehicle Inspection: This includes knowledge of how to perform a pre-trip inspection of the tank vehicle and recognizing potential hazards.
2. Tank Vehicle Safety: This includes safe driving practices, such as maintaining proper speed, braking, and handling techniques for turns.
3. Cargo Handling: This includes knowledge of how to load and unload cargo safely and properly, including hazardous materials.
4. Emergency Procedures: This includes knowledge of what to do in case of an accident or spill, including how to evacuate the vehicle safely and contain any spills.
5. Regulations: This includes knowledge of federal and state regulations related to the transportation of hazardous materials.
The Tank endorsement test is a multiple-choice exam that you will take at a New York State Department of Motor Vehicles (DMV) office. You must pass this test with a score of at least 80% to obtain your Tank endorsement. It's important to study these topics thoroughly before taking the exam in order to pass and obtain your Tank endorsement.
1. Vehicle Inspection: This includes knowledge of how to perform a pre-trip inspection of the tank vehicle and recognizing potential hazards.
2. Tank Vehicle Safety: This includes safe driving practices, such as maintaining proper speed, braking, and handling techniques for turns.
3. Cargo Handling: This includes knowledge of how to load and unload cargo safely and properly, including hazardous materials.
4. Emergency Procedures: This includes knowledge of what to do in case of an accident or spill, including how to evacuate the vehicle safely and contain any spills.
5. Regulations: This includes knowledge of federal and state regulations related to the transportation of hazardous materials.
The Tank endorsement test is a multiple-choice exam that you will take at a New York State Department of Motor Vehicles (DMV) office. You must pass this test with a score of at least 80% to obtain your Tank endorsement. It's important to study these topics thoroughly before taking the exam in order to pass and obtain your Tank endorsement.
Yes, to obtain a CDL Tank endorsement, you must also pass a skills test in addition to the written test. During the skills test, you will need to demonstrate your ability to safely operate a tank vehicle. The skills test will include specific maneuvers that you must perform correctly and safely. Some of the maneuvers that may be included in the Tank endorsement skills test are:
1. Pre-trip inspection: You will need to perform a thorough inspection of your tank vehicle and identify any potential safety hazards.
2. Straight-line backing: You will need to back the tank vehicle in a straight line for a distance of at least 50 feet.
3. Offset backing: You will need to back the tank vehicle into a space that is offset to the right or left of your starting position.
4. Alley docking: You will need to back the tank vehicle into an alley or other confined space.
5. Driving skills: You will need to demonstrate safe driving skills, such as turning, accelerating, braking, and changing lanes.
6. Emergency procedures: You will need to demonstrate knowledge of emergency procedures, such as how to respond in case of an accident or spill.
It's important to note that the specific maneuvers included in the Tank endorsement skills test may vary depending on your location and other factors. Be sure to check with your local DMV office for specific information about what you can expect during the Tank endorsement skills test.
1. Pre-trip inspection: You will need to perform a thorough inspection of your tank vehicle and identify any potential safety hazards.
2. Straight-line backing: You will need to back the tank vehicle in a straight line for a distance of at least 50 feet.
3. Offset backing: You will need to back the tank vehicle into a space that is offset to the right or left of your starting position.
4. Alley docking: You will need to back the tank vehicle into an alley or other confined space.
5. Driving skills: You will need to demonstrate safe driving skills, such as turning, accelerating, braking, and changing lanes.
6. Emergency procedures: You will need to demonstrate knowledge of emergency procedures, such as how to respond in case of an accident or spill.
It's important to note that the specific maneuvers included in the Tank endorsement skills test may vary depending on your location and other factors. Be sure to check with your local DMV office for specific information about what you can expect during the Tank endorsement skills test.
Yes, there are restrictions and limitations that apply to drivers with a CDL Tank endorsement. The specific restrictions and limitations vary depending on the type of tank vehicle you are driving and the type of cargo you are transporting. Here are some general restrictions and limitations that may apply:
1. Hazardous materials: If you are transporting hazardous materials in a tank vehicle, you must comply with federal and state regulations related to the handling and transportation of hazardous materials.
2. Weight limits: Tank vehicles may have weight restrictions that limit the amount of cargo they can carry.
3. Endorsement requirements: Some tank vehicles require additional endorsements or certifications beyond the Tank endorsement, such as the Hazmat endorsement or the Passenger endorsement.
4. Speed limits: Tank vehicles may have lower speed limits than other types of commercial vehicles, especially when carrying hazardous materials.
5. Parking restrictions: Tank vehicles may be subject to additional parking restrictions, especially in urban areas or near sensitive locations such as schools or hospitals.
It's important to be aware of these restrictions and limitations when operating a tank vehicle with a CDL Tank endorsement. Failure to comply with these regulations can result in fines, license suspension, or other penalties.
1. Hazardous materials: If you are transporting hazardous materials in a tank vehicle, you must comply with federal and state regulations related to the handling and transportation of hazardous materials.
2. Weight limits: Tank vehicles may have weight restrictions that limit the amount of cargo they can carry.
3. Endorsement requirements: Some tank vehicles require additional endorsements or certifications beyond the Tank endorsement, such as the Hazmat endorsement or the Passenger endorsement.
4. Speed limits: Tank vehicles may have lower speed limits than other types of commercial vehicles, especially when carrying hazardous materials.
5. Parking restrictions: Tank vehicles may be subject to additional parking restrictions, especially in urban areas or near sensitive locations such as schools or hospitals.
It's important to be aware of these restrictions and limitations when operating a tank vehicle with a CDL Tank endorsement. Failure to comply with these regulations can result in fines, license suspension, or other penalties.
No, you cannot transport liquid or gas materials in a tank vehicle without a CDL Tank endorsement. The Tank endorsement is required by federal and state law for drivers who operate tank vehicles that transport liquid or gas materials. The Tank endorsement is designed to ensure that drivers have the knowledge and skills necessary to safely operate tank vehicles and transport hazardous materials.
In addition to the Tank endorsement, drivers who transport hazardous materials may also need to obtain a Hazmat endorsement. The Hazmat endorsement is required for drivers who transport hazardous materials that require placards under federal regulations.
It's important to note that there are significant penalties for operating a tank vehicle without the proper endorsements. These can include fines, license suspension, and even criminal charges in some cases. So if you are planning to transport liquid or gas materials in a tank vehicle, make sure you obtain the proper endorsements before you start driving.
In addition to the Tank endorsement, drivers who transport hazardous materials may also need to obtain a Hazmat endorsement. The Hazmat endorsement is required for drivers who transport hazardous materials that require placards under federal regulations.
It's important to note that there are significant penalties for operating a tank vehicle without the proper endorsements. These can include fines, license suspension, and even criminal charges in some cases. So if you are planning to transport liquid or gas materials in a tank vehicle, make sure you obtain the proper endorsements before you start driving.
You can add the CDL Tank endorsement to your existing CDL license by passing the required knowledge and skills tests and paying the appropriate fees. You do not need to apply for a new license.
To add the Tank endorsement, you will need to pass a written knowledge test that covers topics such as tanker vehicle inspection, safety, and loading and unloading procedures. You will also need to pass a skills test that demonstrates your ability to safely operate a tank vehicle.
Once you have passed both tests, you can bring your test results and any other required documentation to your local Department of Motor Vehicles (DMV) office to have the Tank endorsement added to your CDL license. You will need to pay the appropriate fees at that time.
It's important to note that adding a Tank endorsement may also require you to obtain additional certifications or endorsements, such as the Hazmat endorsement or the Passenger endorsement, depending on the type of tank vehicle you plan to operate. Be sure to check with your state's DMV or licensing agency for specific requirements.
To add the Tank endorsement, you will need to pass a written knowledge test that covers topics such as tanker vehicle inspection, safety, and loading and unloading procedures. You will also need to pass a skills test that demonstrates your ability to safely operate a tank vehicle.
Once you have passed both tests, you can bring your test results and any other required documentation to your local Department of Motor Vehicles (DMV) office to have the Tank endorsement added to your CDL license. You will need to pay the appropriate fees at that time.
It's important to note that adding a Tank endorsement may also require you to obtain additional certifications or endorsements, such as the Hazmat endorsement or the Passenger endorsement, depending on the type of tank vehicle you plan to operate. Be sure to check with your state's DMV or licensing agency for specific requirements.
Yes, there are specific requirements and regulations that apply to drivers with a CDL Tank endorsement who transport hazardous materials.
Some of the key requirements and regulations include:
1. Hazmat endorsement: In addition to the Tank endorsement, drivers who transport hazardous materials must also have a Hazmat endorsement on their CDL license.
2. Training: All drivers who transport hazardous materials must receive specialized training in the safe handling and transportation of these materials.
3. Placarding: Tank vehicles that transport hazardous materials must display placards that indicate the type of material being transported.
4. Inspection and maintenance: Tank vehicles must be inspected and maintained regularly to ensure that they are in safe operating condition.
5. Loading and unloading procedures: Drivers must follow specific procedures for loading and unloading tank vehicles to ensure that spills or releases do not occur.
6. Emergency response: Drivers must be trained in emergency response procedures in case of an accident or release of hazardous materials.
7. Recordkeeping: Drivers must keep detailed records of their transportation activities, including the types of materials transported, the quantities, and any incidents or accidents that occur.
It's important for drivers with a CDL Tank endorsement who transport hazardous materials to understand and comply with these requirements and regulations to ensure safety on the roadways.
Some of the key requirements and regulations include:
1. Hazmat endorsement: In addition to the Tank endorsement, drivers who transport hazardous materials must also have a Hazmat endorsement on their CDL license.
2. Training: All drivers who transport hazardous materials must receive specialized training in the safe handling and transportation of these materials.
3. Placarding: Tank vehicles that transport hazardous materials must display placards that indicate the type of material being transported.
4. Inspection and maintenance: Tank vehicles must be inspected and maintained regularly to ensure that they are in safe operating condition.
5. Loading and unloading procedures: Drivers must follow specific procedures for loading and unloading tank vehicles to ensure that spills or releases do not occur.
6. Emergency response: Drivers must be trained in emergency response procedures in case of an accident or release of hazardous materials.
7. Recordkeeping: Drivers must keep detailed records of their transportation activities, including the types of materials transported, the quantities, and any incidents or accidents that occur.
It's important for drivers with a CDL Tank endorsement who transport hazardous materials to understand and comply with these requirements and regulations to ensure safety on the roadways.
